bing tracking image
  1. Trailer Tires and Wheels
  2. Kenda
  3. 13 Inch
  4. Tire with Wheel
  5. 4 on 4 Inch
  6. 175/80-13
Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range C
Kenda

Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range C

Part Number: AM3S130
In Stock
$123.80
Trailer Tires and Wheels
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Bias tire has a ply rating of 6 and a 1,360-lb maximum load at 50 psi. The 13" diameter x 4-1/2" wide steel trailer wheel features a 4 on 4 bolt pattern and a corrosion-resistant galvanized finish. Great Prices for the best trailer tires and wheels from Kenda. Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range C part number AM3S130 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (7221)
  • Q & A (0)
  • Photos

Kenda Trailer Tires and Wheels - AM3S130

  • 13 Inch
  • Tire with Wheel
  • 4 on 4 Inch
  • 175/80-13
  • Load Range C
  • Steel Wheels - Galvanized
  • Bias Ply Tire
  • M - 81 mph
  • Kenda

Bias tire has a ply rating of 6 and a 1,360-lb maximum load at 50 psi. The 13" diameter x 4-1/2" wide steel trailer wheel features a 4 on 4 bolt pattern and a corrosion-resistant galvanized finish.


Features:

  • Loadstar special trailer tire outshines other bias tires
    • Flatter tread offers improved stability for excellent handling
    • Special trailer tire design
      • Couples the strength of a bias tire with the durability and stability of a radial tire
      • Created specifically for trailers and not intended for use on other vehicles
    • Advanced rubber compound
      • Longer tread wear
      • Low rolling resistance for smooth ride
  • Steel wheel has 8-spoke design
    • Galvanized to resist rust
  • Tire-and-wheel assembly meets Department of Transportation specifications


Specs:

  • Rim dimensions: 13" diameter x 4-1/2" wide
  • Bolt pattern: 4 on 4"
  • Wheel capacity: 1,660 lbs
  • Wheel bolt size: 1/2"-20
  • Offset: 0
  • Pilot diameter: 2.65"
  • Tire size: ST175/80D13
    • Section width: 6.6"
    • Outer diameter: 24"
  • Tire capacity:
    • Load range: C
    • Ply rating: 6
    • Maximum load: 1,360 lbs at 50 psi
  • Maximum speed: 81 mph (speed rating M)
  • Warranty:
    • 5-Year on tire
    • Limited 2-year on wheel


1-Year Worry-Free Guarantee

This tire has a 1-year worry-free guarantee. If within the first 12 months the tire is damaged in any way, it will be replaced at no charge.


Bias Tires vs. Radial Tires

Bias vs. radial tire graphic

Bias ply tires are designed for off-road or agricultural applications. They are built with thick, durable nylon cords that are positioned at a 30- to 45-degree angle to the direction of travel. The layers alternate in a crisscross pattern, making the sidewalls stiffer so that the entire tire is able to flex easily. As a result, the tire provides a smooth ride and improved handling when trailering on uneven surfaces.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Side

Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"




3S130 8-Spoke 12" Galvanized Wheel and Loadstar K550 Bias Tire - LR C





Customer Satisfaction Score:

Ratings & Reviews

4.8

3684 reviews
5 Stars
(3217)
4 Stars
(300)
3 Stars
(65)
2 Stars
(36)
1 Star
(66)
Bias tire has a ply rating of 6 and a 1,360-lb maximum load at 50 psi. The 13" diameter x 4-1/2" wide steel trailer wheel features a 4 on 4 bolt pattern and a corrosion-resistant galvanized finish.

by:

Quick shipping and service



by:

Great coustomer service. I ordered the wrong items. They made it very easy to return and sent me the correct items.



by:

Seriously this company takes it to another level. Glad to see such great things coming from the state of Missouri. Amazing company.



by:

Good product,quick delivery. Excellent replacement.



by:

Good price quick shipping.



by:

The exact tire I needed for my trailer. Appears to be good quality.



by:

Exactly what I ordered, shipped quickly, well packaged. Thanks!



by:

As described, easy web site, on time delivery. Good value



by:

Fast and Easy Shipping!



by:

These are good looking tires at good price.
Shiping
was very fast.



by:

Great customer service. Product as described . Quick delivery



by:

Wonderful, timely service; though, product had blemishes on the actual wheels.



by:

Good prices and fast delivery with quality parts



by:

Fast shipping great price



by:

Fast shipping



by:

Impressed by how fast I received my order from the time ordered.



by:

Wheels arrived on time, properly inflated, and went on my trailer right away. Good job!



by:

This tire was a perfect replacement. It arrived fast and was well packed. Great folks to do business with.



by:

Great service!!



by:

Great combo. Put a few thousand miles on these last summer and I couldn't be happier. The bead came securely seated (no annoying slow leaks). These things held their pressure all summer and wore like they should.



by:

Great fast shipping



by:

Good product, easy purchase, fast delivery and very good price. E trailer is the best I have found



by:

This tire and rim set look like they will work well. I purchased it to use as a spare for my trailer. The price was less than a large sporting goods store.



by:

Good service, nice product, prompt delivery, courteous customer service ....



by:

Great and fast shipping


25
3684
Show More Reviews

See what our Experts say about this Kenda Trailer Tires and Wheels

  • Spare Tire Needed For A 155/80R13 Tire Size
    Hey John, It looks like we don't offer that specific tire size so we wouldn't be able to offer you just a spare. If you wanted to switch out your wheels/tires completely and get an extra spare then the closest option with a 4 on 4 wheel bolt pattern would be the 175/80R13 which is 24.02" in diameter and 6.89" wide compared to your current 22.76" diameter and 6.10" width. If you wanted to go this route so that you would need to check your clearance from the wheels horizontally to the...
    view full answer...
    Image 1 for
  • Size Difference Between 4.80-12 Tires and 175/80-13 Tires
    A 4.80-12 trailer tire and wheel such as the Kenda # AM30630, when inflated will measure 20.7 inches in diameter and have a width of 4.9 inches. A 175/80-13 trailer tire and wheel will measure 24 inches in diameter and have a width of 6.6 inches so you do need to measure to ensure you have the necessary clearance. A great option for a 175/80-13 trailer tire and wheel with a 4 on 4" bolt pattern is the Loadstar # AM3S130 which has a galvanized wheel or the Loadstar # AM3S120 which has...
    view full answer...
  • Can Trailer Tire Size 20.5x8-10 be Upgraded to 13 inch Tire Size
    Hey Paul, so your current tire size is 20.5 inch in diameter and the smallest diameter 13 inch trailer tire diameter is 175/80-13 which is 24.1 inches. So that is a difference of 3.6 inches and since that gets split on either side of your wheel diameter you'd lose fender clearance by 1.8 inches. Most likely that's not a big deal but you'd want to measure to be sure. The part # AM31990 would work great if the bolt pattern is 5 on 4-1/2 inch or part # AM3S130 if you have a 4 lug bolt pattern.
    view full answer...
  • Does the 13" Galvanized Wheel w/ a 4 on 4 Lug Pattern Fit a Hub w/ Lugs 4" On Center?
    Yes, they will Chris. The Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel item # AM3S130 will indeed fit a 4 lug wheel with 4" center on center lug spacing. This combo comes with a load range C tire with a 1,360 lbs at 50 psi. It has a top highway speed of 81 mph. Is this for a boat trailer?
    view full answer...
  • Looking For Basic Lightweight Spare Tire For Aluma 5x8 Open Utility Trailer Model 638
    Hey Kam, I sure can! Looking at the online spec sheet, that Aluma 5 X 8 open utility trailer uses 175/80-13 radial tires with aluminum wheels and 5 on 4-1/2" bolt pattern. Here are a couple options for a spare: - Karrier ST175/80R13 Radial Trailer Tire with 13" Aluminum Wheel - 5 on 4-1/2 - Load Range C # AM31959 - Karrier ST175/80R13 Radial Trailer Tire with 13" White Wheel - 5 on 4-1/2 - Load Range C # AM31951 - Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 5 on...
    view full answer...
  • Looking To Put Larger Rims On Trailer
    Hello Cristian, thanks for reaching out. Based on the measurements you provided it sounds like you have either the 5 on 4-3/4" bolt pattern or the 5 on 5" bolt pattern both of which are pretty uncommon. I do suggest you measure again and double check that bolt pattern. Take a look at the screenshot I included below. It shows three different ways to measure the 5-bolt pattern. Personally, I prefer options 1 and 3 since they are the most accurate. Once we have that nailed down, we can...
    view full answer...
  • Is There a Recommended Pilot Hole Diameter for the 2K Easy Grease Trailer Idler Hub Assembly?
    Hey Tim! Hubs like the Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-2-LFEZ-1K don't have a listed pilot hole diameter they fit with, but basically anything bigger than 2.5" will fit with this. Any 13" to 15" wheel will have a large enough pilot diameter. For example, the Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel # AM3S130 has a 2.65" pilot hole diameter and will fit perfectly with this hub. Do you have a smaller pilot hub and you're trying to see if this...
    view full answer...
  • Can Tires on 2002 Karavan Trailer Be Upgraded to Larger Size
    Hi Nadim; you will need to measure your existing clearance to see if this is possible. Moving to a 5.30-12 like the # AM30710 you were looking at will result in about 1/2" of clearance lost. This probably won't be a problem. An ST175/80D13 like # AM3S130 will be quite a bit larger so you would lose more like 2" of clearance which is quite a lot. You want at least 3" on top and 2" on the inside of the tire for proper clearance. Both of those wheels have a 4 on 4 bolt pattern. If you have...
    view full answer...
  • Can I Upgrade the 4.80-12 Wheels and Tires on a Northern Tool Ironton Trailer
    I'll start out by saying that we don't have specific specs on a Northern Tool Ironton trailer but I was able to locate a photo and because of the fenders, I don't believe you'll be able to go up to a larger wheel and tire; your current 4.80-12 tire is roughly 20.63" in diameter. The smallest available 13 inch tire is an ST175/80-13 like the one that comes on the Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range C # AM3S130, which is 24" tall. You typically...
    view full answer...
  • Can 4.80-12 Trailer Tires and Wheels be Replaced by 175/80-13 Tires and Wheels
    The radial tires at size 175/80-13, are going to be 7 inches wide; too wide to be able to fit without incident on your trailer, so you will need to go with a bias ply tire. The wheels that we carry, unless otherwise noted, have a zero offset. This means that the extra width will be split evenly on each side of the tire. However, there will be very little room if you just have 1-3/4 inches of clearance. Make sure you double and triple check the measurements before ordering. As you are aware,...
    view full answer...
  • Harbor Freight Trailer Tire 4.80-12 Upgrade Recommendation with Higher Speed Rating
    The difference between the 4.80-12 tire size you have now and the size 175/80-13 of the # AM3S130 you referenced is 4 inches overall in diameter and in width 2.2 inches. Judging by your pictures it doesn't look like you quite have the clearance for the larger size but since your reason for wanting to upgrade was to have a higher speed rating your best option would be to switch to the # TT48012C which is the size you have now and has a speed rating of 81 mph. This will for sure fit, has...
    view full answer...
    Image 1 for
  • Are There 13 Inch Wheels With a 4 on 4 Bolt Pattern
    We do carry 13 inch wheels that have a 4 on 4 bolt pattern, but I am not aware of trailer tires that are size 155/80R13, so I can't confirm if any will fit this size wheel, as it's the tire that does have to fit the wheel. We have other sizes of trailer tire that fits a 13 inch wheel with a 4 on 4 bolt pattern, however. If you are just looking for the wheel though, you can choose from a number of different options, depending on the style you want. - Galvanized Steel Spoke Trailer Wheel...
    view full answer...
  • Can Larger Tires with Brakes Be Installed On a Harbor Freight Folding Trailer
    I do have an option for you to upgrade to larger wheels/tires in the Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel part # AM3S130 which is similar to the Loadstar ST185/80D13 Bias Trailer Tire with 13" Galvanized Wheel part # AM3S334 you were asking for. However, the Harbor Freight Trailers use very uncommon bearings and we don't have any hubs that will work with them so I can't get you setup with brakes and the larger bolt pattern. There could also be an issue with the...
    view full answer...
    Image 1 for
  • Trailer Tire and Wheel With 4 on 4 Bolt Pattern
    The largest tire and wheel combination you can get with a 4 on 4" bolt pattern is going to have a 13" rim and 175/80-13 tire. This will give you a tire and wheel that is a total of 24" in diameter and 6.6" wide, which will be 7.9" larger in diameter and 2" wider than your current set up. Depending on the capacity you need, your options for this are the Loadstar # AM3S040, which has a 1,100 lb capacity at at 35 psi or the Loadstar # AM3S130 which has a 1,360 lb capacity at 50 psi.
    view full answer...
    Image 1 for
  • Should Wheel Spacers be Used for Tires Rubbing Trailer Frame
    I am unaware of any specific place that has a spacer/extender which will work for your application in regards to the Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel # AM3S130 rubbing your trailer frame. We do not recommend the use of spacers because it can cause otherwise avoidable issues with your tires and hubs; the added stress from an extension/spacer can cause tire wear or internal issues with the hub. While I understand it is not the solution you wanted the best...
    view full answer...
  • Tire / Wheel Recommendation For Pop-Up Camper With 4 On 4 Bolt Pattern
    We do offer a few options for tire/wheel combos that may work for your camper. We have the Loadstar ST175/80D13 Bias Trailer Tire, part # AM3S120 that has a white 8-spoke steel wheel. This tire has a 6 ply rating and a 1,360 maximum load at 50 psi. For a tire wheel with the same characteristics except the wheel has a galvanized finish, you would order part # AM3S130. I have attached product review videos for both of these combos you can check out.
    view full answer...
  • Switching from 5.30-12 to 175/80-13 Trailer Tires
    Yes, you can safely fit a 175/80-13 tire on your boat trailer. I recommend the Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel part # AM3S130 for replacement as the galvanized wheel will do well to resist corrosion and the total load capacity of 2,720 lbs should be plenty for your needs. This option also provides an 81 speed rating. The 5.30-12 tire is 22" diameter x 5.6" wide and the 175/80-13 tire is 24" diameter x 6.6 wide. Therefore, you will only lose 1" diameter...
    view full answer...
  • Best Tire for 1963 Aristocrat Lo-Liner Camper
    We can get this figured out! What you are looking for I believe is the 4 on 4" bolt pattern which is extremely common on the smaller 13" rims. I've included a FAQ article to show how to measure the bolt spacing. It is something that commonly gets confusing I could be wrong here but please double check. With that said your 1963 Aristocrat Lo-Liner Camper weighs in at about 1300 lbs. with out all your gear in there. Add another 500 lbs. of goodies and we get to about 1800 lbs. With...
    view full answer...
  • Is a Trailer Tire's Load Rating Per Tire or Per Axle
    Weight capacity ratings on tires are for that 1 tire. So if you used 2 of # AM3S130 for example the total capacity would be 2,720 pounds total.
    view full answer...
  • Replacement Wheel and Tires for a 1965 Aristocrat Lo-Liner Travel Trailer
    Tire sizes that start with the letter P are for passenger vehicles and shouldn't be used on a trailer as they aren't designed for the vertical loads that trailers will see. Your overall tire diameter is currently 22.7 inches and the width is 6.1 inches. For a setup that would be just slightly smaller than what you currently have and comes with a 4 on 4 inch bolt pattern wheel I would recommend the part # AM31208. The overall diameter of this wheel and tire is 21.3 inches and the section...
    view full answer...
  • 13 Inch Boat Trailer Wheel and Tires With 4-Bolt Pattern
    Sure, you can go from 12 inch to 13 inch wheels and tires on your boat trailer that has 4-bolt hubs. You just want to be sure to maintain 3" of clearance from the top of the tire to your fender and at least 1" of clearance between the inside of the tire and your trailer's frame rail. If you have that you can choose from the following wheels and tires for your boat trailer, depending on the load capacity you need, and they measure 24" in diameter and 6.6" wide. - Load Range B (1,100 lbs...
    view full answer...
  • Factors to Consider When Increasing Wheels on a Trailer from 8 Inches to 13 Inches
    The factors that you will want to consider when increasing your tire size are wheel bolt pattern, tire width, tire clearance and overall trailer height. You will want to keep the same bolt pattern as your current tires. The Kenda Loadstar ST175/80D13 Tire, # AM3S130, that you referenced has the same 4 on 4 bolt pattern as your current tires so that will work. The next thing to check is your tire width, or section width. Increasing the wheel size may increase the section width of the...
    view full answer...
  • Which Trailer Tires Will Replace 650-13 Tires On an Old Boat Trailer
    The 650 indicates the section width of the tire is at or near 6-1/2 inches. The closest modern equivalent is an ST175/80-13 which is about 7 inches wide. This tire size fits 4-1/2 to 5-1/2 inch wheels. Wheel width is measured on the inside where the tire sits not the overall width of the wheel. If you just want tires you can use # AM10210 rated for 1,610 pounds at 65 psi. If you want to also replace the wheels I recommend tire and wheel combo # AM3S130 which comes with a galvanized wheel...
    view full answer...


< Previous



Do you have a question about this Trailer Tires and Wheel?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee Laura H
Updated by:
Laura H
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B
Employee Dustin K
Video Edited:
Dustin K

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<