Ladder Racks Specs:
Features:
...for additional bracing Made in the USA Specs: Carrying capacity: 1,250 lbs Capacity of cantilever extension: 1,000 lbs Crossbar length: 69-1/2" Rack height (with base rails): 27-5/16" Warranty...
Installation Notes:
No drilling required for installation
More Information >Ladder Racks Specs:
Features:
...for additional bracing Made in the USA Specs: Carrying capacity: 1,250 lbs Crossbar length: 69-1/2" Rack height (with base rails): 27-5/16" Limited lifetime warranty TracRac Base Rails The Tra...
Installation Notes:
No drilling required for installation
More Information >Ladder Racks Specs:
Features:
...for additional bracing Made in the USA Specs: Carrying capacity: 1,250 lbs Capacity of cantilever extension: 1,000 lbs Crossbar length: 69-1/2" Rack height (with base rails): 27-5/16" Warranty...
Installation Notes:
No drilling required for installation
More Information >Ladder Racks Specs:
Features:
...for additional bracing Made in the USA Specs: Carrying capacity: 1,250 lbs Crossbar length: 69-1/2" Rack height (with base rails): 27-5/16" Limited lifetime warranty TracRac Base Rails The Tra...
Installation Notes:
No drilling required for installation
More Information >Ladder Racks Specs:
Features:
Retractable tonneau with contractor-grade, over-the-cab ladder rack for your vehicle lets you haul heavy cargo to a worksite. Aluminum slats and vinyl top layer combine the strength and security of a hard cover with the seamless look of a soft cover.
Installation Notes:
No drilling required for installation
Product is designed for vehicles with a Double cab.
More Information >Ladder Racks Specs:
Features:
Retractable tonneau with contractor-grade, over-the-cab ladder rack for your vehicle lets you haul heavy cargo to a worksite. Aluminum slats and vinyl top layer combine the strength and security of a hard cover with the seamless look of a soft cover.
Installation Notes:
No drilling required for installation
Product is designed for vehicles with a Regular cab.
More Information >Ladder Racks Specs:
Features:
Retractable hard tonneau cover with contractor-grade ladder rack lets you haul ladders, lumber, and other cargo to the worksite. Heavy-duty aluminum cover locks every 12" along the rails, and it retracts easily with quick-release handle.
Installation Notes:
No drilling required for installation
Product is designed for vehicles with a Regular cab.
More Information >Ladder Racks Specs:
Features:
Retractable hard tonneau cover with contractor-grade ladder rack lets you haul ladders, lumber, and other cargo to the worksite. Heavy-duty aluminum cover locks every 12" along the rails, and it retracts easily with quick-release handle.
Installation Notes:
No drilling required for installation
Product is designed for vehicles with a Regular cab.
More Information >Ladder Racks Specs:
Features:
Retractable tonneau with contractor-grade, over-the-cab ladder rack for your vehicle lets you haul heavy cargo to a worksite. Aluminum slats and vinyl top layer combine the strength and security of a hard cover with the seamless look of a soft cover.
Installation Notes:
No drilling required for installation
Product is designed for vehicles with a Double cab.
More Information >Ladder Racks Specs:
Features:
Retractable tonneau with contractor-grade, over-the-cab ladder rack for your vehicle lets you haul heavy cargo to a worksite. Aluminum slats and vinyl top layer combine the strength and security of a hard cover with the seamless look of a soft cover.
Installation Notes:
No drilling required for installation
Product is designed for vehicles with a Regular cab.
More Information >Ladder Racks Specs:
Features:
Retractable hard tonneau cover with contractor-grade ladder rack lets you haul ladders, lumber, and other cargo to the worksite. Heavy-duty aluminum cover locks every 12" along the rails, and it retracts easily with quick-release handle.
Installation Notes:
No drilling required for installation
Product is designed for vehicles with a Double cab.
More Information >Ladder Racks Specs:
Features:
Retractable hard tonneau cover with contractor-grade ladder rack lets you haul ladders, lumber, and other cargo to the worksite. Heavy-duty aluminum cover locks every 12" along the rails, and it retracts easily with quick-release handle.
Installation Notes:
No drilling required for installation
Product is designed for vehicles with a Double cab.
More Information >Videos
for Ladder Racks
Help Articles
for Ladder Racks
Expert Answers
for Ladder Racks
Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…
view full answer...For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...Hey Chad, so I'd actually recommend a mid size ladder rack like the Yakima OutPost HD Overland Truck Bed Rack #Y01152-58. This is by far going to be your best bet if you don't want to trailer your kayaks. These bars…
view full answer...Usually ladder racks use the inside edge of the top of the bed site to attach to the vehicle, but luckily there are exceptions to that. The Thule TracRac SR is typically compatible with tonneau covers that mount to the inside edges of the truck…
view full answer...Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only…
view full answer...The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.
view full answer...Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo…
view full answer...Tonneau covers and ladder racks can be compatible with each other when they do not use the same mounting points on the truck bed rails. Both tonneau covers and ladder racks can mount either inside the bed rails or on top of them. As an example, the…
view full answer...Hey Shannon, thanks for reaching out! Sounds like you're looking for the Thule Xsporter Pro #TH500XTB-THXK3 for your 2008 Toyota Tacoma with the Deck Rail System. This is adjustable up and down as well as along the Deck Rail System so…
view full answer...Hey Chris, Because the Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XTB clamps to the lip of the bedrails it won't be compatible with any tonneau cover. You would need Thule's stake pocket mounted version the…
view full answer...Unfortunately there are no plug-in adapters or harnesses that would allow you to replace the factory 4-way flat trailer connector with a 7-way or a 7-way and 4-way connector on your 2005 Ford F-150. To complete the installation for a brake…
view full answer...