1996 Jeep Cherokee Replacement Mirrors

Hi George! I can definitely get you a full flat towing set up for your 2007 Honda Element EX. Almost everything I have included below is Roadmaster as they make some of the best flat towing parts on the market, but I did throw in our own tow bar.…

Hey Tim, I checked with Demco and the bracket kit part #DM8552027 that you referenced is correct for your 2014 Chevy Silverado 1500. Do you already have the rails and the hitch?

Hey Brian. The Trailer Valet RVR3 item #TVRVR3-BB225, you were looking at, is actually smaller than your Trailer Valet RVR5 item #TVRVR5. It's going to do even worse job on gravel plus it's way under-capacity for your 2023 Airstream Flying…

I'm certainly sorry to hear that someone kicked off the driver's side mirror of your 2007 Acura TL, though I can verify for you that the mirror you asked about is a fit for your car, and it is indeed for the driver's side: - K-Source…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey John, what dimensions specifically of the Curt A20 fifth wheel hitch part #C54VJ are you looking for? The height range of the hitch is between 17-1/2 and 21-1/2 inches which is normally the dimension people are looking for.

The CIPA Custom Towing Mirror - Driver Side #10801 that you referenced (which is also available in a set with part #CM10800) is confirmed to fit the following vehicles: 2002 - 2006 Chevrolet Avalanche 2000 - 2006 Cadillac Escalade 2002 - 2006…

Yes you can remove the mirror from the mounting bar it attaches to. There's actually two holes on the mount that you can use for the mirror to attach to. A bolt is what holds the mirror of the #CM41100 to the swiveling mount bracket.

Hey Cj! The wiring depends on whether or not you have the factory tow package. If you do have the factory tow package all you need is the 7- and 4-Pole Trailer Connector Socket #HM40975. The wiring connector would look like the one pictured below,…

Hey John, thanks for reaching out! The correct Curt A16 5th wheel hitch fitment for your 2010 Toyota Tundra is the Kit #C57VJ, and that's if you have the 6-1/2' bed. This comes with a custom bracket mounting kit so you'll have minimal…

Hey Michael, we have the Peterson Led Wire part #PET23NV which is a female style connector that is designed to work with the Peterson LED Side Marker and Clearance Light #PET25NV.

Thanks for the pictures Paul! What's the slope on your driveway? The Parkit360 Force Electric Trailer Dolly item #PA46VR only works on slopes up to 6%. You're good with the weight capacity and you'll definitely be able to make that turn.…