RV Jack Pads Specs:
Features:
Replaces 6 pads for your SnapPad jack stand pad system. Pads increase the surface area of the jack feet to help prevent sinking and provide added stability. 4 Pads fit 9" round jack feet. 2 Pads fit 11-1/2" or 12" round jack feet.
More Information >RV Jack Pads Specs:
Features:
Get more traction and stability for your camper's scissor jack by snapping these durable, molded rubber pads onto the base. Fits almost any scissor jack with a bowtie base and installs permanently so you never have to find a spot to store it.
More Information >RV Jack Pads Specs:
Features:
Replaces 4 pads for your SnapPad jack stand pad system. Pads increase the surface area of the jack feet to help prevent sinking and provide added stability. Fits 9" round jack feet.
More Information >RV Jack Pads Specs:
Features:
These 1" thick jack pads serve as a cushion so the metal jack feet on your Class A, fifth wheel, or travel trailer leveling system won't damage your driveway. Heavy-duty rubber resists corrosion and won't crack, even after extended use.
More Information >RV Jack Pads Specs:
Features:
These 1" thick jack pads serve as a cushion so the metal jack feet on your Class A, fifth wheel, or travel trailer leveling system won't damage your driveway. Heavy-duty rubber resists corrosion and won't crack, even after extended use.
More Information >RV Jack Pads Specs:
Features:
This 2" thick jack pad serves as a cushion so the metal jack foot on your Class A, fifth wheel, or travel trailer leveling system won't damage your driveway. Heavy-duty rubber resists corrosion and won't crack, even after extended use.
More Information >RV Jack Pads Specs:
Features:
These 5/8" thick jack pads serve as a cushion so the metal jack feet on your Class A, fifth wheel, or travel trailer leveling system won't damage your driveway. Heavy-duty rubber resists corrosion and won't crack after extended use.
More Information >Videos
for RV Jack Pads
Help Articles
for RV Jack Pads
Expert Answers
for RV Jack Pads
Hey Roger, thanks for reaching out! The Dometic RV Water Heater with Door Kit #DMC43RR is the best replacement we have for you since it works with gas and 12V power. It does fit a 12-3/4" tall x 12-3/4" wide x 19-7/8" deep cutout so…
view full answer...Hey Jason, thanks for reaching out! Yes, you can use the Weigh Safe Flap Jack Folding RV Stabilizing Blocks #WS78ER for holding your slide-in camper up with the HappiJac system. An alternative is the Lift Extenders Kit #LC182495 which offer a 6"…
view full answer...Hi Larry! To tow your 2025 Buick Enclave behind an RV, you would need to use something like the Roadmaster Tow Dolly with Electric Brakes - 4,250 lbs #RM-2050-1. I checked the owner's manual for your vehicle and it says you cannot tow it with all…
view full answer...Hey Forest! You aren't going to get the clearance you need from moving to the Heavyweight. Even if you did, that system is going to be overrated so you wouldn't want to use it with your trailer. You're better off sticking with the…
view full answer...Hey Henry, yes we do have the Snappads of the part #SN76FR that you referenced individually with the part #SP84FR. Did you lose one by chance?
view full answer...Hey welcome back, Jody. So your best option here will be to get a new 50 amp surge protector for your new travel trailer. If you did end up at a camp ground with 50 amp service you would want to have it. I know a lot of sites do have just 30 amp but…
view full answer...Congrats on the new trailer! I recommend the Portable Power Watchdog Surge Protector with Bluetooth, WiFi, and Emergency Shut Down - 50 Amp item #HU62VR over item #HU92VR because of it's ability to automatically turn back on once the power…
view full answer...Hey Dan! What are you experiencing when you tow your trailers? If you're getting rear sag with a little bit of body roll I would get the Coil SumoSprings #CSS-1168R for the additional suspension support. If you're primarily getting a lot of…
view full answer...Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…
view full answer...Hey Steve! I would go with the 18.5K GTW Weigh Safe True Tow Weight Distribution Hitch item #WS37RR over the 22K GTW item #WS99MR you were looking at. It looks like your Grand Design has a tongue weight between 1,200 lbs - 1,600 lbs and this will put…
view full answer...Hey Wayne, in order to find the correct SnapPads for your 2018 Mini-Lite 2109RB you're going to need to measure your current jack feet and let me know what size and shape they are. From here, I'll take a look at what we have and see what we…
view full answer...Hey Hal, while we don't have a different version of the Lippert replacement foot #LC324269 we can help with the SnapPad part #SP54FR which would fit the foot and would give it a lot more support and prevent the issues you are having. How many of…
view full answer...Filters
- 7 results
Contact and Help
What our customers are saying:
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN