Roof Rack Includes:
Part Numbers: RRVA106B-2,RRSX100
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
Features:
Specs:
These low-profile, aerodynamic Vortex Aero crossbars let you build a stylish aftermarket roof rack from scratch. The crossbars require 4 Rhino-Rack legs (manufactured in 2014 or later) and a custom fit kit to mount it to your roof. Each bar extends past the roof rack legs to maximize the space for mounting carriers and accessories. Rubberized Vortex strips in each crossbar's top channel disrupt airflow for a quiet ride, and the bars are constructed of aluminum so they won't rust. The crossbars also include Secure Core endcaps with plastic locks to help deter theft of channel-mounted accessories.
The rubberized Vortex strips in the top channel of each crossbar disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex Aero crossbars cut through the air with minimal drag - even at highway speeds.
The Vortex Aero crossbars are made of structural-grade anodized aluminum with H-shaped internal extrusions. These extrusions strengthen the bars without adding a significant amount of weight. And the aluminum bars won't rust so you can leave them on your roof year-round.
Each crossbar has a channel in the bottom for mounting to Rhino-Rack roof rack legs (sold separately). Each end of the channel includes a rubber ruler to help you center the bar on your roof. Simply use the numbers and hash marks on the rulers to ensure the legs are spaced properly in the channel.
Each Vortex Aero crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersport carriers, and ski racks. The Vortex strips in the top channels come in 3 pieces, so they're easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the crossbar channel capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.
You can also attach most clamp-on accessories to the bars, and the Vortex strips provide a shock-absorbing, no-slip cushion for any accessories that rest on them.
Each crossbar includes 2 Secure Core locking endcaps made of durable polypropylene. These endcaps lock with a universal tubular key. The polypropylene locks secure the endcaps to the crossbars and help to secure channel-mounted accessories to the crossbars. For maximum security, you can upgrade to endcaps with all-metal lock cores (RRVA-LEC4 - sold separately).
Durable nylon legs let you mount Vortex Aero crossbars to your vehicle's factory elevated side rails. Custom-fit leg clamps tighten with included tool for easy installation on your rails. Pair with 2 crossbars to create a complete roof rack.
Features:
Specs:
Average Customer Rating: 4.7 out of 5 stars (3610 Customer Reviews)
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included. Durable nylon legs let you mount Vortex Aero crossbars to your vehicle's factory elevated side rails. Custom-fit leg clamps tighten with included tool for easy installation on your rails. Pair with 2 crossbars to create a complete roof rack.Package, both items appeared used, but in good condition. The legs were not in the factory box, but just a eTrailer box. The instructions were hard to follow, even with a little help from YouTube. Just about to test drive to check the noise level. Time will tell, there is soft rubber on the legs and it may be wise to remove these when not in use, especially during Florida summers.
Rhino rack products are superior and I prefer them over Yakima or Thule.
However, I would like eTrailer to know, and to warn other customers that over the years the items I order from them always come with cosmetic damage or missing parts due to insufficient packaging.
In this case, my Vortex bars were shipped in the retail box which had opened in transit so two of the end caps escaped and are who knows where. Under a conveyor belt line in some UPS building or in one of their trucks somewhere.
This is not an issue as these end caps I intended to dispose of replacing them with the locking end caps I ordered with my bars and towers.
etrailer, I do not need resolution for this issue but your track record with packaging and shipping is sub par. Please step up your game so your customers receive complete orders.
Jenny N.
7/7/2023
I know that you are not looking for replacements. I hope that you will have a good experience with the rack and I will share your experience with our shipping department.
I haven’t installed rack yet and everything appears to be in order.
* I wasn’t anticipating that Rhino -Rack Sports Ladder Peg (s602) be made of plastic.
Does it have the strength, durability to perform well and not get brittle in colder temps?
Jenny N.
12/1/2022
I wanted to let you know that the racks to do have longevity in all type of weather and are made to be taken off and on the vehicle.
James
12/2/2023
I purchased the rack and pegs a year ago. I was just recently reflecting on how well the racks have worked out for me with my work. I’m glad I made the investment in them, it was worth it.
Awesome parts. Strong grip and kudos on the rubber flares for the seal.
Great option for our 2016 Prius C. Coupled with our roof cargo box also from etrailer, we've already done some epic road tripping with 0 issues.
Using Rhino-Rack Vortex Aero Crossbars, Using Rhino Kayak holders. Also use a Rhino bicycle rear receiver mount. Love Rhino products.....strong, well engineered, low noise, and every part is quality... mounts, straps, etc. Photo is departure picture from last years trip to Big Bend, Texas. We probably put a couple thousand miles on these pieces of Rhino equipment on all types of roads at both Big Bend Park and Big Bend State Park... You really cannot go wrong buying Rhino products. Everything they make is well designed and will not disappoint.
Glynn D.
4/20/2021
Rhino products are just great products They work today like the day I bought them and they show very little agewear. You really cant go wrong with Rhino products.
I bought these for my 2013 Rav4 primarily to transport wood from home depot. Getting the bars safely installed and latched onto the cars longitudinal bars was pretty simple. The problem was the whistling. The cross-bars having a tee slot will whistle if you don't properly cut and install the 2 types of rubber/plastic tee-slot blocks provided. There is a slot block for the top, and for the bottom. The top one is easy to install since it is just one piece, but the bottom one requires 4 piece of this tee-slot block (2 outer pieces and 2 inner pieces. It took me a while to get the bottom blocks installed, quite a bit of measure, test cut, check, remeasure, cut, insert, recut yada yada.
Once I thought I had everything right, I could still hear whistling on the freeway and had to re-cut some better fitting bottom slot blocks. It turns out the more you tighten the legs, the more of the tee slot is exposed, and you need to have more of the tee-slot block. Having looked at some of the equpipment you can attach to the top of these tee-slot racks, I don't see why the bottom tee slot is even necessary.
Anyway, once installed (properly), these bars work great. I can transport wood Lol
This rating is not for the product and solely on the practices of ETrailer. ETrailer erred and did not ship this product when they confirmed and when called to check the status charged me an additional $xx plus for overnight shipping in order that I have the product in time for our trip. 2 of the 3 parts of this order did arrive on time and in good shape, but the fact that Etrailer charged me additional for their shipping error does not sit well with me at all and I would never recommend the company to friends.
Katrina D.
12/14/2023
I am sorry to hear that your items did not arrive on the day that you had paid for. I see that our customer service department is currently working on getting some compensation figured out for you.
No wind noise whatsoever! One gripe: one end cap won’t lock (blue plastic key lock). Had to tape it to secure it.
Its been one year since I installed the Rhino Rack crossbars and I have absolutely no issues. The main use is to carry my Kayaks on my 2013 Subaru Impreza utilizing Yakima JayLow kayak carriers. The only caveat is to be sure to properly cut and install the plastic channel inserts (underside) or you will experience an annoying whistling sound. If you're looking for high quality crossbars, I highly recommend these.
Just what I was looking for for my 2021 MB Metris Cargo Van with Raised Rails, for hauling a 14-foot SUP. I wanted as low profile as possible and the Rhino Rack SX Series Legs and Aero Crossbars looked best. Relatively easy to set up.
I have a Toyota Prius C and I love how it looks with the Rhino Rack roof rack :D Here in Los Ángeles California I see so many cars with roof rack and I decided to buy one for my car and it looks Beautiful, it gives Style and I can not wait to put my bike and my Surfboard on it :D Thank You etrailer :D
I am very pleased with the etrailer.com. Easy to navigate website and expedited shipping for no extra cost. I ordered and received my product in about a week, which is very reasonable for being across the country.
The product arrived in tact and with no damage. Easy to put the rack bars on my jeep. I've included pictures of the completed result. We plan on buying the attachments that will mount our bikes and when we do we will be doing so from etrailer.
I purchased the Rhino legs, cross bars and J-style kaya carriers together and could not be more pleased with the combination. The system was installed in an evening and used the next day. The legs were very simple to install on the cross bars and then mount on the vehicle.
These feet worked like a charm! We were able to use these to install the Rhino Pioneer Rack onto our existing factory rack (2007 Toyota Land Cruiser). Adam at etrailer.com was awesome!
I spent a week reading reviews and forums to find the right one for my 2019 Jeep Cherokee that I just bought a few weeks ago. I just have to overthink everything but it paid off. I just received them this morning and installed them myself! First time for everything! It was really easy. The only part that was frustrating was the very first part... sliding the rubber pieces into the crossbars. They would not slide very well so I ended up using a bit of oil to make them slide better. Other than that, installation was easy and quick. I LOVE the looks of them. Very gorgeous!!! Thank you so much!! Very happy with the end result!!
Easy to install on the Bronco Sport factory roof rails allowing for a very low install height for the Pioneer platform!
Great product except it scratches the drip channel on the roof. Would recommend.
I would have given 5 stars except that upon delivery the boxes with the cross bars in them both had open ends and the bars were sliding out. Also the box containing the leg supports had a huge hole punched in the top. So I had to quickly do an inventory to make sure all the bits and pieces were still present and to check for any damage. Fortunately all was good, but I honestly don’t know how. I was lucky. Your shipping department needs a do better slip in the way they package things together. Otherwise great price, and Rhino-Rack I already knew was a highly rated product.
Shipped according to schedule, easy to install, and looks great. Can’t wait to put it to use. Thanks!
Nice, solid rack. It went together very easily. It will support my canoe and my rod rack fits well on it. It’s very light weight and the directions were spot on. There is also videos to help make installation easy.
It is rather hard to give a review on each part.
Here is the review of the SX-Series Rhino-Rack.
I enjoyed the detailed shipping status.
The bars will be used with a roof tent (also from etrailer).
Climbing trip to Idaho in a few weeks.
We shall see how well this all works!
Interestingly, the upper side of one internal bar is white with my black set.
Maybe it was missed in the painting process.
etrailer has been a pleasure to work with thus far.
I love this product.It was easy to assemble and easy to use.
Love the Rhino Roof Rack system plus the incredible Customer Care.
Despite obvious(fair amount of box damage) rough handling by the shipper. Everything inside looked great. And it arrived 3 days early. Thank you etrailer!
Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
Rhino Rack Accessories
Fit to this rack on your 2001 Honda CR-V
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Richard
11/13/2023
I really like how the racks are holding up. I kept them on the Jeep, but it is garage kept. I like them much better than my Thule racks. I havent put a kayak up there yet.