1999 Jeep TJ Jeep Hardware

We recommend that all trailer tires be inflated to the max psi stated on the sidewall of the tire. If the tire is under inflated, the weight capacity is lowered to an unknown amount for that tire. Although running lower air pressures can improve…

Since Valley went out of business there are no direct replacement parts that are available but a repair kit like the Curt #C25194 for 2" Curt Couplers may be compatible. What I recommend doing is replace your coupler completely as…

The Yakima EXO Swing Away Enclosed Cargo Carrier for 2" Trailer Hitch #Y62VR may or may not cover your tail lights and license plate. If it does, you can add the License Plate and Tail Light Relocation Kit for Yakima EXO System #Y74VR…

I do have an option for you but I cannot advise you combine two hitch adapters together like the Roadmaster Hitch Extender part #RM-071 and the Roadmaster Dual Hitch Receiver Adapter part #RM-077-4 as this would be very unsafe. However, if you need…

Yakima does not recommend backing their Rack and Roll trailers like the #Y08107 you mentioned into water as the bearings aren't sealed and neither are the electrical connections. Your best option would be to back it right up to the waters…

Both the LED Trailer Mini Clearance #MCL10AKB and Uni-Lite LED Clearance #MCL11RKB will require an 11/16" hole for mounting. These both use the same Grommet #A11GB.

The best way to improve the handling and stability of your 2011 E-450 motorhome is going to be with a rear sway bar upgrade like the Hellwig part #HE78RR. This will make the biggest difference and honestly should be the first thing anyone with a…

I found the online version of the install instructions for the Exact Center stabilizers like the #RM47MR. What's fun is that just when you think you have found the correct step to address your problem it tells you to continue to the next…

We currently have not had a Ford F-150 with the power outlet in the bed to test fit a bed mounted 7-Way #C57008. I see no reason you will not be able to still install the 7-way as there is a large gap which can be seen in the installation video…

The Hellwig 7180 is our part number #HE78RR and the part 7718 is the part #HE26GR which I have confirmed fit your 2015 Tioga Ranger 31D on a E-450 chassis. I sent an update to have the instructions fixed.

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328…

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.