This winch was made to handle your 20' boat. It's rated at 3,200 lbs and offers 2 cranking speeds so you can get the torque you need to manuever your boat onto the trailer. The zinc plating makes it resistant to corrosion.
100' spool of 7-way trailer cable with six 12-gauge wires and one 10-gauge wire. Features color-coded conductors, abrasion-resistant jacket, flexible stranded core, and meets SAE J-1128 standards for durable, high-capacity trailer wiring.
Round trailer axle beam measures 89" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 74" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).
Pull the front-facing plunger pin on this jack to release the drop leg for 13-3/4" of lift on top of the 15" of screw travel. Durable screw offers increased strength. Sidewind crank (TJD-12000-HD) sold separately.
If you have any gear with a 2" D-shaped hitch pin receiver this handy hitch lock will secure it to the back of your ride and eliminate noisy rattle. Can be keyed alike to match other locks.
Demco's eZ-Latch coupler latch is now available for your gooseneck trailer! It couples automatically, locks automatically, and disengages by simply lifting the handle. This inner tube replaces your existing inner tube for a quick installation.
This surge actuator lets your boat trailer's disc brakes work without wiring or a brake controller, so nothing electrical sits in the water. It also includes a solenoid so you can back up your trailer without engaging the brakes.
You deal with mud, rain, and cold mornings. This binder is made for all of it. Extend it out to reach your chains, then tighten it down or spin it free when you need to move fast. When the job's done, fold the handle away and hit the road.
You work with the biggest equipment and the toughest loads. This chain binder delivers the strength and control you need to get the job done right. It's built for demanding hauls and rough conditions, so you can count on it every day.
You deal with mud, rain, and cold mornings. This binder is made for all of it. Extend it out to reach your chains, then tighten it down or spin it free when you need to move fast. When the job's done, fold the handle away and hit the road.
Ideal for saltwater boat trailers, these disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (25580) and outer (02475) bearings and 9/16" bolts.
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. Manual crank handle and drill bit included for flexible operation.
Be seen with this 3/4" round LED. The red diode with clear lens is perfect for clearance or side marking and fits snug with the included grommet. Plug-and-play, 2-wire bullet connectors. Fully submersible - great for boat trailers! PC rated.
Versatile 3/4" red LED works as a clearance, marker, or third brake light. Sealed, submersible housing is great for boat trailers. Installs with a rubber grommet. 3-wire setup with bullet connectors for easy hookup. PC rated.
6-1/2" x 2-1/4" Waterproof LED displays brake, tail, and turn signals on your trailer. It mounts in a cutout with a grommet (sold separately) and works with AMP-style plugs.
Stay visible and safe with this dual-purpose LED strobe and turn signal. The 36-diode light flashes as a bright amber strobe but automatically switches to a turn signal when activated. Works with 12V and 24V systems.
Be seen with this compact 3/4" round LED light for clearance or side marking. Fits snugly in a recessed mount with the included grommet and works with 12V and 24V systems. Fully sealed and submersible - great for your boat trailer! PC rated.
Be seen with this 3/4" round red LED light for clearance or side marking. Mounted in a UV-resistant bracket for easy installation on flat surfaces. Quick wiring with an 8", stripped, 2-wire pigtail - just connect and go. PC rated.
Stay visible and safe with this dual-purpose LED strobe and turn signal. The 36-diode light flashes as a bright amber strobe but automatically switches to a turn signal when activated. Works with 12V and 24V systems.
Be seen with this compact 3/4" round LED light for clearance or side marking. Fits snugly in a recessed mount with the included grommet and works with 12V and 24V systems. Fully sealed and submersible - great for your boat trailer! PC rated.
2" Diameter round. Waterproof, LED trailer light functions as both a clearance and side marker light. LumenX optics creates a solid panel of light. Recessed mount with included grommet. Accepts industry-standard sealed plug. PC rated.