1975 Jeep DJ-5 Jeep Hardware

Hey Jeff. We've got a couple of options to add a Jerry Can holder to your 2024 Jeep Wrangler JL. They are the MORryde Jerry Can Mount for Jeep Wrangler JL - Driver Side item #MR27UR and Passenger Side item #MR87UR. These mount forward of your…

Hey Lawrence thanks for the information! I wasn't able to find any good pictures of the inside of your Axle Tecknology BD2-655 drums. What you'll need to do is pull one of the hubs off and look at the inside. If they're smooth like the…

Nice setup Jeff, happy to help! Since you've already ordered the B&W Turnoverball for your 2019 Ram 2500, my recommendation is the B&W Companion Sliding 5th Wheel Hitch #BWRVK3400-5W that's designed for the Turnoverball system.…

Hey Derek, your 2023 Winnebago Revel would have been made on a 2022 Mercedes Sprinter 2500 chassis which for sure does have the brake controller port under the seat like you mentioned. The Redarc Tow Pro Elite part #RED52CR is a really nice brake…

Hi Brad; thanks for pointing this out. I reached out to MORryde and can confirm that the #MR69MR will fit a 2" receiver. I'm not sure where that other information came from saying it wouldn't fit any receiver size, but the part that…

Hey Jim, The MORryde RotopaX Mount for Jeep Wrangler JL #MR77UR doesn't have a confirmed weight capacity but MORRyde did state that they tested it with two 2gal RotopaX cans on it and also with the Jerry Can Mount #MR27UR with 5 gal Jerry cans…

The Second Vehicle Kit item #SM99209 does not come with the coach link transmitter. You'll need to purchase it separately with the Demco Wireless Coachlink Braking Monitor item #SM99945. As far as a high low adapter goes, that's going to…

Hey Jesus! The #e98ZR comes with an alignment collar and a hitch pin. The Curt #C31006 does not include these and costs a little more. Outside of that, they are the exact same spare mount with different branding. What rig are you setting this up on?

Hi Nathan, The Rhino-Rack Roof Rack Legs #RRRL110S5-2 are a fit for the gutters on your 2023 Jeep Wrangler, but they are only 4-5/16" tall so you'd likely run into clearance issues with the sky top. To confirm you can measure up 4-5/16"…

Hey Mike, to add trailer wiring to your 2024 Ford Bronco you will need one of two kits. You would want the part #C42WR if the vehicle has LED taillights or the part #C87BR if it didn't come with LED taillights.

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

Yes, the Timbren kit part #TFR250SDG is the correct fit for your 2016 Ford F250 and would do a great job getting rid of the sag it is experiencing when towing. I attached an install video for more info for you to check out as well.