2017 Ford Escape Mud Flaps

Hi Dennis; Fogatti doesn't offer any control codes or specific processes for high elevation with the InstaShower 9 Pro #FG33FR. Here is what they say about high altitude use: If it exceeds 5,000 ft, it shall comply with the requirements of…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey George, the correct set of Westin R5 Nerf Bars for your 2026 Chevy Silverado 2500 double cab long bed would be the part #W63FQ which is stainless steel like you are needing as well. Are you up north with a lot of snow and don't want steps…

Good question, Todd! I spoke with Air Lift and the LoadLifter 7500 XL #AL83DQ will have no issues working on a 2025 Ford F350 Crew Cab Dually with the FX4 package. Have you considered an sir compressor system as well? They aren't completely…

Hi David, Rock Tamers require an inch of space on the ball mount shank in order to mount. If the portion of the shank exposed where you'll be installing the Rock Tamers is 2" x 2" then you'll want #ERT00108, for 2.5" x…

Hey Tom, yes the Weathertech floor mat set part #WT29SQ that you referenced is a confirmed fit for your 2023 Chevy Silverado 5500 regular cab. I attached a picture of what the mats look like installed in a customer of ours truck.

Hey Steve, yes a Rock Tamers mud flap kit like the part #RT47VR would work with the Weigh Safe adjustable ball mounts part #WS68RR and #WS56ZR. The ball mounts have enough clearance on the shank to allow the Rock Tamers to fit.

In order to use the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches part #ERT00110 you'll need a ball mount with extended length shank. For a 2-1/2" hitch, the best option we have would be the BulletProof Hitches…

Hey Chris, so you don't have the needed shank clearance to use the Rock Tamers part #ERT00110 so you could find a ball mount that has a longer shank to allow it to fit or you could go with something like the Access Mudflaps part #A89TJ that fits…

Hey Satran. The tallest 5th wheel hitch we have with a 30,000 lbs capacity is the Reese M5 item #RP68FR. This fits the Ford factory puck system and has three adjustable heights of 14", 16", and 18". The B&W Companion OEM 5th Wheel…

Hey Korry! The system with the coldest air and highest air flow is the Furrion Chill Cube. This system has an incredibly high 18,000 Btu cooling capacity. It also uses a variable speed compressor for efficient cooling. I know you're not looking…

Hey Travis, welcome back! You're friend makes a good point the only way to lock the B&W Companion OEM 5th Wheel Hitch item #BWRVK3305 is to use a padlock like item #Master Lock 1-9/16" Wide Solid Brass Body Padlock item #ML140DLH. The…