2017 Coachmen Clipper LS Camper Roof Rack by Rhino Rack

Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 71" Long - Qty 3
part number: RRVA180S-3

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Features:

• Sleek, low-profile crossbars let you build an aftermarket roof rack for your vehicle
  • Rhino-Rack legs and custom fit kits create a complete roof rack
• Slim, elliptical crossbar shape helps to create an extremely aerodynamic system
• Full-length bars extend past roof rack legs to maximize space for carriers and accessories
• Top channels let you add channel-mounted carriers and accessories
  • Clamp-on accessories mount conveniently around bars
• Rubberized Vortex strips in top channels dramatically reduce drag and wind noise
  • Keep dirt and grime out of crossbars
  • Provide cushioning and slip resistance for your cargo
• Bottom channels allow easy installation to Rhino-Rack roof rack legs
  • Rulers in channels help to center crossbars on your roof
• Lightweight, structural-grade anodized aluminum bars are rustproof
  • Internal H-shaped extrusion provides exceptional bar strength
• Plastic lock cores with universal keys deter theft of channel-mounted accessories
  • Can be upgraded to all-metal locks (RRVA-LEC2 - sold separately) for added security
• Matte silver finish

Specs:

• Quantity: 3 crossbars
• Weight capacity: 165 lbs
  • Always observe your vehicle's maximum roof load capacity
• Dimensions: 71" long x 3-1/8" wide x 1-3/16" tall
• T-slot dimensions: 13/16" wide x 1/4" tall
• T-slot top opening: 3/8"
• Underbar slot: 11-3/4"
• Limited lifetime warranty

These low-profile, aerodynamic Vortex Aero crossbars let you build a stylish aftermarket roof rack from scratch. The crossbars require 6 Rhino-Rack legs (manufactured in 2014 or later) and a custom fit kit to mount it to your roof. Each bar extends past the roof rack legs to maximize the space for mounting carriers and accessories. Rubberized Vortex strips in each crossbar's top channel disrupt airflow for a quiet ride, and the bars are constructed of aluminum so they won't rust. The crossbars also include Secure Core endcaps with plastic locks to help deter theft of channel-mounted accessories.

Aerodynamic Design

The rubberized Vortex strips in the top channel of each crossbar disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex Aero crossbars cut through the air with minimal drag - even at highway speeds.

Strong, Durable Construction

The Vortex Aero crossbars are made of structural-grade anodized aluminum with H-shaped internal extrusions. These extrusions strengthen the bars without adding a significant amount of weight. And the aluminum bars won't rust so you can leave them on your roof year-round.

No-Hassle Installation

Each crossbar has a channel in the bottom for mounting to Rhino-Rack roof rack legs (sold separately). Each end of the channel includes a rubber ruler to help you center the bar on your roof. Simply use the numbers and hash marks on the rulers to ensure the legs are spaced properly in the channel.

Channel-Mounted and Clamp-On Accessories

Each Vortex Aero crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersport carriers, and ski racks. The Vortex strips in the top channels come in 3 pieces, so they're easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the crossbar channels capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.

You can also attach most clamp-on accessories to the bars, and the Vortex strips provide shock-absorbing, no-slip cushions for any accessories that rest on them.

Built-In Security

Each crossbar includes 2 Secure Core locking endcaps made of durable polypropylene. These endcaps lock with a universal tubular key. The polypropylene locks secure the endcaps to the crossbars and help to secure channel-mounted accessories to the crossbars. For maximum security, you can upgrade to endcaps with all-metal lock cores (RRVA-LEC2 - sold separately).

VA180S Rhino Rack Vortex Aero Aluminum Cross Bars - Silver - 71" Long - Qty 3

Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4
part number: RRRLT600

Quick Mount legs let you mount 2 Vortex Aero crossbars to RTC- or RT-style roof rack tracks. A trigger system allows tool-free installation of the legs into the tracks, and the locking covers secure the system to your roof.

Features:

• 4 Legs let you mount 2 Rhino-Rack Vortex Aero crossbars to Rhino-Rack RTC- or RT-style roof rack tracks
• Quick-release trigger system allows easy, tool-free installation
  • Squeeze internal triggers to release legs from bases
  • Slide triggers apart to secure legs to bases
  • Bases remain mounted to tracks
• Locks in covers let you secure the system to your roof
• Pivoting bases offer 33 degrees of adjustment to help level crossbars on a contoured or curved roof
• Precision-molded inserts cover bases when the legs are removed
• Durable, glass-reinforced nylon construction

Specs:

• Application: Rhino-Rack RTC- and RT-style roof-rack tracks
• Quantity: 4 legs
• Leg height: 3"
• Weight capacity (per pair): 110 lbs
  • Always observe your vehicle's maximum roof load capacity
• Limited lifetime warranty

The bases of these Rhino Rack legs easily mount into your Rhino-Rack RTC- or RT-style roof rack tracks with included hardware. Just slide the nuts into the tracks, line up the mounting plates, and bolt the bases down. After this initial setup, you can leave the bases in the tracks.

Molded inserts help keep out dirt and provide a finished look when there are no legs and crossbars installed. To install a leg, simply remove the insert.

Once you've set up the bases, installing and removing your roof rack is easy. The Quick Mount legs have an integrated trigger system that creates an easy, tool-free installation.

To install a leg in a base, pinch and slide the internal triggers together.

Lower the leg onto the base and slide the internal triggers apart to secure the leg in the base.

Once the leg is installed in the base, replace the cover and lock it to help secure the system to your roof.

RLT600 Rhino Rack Quick Release Legs for Vortex Aero Cross Bars - Qty 4

Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 2
part number: RRRLT600H

Quick Mount legs let you mount 1 Vortex Aero crossbar to RTC- or RT-style roof rack tracks. A trigger system allows tool-free installation of the legs into the tracks, and the locking covers secure the system to your roof.

Features:

• 2 Legs let you mount 1 Rhino-Rack Vortex Aero crossbar to Rhino-Rack RTC- or RT-style roof rack tracks
• Quick-release trigger system allows easy, tool-free installation
  • Squeeze internal triggers to release legs from bases
  • Slide triggers apart to secure legs to bases
  • Bases remain mounted to tracks
• Locks in covers let you secure the system to your roof
• Pivoting bases offer 33 degrees of adjustment to help level crossbars on a contoured or curved roof
• Precision-molded inserts cover bases when the legs are removed
• Durable, glass-reinforced nylon construction

Specs:

• Application: Rhino-Rack RTC- and RT-style roof-rack tracks
• Quantity: 2 legs
• Leg height: 3"
• Weight capacity (per pair): 110 lbs
  • Always observe your vehicle's maximum roof load capacity
• Limited lifetime warranty

The bases of these Rhino Rack legs easily mount into your Rhino-Rack RTC- or RT-style roof rack tracks with included hardware. Just slide the nuts into the tracks, line up the mounting plates, and bolt the bases down. After this initial setup, you can leave the bases in the tracks.

Molded inserts help keep out dirt and provide a finished look when there are no legs and crossbars installed. To install a leg, simply remove the insert.

Once you've set up the bases, installing and removing your roof rack is easy. The Quick Mount legs have an integrated trigger system that creates an easy, tool-free installation.

To install a leg in a base, pinch and slide the internal triggers together.

Lower the leg onto the base and slide the internal triggers apart to secure the leg in the base.

Once the leg is installed in the base, replace the cover and lock it to help secure the system to your roof.

RLT600H Rhino Rack Quick Release Legs for Vortex Aero Cross Bars - 1 Pair

Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 92-5/16" Long - Qty 2
part number: RRRTS518

These tracks mount directly to your naked-roof vehicle to create strong, low-profile attachment points for Rhino-Rack roof rack legs. Each track has a built-in C-channel for mounting legs, and the kit includes endcaps and installation hardware.

Features:

• Create strong, low-profile attachment points for Rhino-Rack RLTP, RLTF, RLT500, or RLT600 track-mounted legs
• Allow you to easily move legs and crossbars to a new position to accommodate different-size loads
• Mount directly to your vehicle with a naked roof - also work for camper shells and hard tonneaus
  • Attach with included stainless steel pop rivets - rivet gun required
• Constructed of extruded aluminum with an anti-corrosion coating
• Include 4 endcaps that provide a finished look for the tracks

Specs:

• Quantity: 2 tracks
• Track dimensions: 92-5/16" long x 1-1/2" wide x 1/2" tall
• 5-Year limited warranty

RTS518 Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 92-5/16" Long - Qty 2

Customer Reviews

Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 71" Long - Qty 3 - RRVA180S-3

Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 - RRRLT600

Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 2 - RRRLT600H

Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 92-5/16" Long - Qty 2 - RRRTS518

Average Customer Rating:  4.7 out of 5 stars   (3452 Customer Reviews)

Order: RelevanceNewestRating - High to LowRating - Low to High Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included. Quick Mount legs let you mount 2 Vortex Aero crossbars to RTC- or RT-style roof rack tracks. A trigger system allows tool-free installation of the legs into the tracks, and the locking covers secure the system to your roof. Quick Mount legs let you mount 1 Vortex Aero crossbar to RTC- or RT-style roof rack tracks. A trigger system allows tool-free installation of the legs into the tracks, and the locking covers secure the system to your roof. These tracks mount directly to your naked-roof vehicle to create strong, low-profile attachment points for Rhino-Rack roof rack legs. Each track has a built-in C-channel for mounting legs, and the kit includes endcaps and installation hardware.

by: Adam04/15/2023

great product. sturdy easy to install and held my thule cargo box (also an etrailer purchase), really well! Fit perfest in my 2002 Excursion roof rack factory rails and easily adjusted. One note for excursion owners is to mount the front leg of the rack more directly over the rear door vs moving it up towards the front. I was tempted to move it as far forward as I could so I could stand in the rear door opening to access the inside/contents of the box and the weight of the box and contents actually bowed the roof steel in and out while driving, causing a popping noise, once i moved it back a little it was fine. Also making note that I have one of the biggest boxes you can buy so weight was at a max for the roof/roof rack for me YMMV depending on what you have on top of the crossbars. overall good solid product and the cost savings for the Rhino rack vs other brands is a BIG plus for me.1557569

by: Jeff05/27/2023

Works awesome and was the best solution for carrying bicycles while towing travel trailer1588693

Click to Enlarge

Click to Enlarge

by: Michael from Montana02/23/2024

Wow! It's a real well made and engineered product and was delivered fast. I got it so I could remove it due to garage door clearance... It is heavy duty enough to carry our boat and 2 kayaks. The key lock, pivot system and removal system were well thought out and so easy.1737280

Click to Enlarge

Click to Enlarge

by: Stephen 08/14/2022

Hyundai

These quick release feet are a great addition to my 2022 Hyundai Santa Cruz. I will say that I had to modify the T-nuts by cutting off about 1/4" off each of then. Pretty simple modification to get the nuts to fit the oem track. Highly recommend these so much easier than the oem thule feet!1357713

by: Don W08/22/2022

Purchased the Rhino Quick Mount Legs and Vortex-Aero bars, to mount on our Retrax XR Pro Tonneau cover. As always buying from trailer is easy, Terri N make the experience much better, from order to delivery. Terri ensured compatibility with existing hardware, and that everything needed is included.
The Rhino system is an easy install, the fit of the T-slot plate style nuts was tight, eliminating the damage that can occur with loose fitting slot inserts. Assembly can be completed on or off vehicle, as long as all accessories are fitted first. If done off vehicle, accurate measurements will be needed for the base fitment.
We paired the Rhino system with 1up USA bike racks, and a Yakima box.1369400

Click to Enlarge

by: Dennis Marriott06/29/2021

I love the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars. At first they were a pain to crossbar on, but they I used my thumbs correctly on the lock, and haven't had an issue since the first alignment. They really served their purpose and lifted the old Sears Sport 20-SV cargo top carrier off of the roof for easier mounting and for now hold the kayaks. I do need longer crossbars, but that's a future problem that etrailer.com will be glad to provide a solution to.1079043

Click to Enlarge

by: JP09/11/2022

These are excellent! Check out my YouTube channel, Road and Reel, to see how I used the to carry 4 bikes above my Retrax Tonneau cover.1402239

Click to Enlarge

Click to Enlarge

by: Dave S09/19/2017

2014 Ford Transit Connect

I bought these racks for my Ford Transit and I couldn't be happier with the racks or the service from trailer. The rhino racks added a nice touch to an awkward looking van with its great looks and perfect functionality. Reading reviews about other racks making howling noises while driving made me a little hesitant , but am pleased to say, no noise whatsoever. I've added a basket to the racks and everything has worked perfectly. We do a lot of traveling,(2 adults,4 kids, 3 dogs) and the racks have provided exactly what we needed. Thanks etrailer for the best price and great service433957

Click to Enlarge

by: Mark L.07/21/2022

2022 Ford Maverick with a Rhino Rack on a retrax xr tonneau...love em both. THANKS etrailer.1334801

Click to Enlarge

Click to Enlarge

by: Anthony08/01/2023

2018 BMW M6

I like the Rhino Rack RTV track because is allows Vortex Aero cross bars to be easily moved and removed. However the appropriately sized rectangular track nuts (M6 24x21x5 part No. N057) used to mount items to the rack are no longer available or manufactured. Consequently RTV track cannot be easily used to secure additional items. Rhino Rack is unable to offer a solution other than returning the wrong sized track nuts so I will manufacture my own attachment nuts. After drilling 18 holes in the roof of my new car and installing the RTV track and cross bars, the lack of compatible nuts was a big disappointment. The product should not be sold if components are not available.1638247

by: Louis08/13/2021

Fairly easy to install quality materials, no wind noise on the highway .I had these on for a week or so. They are pricey but think they wiil work fine.1122442

Click to Enlarge

by: Andrew01/04/2024

I think these look better than the OEM rack that I ended up installing...however, using them would have required drilling my roof and putting rivets in. I went to 3 shops that refused to do so because they didn't want to be responsible for any leaks.1707428

by: Jim06/20/2023

Really has come in handy as I installed this over my truck bed on top of a retractable bed cover that came with T -tracks. I can load the truck bed with smaller items and use the roof racks to hold a Thule box or just strap on heavy and larger items. Great product.1606428

by: Robert B03/14/2020

Toyota Tundra

I purchased a used gray topper for my Tundra, repainted it to match my truck, and purchased from you the mounts and rails to put on top of it. The entire project was GREAT, and the and rails have just topped it off (see what I did there?) with a great look and very functional utility to add some long storage capability to a very short-bed truck. Thank you so much, it was expensive, but the quality is fantastic and the look is very sharp!
766091

Click to Enlarge

by: Jeff S.08/03/2017

2004 Chevrolet TrailBlazer

These assembled easily and are much stronger than the factory system on my 2004 Chevy Trailblazer. I had a little bit of a problem trying to seat the pins in the saddles but other than that these are very secure.

The instructions tell you to slide the large hex nuts into your roof rail tracks and then assemble the rack leg base to the nuts. This is fairly difficult to do as the bolts were not long enough to reach the nuts resting in the tracks and you can't get your fingers in there to lift them. It was much easier to assemble the complete track leg bases with the Hex nuts installed loose then slide them onto the tracks and into position.

If your tracks are elevated off your roof at all you will find that these bases make any bars you add much higher than your OEM roof rack, the bars are probably 3 inches higher than my OEM bars although this is not an issue for me it may be something you may want to consider.

I had a hard time finding mounts for the original side rails for my trailblazer and had to pay more for the Rhino Racks but the quality is there.

The Vortex Crossbars slide right on to these with no issues.

One tip; have a step ladder on each side of the vehicle because you will be going back and forth to each side as you install these.414369

by: Bruce 10/04/2023

Strong, looks great, and super easy to remove & re-install cross rails.1676775

by: Timothy08/29/2018

I already purchased a 4 pack of legs and needed a 2 pack to have 3 Rhino crossbars. Wish I was able to select the same key number but not a deal breaker by any means. Love the product 559327

Click to Enlarge

Click to Enlarge

by: Quinten02/08/2023

I'd give these a 3.5. I think they work just fine but in comparing to my Yakima towers these are not as easy and convenient. The pinch style legs can be hard to use if the bars are not lined up right or hard to manage in cold wet conditions. I didn't like that the locking mechanism and face plate come out completely. Just too many pieces and possibility of something getting lost. Overall, I think they are strong and although not as convenient as Yakima they are far better than some other alternatives.1515083

by: Danny04/23/2021

Thanks for all your help! Project turned out awesome! (Pics attached).. Easier to mount directly to bed sides.1020396

Click to Enlarge

Click to Enlarge

by: The W07/14/2023

All good. Needed hardware to track mount a third Vortex bar. Etrailer had the best price.1623445

by: James Alex Artis09/27/2017

2016 ford Transit Connect

The rack is functional and looks good on my van.436880

Click to Enlarge

Click to Enlarge

by: Scott 02/04/2024

2020 Jeep Wrangler Unlimited

good price and prompt delivery 1720209

by: David 12/23/2021

Rhino Rack makes great quality racks and etrailer has consistently good prices in them.1229461

by: Enrique 09/16/2022

2007 Ford F-250 Super Duty

Awesome customer service! Professional people. Ill be honest, sent incomplete product first time. Made a phone call, took care of me. Carol C, hands down only reason I will continue to purchase from etrailer. Been a customer for years, work in customer service myself, so feel real good when someone can fix and make happy there customers!1409987

by: Marco 03/11/2023

I needed a crossbar over my Retrax tonneau and the Rhino-Rack Quick Mount is just what I needed. The etrailer videos for this product showed me exactly how to install it and it was very smooth and easy. Thanks!1534339

25

3254

Show More Reviews

Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?

• Recommended Roof Rack for 2018 Mercedes-Benz Sprinter Factory Tracks
  
• We have a few systems that will fit the factory tracks on your 2018 Mercedes-Benz Sprinter. If you want the 2 Crossbar system, I recommend the following: Rhino-Rack Vortex Aero Crossbars - 71" Long - Qty 2 # RRVA180B-2 Quick Mount Legs - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 Quick Mount Nuts - Factory Tracks - Qty 8 # RRQMFK11-2 Metal lock cores # RRVA-LEC4 If you want the 3 Crossbar system, I recommend the following: Rhino-Rack Vortex Aero Crossbars - Aluminum -
  view full answer...


• Roof Track Rack For a 2016 Mercedes Benz Sprinter 144 inch High Roof Van
  
• Your vehicle is able to equip any of the roof kits available for the standard roof, but without the track equipped. If you'd like the Vortex AeroBar kit, you'll want: 1 Rhino-Rack Vortex Aero Bar 3 Pack, Silver, part # RRVA180S-3 or Black, part # RRVA180B-3 3 Rhino Rack RLTF Legs for OEM/Factory Mounting Points, part # RLTFMS 1 Rhino Rack RLTP Leg Adapters for OEM/Track Mount, part # RRVA-FK1-3 If you'd rather get the Heavy Duty HD Bars, you'll instead get: 1 Rhino-Rack
  view full answer...


• Will Rhino-Rack Crossbars Perfectly Fit the 2005 Ford Excursion XLT Factory Rails?
  
• The Rhino-Rack Quick Mount Legs - RTC and RT Roof Rack Tracks # RRRLT600 will mate with the stock side rails. Then I recommend the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long # RRVA137B-2 to complete your roof rack system. This combination will give you a nice clean look and is rated for up to 220 lbs.
  view full answer...


• How Do I Mount The Rhino-Rack Quick Mount Legs On My Lance 920 Cab-over Camper
  
• If the raised rails on your camper have a track, you will need the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4, part # RRRLT600. These Rhino-Rack Legs will mount to the tracks in your rails on the roof of your Lance 920 Camper. If your camper has raised rails without tracks, you will use the Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Raised Factory Side Rails - Qty 4, part # RRSX008. Without knowing the width of your camper,
  view full answer...


• Base Rack for my Rhino Rack Batwing that Will Fit my Yakima Snugtop Tracks
  
• The Rhino-Rack 65" Roof Rack for Thule and Yakima Tracks part # Y01-140B-NT is a great option. I always look to Rhino Rack for a very well built but cost effective option! These will be the best priced option available without sacrificing. This will give you a nice solid base to attach your awning like the Rhino-Rack Batwing Compact Awning part # RR33400.
  view full answer...


• Rhino Rack Roof Rack that Fits Tracks of RetraxPRO XR Tonneau Cover
  
• Rhino Rack actually has a kit designed specifically for fitting the tracks of a RetraxPro XR ladder rack with the part number # RRVA180B-RRRLT600. This kit includes the feet you mentioned # RRRLT600 which fits the tonneau.
  view full answer...


• Rhino Rack Roof Rack Recommendation For 2002 Ford Excursion
  
• When you are fitting a roof rack for your vehicle please remember that you can choose longer crossbars provided that they do not extend beyond the side-rview mirrors of your vehicle. Your 2002 Ford Excursion's roof rack will consist of the following; Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, part # RRVA150B-2 and the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4, part # RRRLT600. This roof rack has a weight
  view full answer...


• Could Rhino Rack Roof Rack Feet Fit in Thule Roof Rack Tracks
  
• Rhino Rack feet like the part # RRRLT600 do fit in Thule tracks. Thankfully the track dimensions between Rhino Rack and Thule are the same.
  view full answer...


• Can I use Thule Podium Bases with My Rhino Rack Aero Crossbars on my 2019 Mazda CX-5
  
• I have a complete kit as a solution with Thule but unfortunately the Rhino Rack Aero Crossbars like part # RRVA106B-2 will not work with the Thule Rapid Podium Feet. There is enough of a difference that there is no way to guarantee the weight ratings of two different manufacturer's parts. I do not have a Rhino Rack Fit Kit to match your vehicle either. Instead the entire roof rack is the way to go. This includes the three following parts. Thule WingBar Evo 47" Crossbars part # TH711220 Rapid
  view full answer...


• Rhino Rack Track Mount Roof Rack for a 2-Door 2018 Jeep JL Wrangler
  
• We do have a track mount Rhino-Rack roof rack that is compatible with your 2-Door 2018 Jeep JL Wrangler with the hard top. For the system that does fit your Jeep you need the 31-1/4" long RTC-Style Tracks # RRRTC8JWMY11, the Quick Mount Legs # RRRLT600, and the 59" Vortex Aero Crossbars # RRVA150B-2 (this part number is the Black version). The tracks are trimmable but since Rhino-Rack has test fit this I doubt you will need to trim it.
  view full answer...


• Roof Rack for 2008 Saturn Aura That Doesn't Require Drilling
  
• It might be possible to bolt the feet kit part # RRRLT600 directly to a vehicle roof but since that's not how these were intended to be used it would not be my best recommendation. Your best option for a roof rack for your 2008 Saturn Aura would be the Inno part numbers # INB127, # INSUT, and # INK219 which attaches using door clamps instead. This gives you a very secure roof rack that does not modify the vehicle in any way. Drilling into the roof would pretty easily introduce leaks too.
  view full answer...


• Can I Use 65" Long Crossbars on my Rhino Rack Backbone System on 2013 Jeep JKU Hardtop
  
• I recommend just swapping out to some longer bars like the 65" long # RRVA165B-2, which will work with the # RRRLT600 legs and the Backbone system # RRRJKB1. You could reasonably use any Rhino Rack vortex aero crossbars on this setup as long as they were long enough. There is also a 71" long bar with the # RRVA180B-2.
  view full answer...


• Rhino-Rack Roof Rack for a 2013 Jeep Grand Cherokee with Factory Side Rails with Channel in Top
  
• It sounds like your 2013 Jeep Grand Cherokee has the E-group package with flush mounted side rails that have a channel in the tops. These are not tracks though. Tracks on a vehicle roof are something completely different. I do have an excellent solution for you but foot pack # RRRLT600 is not a confirmed fit for the side rails. What I recommend is the Rhino-Rack RVP roof rack # RRRVP27. This is a complete rack with the feet and the bars and ready to install on the vehicle. I linked
  view full answer...


• Crossbars to Fit on Rhino-Rack Quick Mount Legs for Track System
  
• The Rhino-Rack Quick Mount Legs # RRRLT600 are designed to work with the Vortex crossbars and there aren't any adapters that will allow them to fit together. So this means that if you have the track system and you're wanting a roof rack fit then you'll need the Quick Mount Legs # RRRLT600 as well as Vortex crossbars like the 54" # RRVA137B-2.
  view full answer...


• Adding Rhino-Rack Legs and Crossbars to a Track System on a 2021 GMC Sierra AT4
  
• It sounds like you already have tracks on your 2021 GMC Sierra AT4 and are looking to add legs and crossbars to complete your roof rack. The Rhino-Rack RLT600 Quick Mount Legs, part # RRRLT600, are designed for Vortex aero bars, which is what I will recommend since aero bars cut back on wind noise and drag and tend to have better versatility with regards to accessories. If you end up wanting the Heavy-Duty square bars, let me know and I will find the proper feet and crossbars for
  view full answer...


• How To Use Rhino-Rack Heavy Duty Crossbars On a Pace Edwards Tonneau Cover with Thule/Yakima Tracks
  
• Yes, you can use a Rhino-Rack Roof Rack with the Thule/Yakima tracks on the Pace Edwards Metal Ultragroove Retractable Tonneau Cover. I have listed the parts you need below: Rhino-Rack Quick Mount Legs part # RRRLT600 Adapter Kit for Rhino-Rack RTL600 Legs part # RRT-FK3 (Yakima) part # RRT-FK1 (Thule) Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1800B-2 Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars part # RRQMHD05 (2).
  view full answer...


• Height of Rhino Rack Roof Rack for 2005 Ford Excursion
  
• The part # RRRLT600 you mentioned are just the legs for a Rhino Rack system that mounts to factory installed tracks that run front to back and are a fit for certain makes and models of vehicles such as a 2005 Ford Excursion. The # RRRLT600 legs are 3" high and the accompanying bars which make up the roof rack on an '05 Excursion, the Rhino-Rack Vortex Aero Crossbars # RRVA137B-2 are 1-3/16" tall so the total height will be 4-3/16". This is a great roof rack system because the low-profile
  view full answer...


• Will Rhino-Rack Quick Mount Legs for Rhino Rack Tracks fit Yakima Roof Channels
  
• Yes, the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 that you referenced do fit the Yakima roof rack tracks that you also referenced.
  view full answer...


• Longest & Strongest Tracks For Leer Topper Camper Shell
  
• A 6.7 foot bed is about 80 inches long. If you wanted to get the longest tracks you can get for your Leer Topper I would suggest getting these # RTC18 which are 71 inches long. I like enabling my vehicle as much as possible. With the long tracks you can utilize your whole roof to do whatever you want it to. These tracks use the Rhino-Rack Quick Mount Legs # RRRLT600 and then you can use any size crossbar you want. I like getting the most length possible so I would go with the 65 inch bars
  view full answer...


• What Parts do I Need to Mount a Rhino-Rack Pioneer Platform to a Camper with Yakima Tracks?
  
• If you are trying to attach the Rhino-Rack Pioneer Platform Rack RR42103BF to your truck topper with Yakima tracks, you will need the following parts: - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 - Adapter Kit for Rhino-Rack RTL600 Legs - Yakima Tracks - Qty 12 # RRT-FK3 The weight capacity of this system has a maximum of 110 pounds.
  view full answer...


• Will Rhino Rack Roof Rack Feet Fit Thule Roof Tracks
  
• The good news is that the roof rack manufacturers all decided to use the same channel dimensions so the roof rack accessories for roof channels basically all are interchangeable between (most) brands. Thule and Rhino Rack do work together just fine. For the feet you would need the part # RRRLT600 and then for 65 inch crossbars you would want the part # RRVA165B-2.
  view full answer...


• Roof Rack and Kayak Carrier for 2011 Toyota Tacoma with A.R.E. Overland Cap
  
• The A.R.E. Overland cap on your 2011 Toyota Tacoma is equipped with Yakima rails/tracks and the most cost efficient roof rack setup we have this is compatible is the Rhino-Rack Aero Bar System that consists of # RRRLT600 for the Quick Mount Legs and # RRVA165B-2 for 65 inch Vortex Crossbars. This will give you a really durable, sleek, and quiet roof rack on your truck cap. To secure the 2 kayaks to the crossbars I recommend two of the etrailer.com J-Style Kayak Carriers # E98878. These
  view full answer...


• Third Bar for an Existing Rhino Rack Track Roof Rack
  
• You'll have to purchase a half kit individually at that size, but we do carry the parts. To make this kit, you'll need: Rhino-Rack Quick Mount Legs, part # RRRLT600H Rhino-Rack Vortex Aero Crossbar, 54 inches, part # RRVA137B
  view full answer...


• Will Rhino Rack Mounting Legs Work w/ Thule Aero Bars?
  
• No, the Rhino-Rack Quick Mount Legs item # RRRLT600H don't work with Thule crossbars or anything else that isn't Rhino-Rack. If you would like me to find a set of mounting legs that will work with your Thule Aero bars I would just need to know the year, make, and model of your vehicle and whether or not it is equipped with roof rails. Feel free to email me directly or comment below. Hope to hear from you!
  view full answer...


• Are There Replacement Mounting Points For Rhino-Rack Quick Mount Legs RRRLT600H
  
• There are not replacement mounting points for the RRLT600H legs, so if you are missing them or they were otherwise damaged, you would need to replace the entire set of legs: - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600H
  view full answer...


• Can I Purchase the Rhino-Rack Crossbar System Without the Tracks?
  
• Yes, you can purchase just the Rhino-Rack legs and the crossbars without the tracks. For the legs, you need 2 sets of the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600H. For the black 54" Rhino-Rack crossbars, you need the Rhino-Rack Vortex Aero Crossbars # RRVA137B-2. The Rhino-Rack legs will fit onto Thule tracks on your Leer camper shell.
  view full answer...


• Will the Rhino Rack Quick Mount Legs Work With Thule Top Tracks
  
• Yes, the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600H will work with the Thule tracks you have coming on your LEER camper shell. Since you mentioned you wanted to use the 65" Rhino Rack crossbars, I'd recommend using the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT which comes with the 65" bars as well as all the feet you'll need as well.
  view full answer...


• Can Roof Tracks Be Installed Onto Fiberglass Camper Shell?
  
• Yes, most camper shells are fiberglass and you can certainly install roof tracks such as the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 92-5/16" # RRRTS518 that you were looking at, or some shorter 74" tracks # RRRTV188. You could then install crossbars such as Rhino-Rack Vortex Aero Bars 79" # RRVA200B-2 along with Quick Mount Legs # RRRLT600. I attached a demonstration video for you.
  view full answer...


• Can Rhino-Rack RT Roof Rack Tracks Be Cut And Bent To Fit Curved Roof?
  
• Yes, roof rack tracks such as the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 92-5/16" # RRRTS518 have removable endcaps. You can simply cut the tracks to size then install the endcaps. These tracks are made of aluminum and can be bent to conform to a curved roof. I recommend starting in the middle and working your way to the edges to ease installation.
  view full answer...