RV Jack Pads Specs:
Features:
Replaces 6 pads for your SnapPad jack stand pad system. Pads increase the surface area of the jack feet to help prevent sinking and provide added stability. 4 Pads fit 9" round jack feet. 2 Pads fit 11-1/2" or 12" round jack feet.
More Information >RV Jack Pads Specs:
Features:
Replaces 4 pads for your SnapPad jack stand pad system. Pads increase the surface area of the jack feet to help prevent sinking and provide added stability. Fits 9" round jack feet.
More Information >RV Jack Pads Specs:
Features:
These 1" thick jack pads serve as a cushion so the metal jack feet on your Class A, fifth wheel, or travel trailer leveling system won't damage your driveway. Heavy-duty rubber resists corrosion and won't crack, even after extended use.
More Information >RV Jack Pads Specs:
Features:
These 1" thick jack pads serve as a cushion so the metal jack feet on your Class A, fifth wheel, or travel trailer leveling system won't damage your driveway. Heavy-duty rubber resists corrosion and won't crack, even after extended use.
More Information >Camper Jacks Specs:
Features:
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack 2 pads to get 12-3/8" of height and a 3,500-lb load capacity.
More Information >RV Jack Pads Specs:
Features:
This 2" thick jack pad serves as a cushion so the metal jack foot on your Class A, fifth wheel, or travel trailer leveling system won't damage your driveway. Heavy-duty rubber resists corrosion and won't crack, even after extended use.
More Information >RV Jack Pads Specs:
Features:
These 5/8" thick jack pads serve as a cushion so the metal jack feet on your Class A, fifth wheel, or travel trailer leveling system won't damage your driveway. Heavy-duty rubber resists corrosion and won't crack after extended use.
More Information >Videos
for RV Jack Pads
Help Articles
for RV Jack Pads
Expert Answers
for RV Jack Pads
If you have the Gooseneck versions of the Curt CrossWing ( #C92DR or #C32DR) you unfortunately would not be able to use the Rota-Flex with it. The pivoting head causing too much strain for the single point of contact you have with a gooseneck…
view full answer...Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to…
view full answer...Hey TJ, I went out and opened up one of the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System #LC324269 boxes and found that they include a 5/8-18 x 1-1/2" fine thread grade five bolt. I…
view full answer...Hello Darren. Thanks for reaching out, I can definitely help with this. To convert your 2024 Brinkley Z2900 5th wheel over to disc brakes, you will need a disc brake kit, a brake line kit, and electric over hydraulic actuator, and a breakaway kit…
view full answer...Hey Dan, The ground for the Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400 typically gets tied into the ground for the braking system to intertwine them so that they're active at the same time. When used…
view full answer...It's a bummer but you can't use a pivoting pin box with a fifth wheel hitch that only attaches to a gooseneck ball as the additional twisting torque that these types of pin boxes but on…
view full answer...Personally I prefer the SnapPad XTRA Jack Pads #SP54FR4 over the Stromberg Carlson #SC99MR as they have been around much longer and proven themselves to be a quality product. Both these will fit 4 jacks with a 9"…
view full answer...Hey Lamar, The Demco Autoslide 5th Wheel Hitch w/ Slider #DM69GV has side plates with attachment points that will drop right into your Ram's puck system an without the need of any other kind of adapters or rails. The…
view full answer...Thanks for reaching out, Kim! It sounds like you're needing the Replacement 17-rpm Lift Motor for Dometic FanTastic B Series Roof Vents w/Powered Lifts which comes in White #FVK6010-81 and Off-White #FVK6010-80…
view full answer...Hey Bill, for a 2025 Entegra Aspire the correct Snappads would be the XTRA XL part #SP74FR which is for 12 inch diameter round jack feet.
view full answer...Since you are using shore power, you can replace your Coleman with an Advent 15,000 Btu unit and just need the wiring adapter. I really like the low profile units so I recommend going that route, and you can choose from either White or Black in…
view full answer...It looks like you've got a Kwikee step motor 5973820 and according to my tech contact at Lippert the correct replacement motor is the Lippert Components Kwikee Step Motor Replacement Kit #LC379608. This is a direct…
view full answer...