1990 Pontiac Grand Prix Vehicle Engine Heaters

Hi William, welcome back! The ThermaHeat RV Holding Tank or Step Heater Pad #277-000163 will definitely help with your cold weather camping and it has been tested down to -32º F. I would also consider bringing along something like sheets of…

Hello Mark, thanks for reaching out. The Kat's Heaters Custom Engine Block Heater #KH97VR is correct for your 2024 Ford F150 STX 4X4 EcoBoost 2.7L engine. I am sorry to say I do not have a PDF of the instruction I can send, but I can provide…

Hey Edward! As long as you've got the understanding that the SumoSprings Solo Custom Helper Springs #SS66RR aren't a confirmed fit for your 2018 Suburban, I have no problems with you trying it out. Worst case is you try them out and they…

The Kat's Heaters #KH11813 is an aftermarket engine block heater that is confirmed to fit your 2009 Toyota Tacoma TRD Off-Road with the 4.0L engine (we do not carry Toyota OEM replacements parts). That being said, it's also compatible with…

Hey Raphael, we have the Kat's block heater part #KH11402 that is a fit for your 2007 Hyundai Tucson that has the 2.0 liter engine. This is the frost plug type.

Christopher, I did some research, and it looks like it should be by the exhaust on the driver's side of the engine, underneath the driver's side door. Immediately behind the driver side exhaust header there is a factory designed hole for the…

The Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts #KH11813 is a confirmed fit for the 3.5L V6. You should not need to alter the element or clip in any way and doing so is not recommended. You may want to…

Hey Gary, thanks for reaching out! Did you remove the end of the Replacement Lift Cylinder for Fisher Snow Plow #3371304305 with the silver piece on it? This isn't meant to be taken apart, and is comparable to the Fisher part numbers A318 and…

As long as you have found the correct hole in your 2015 Toyota Tacoma the Kat's heater part #KH11813 would be correct for it and should slide right in. Since the hole is somewhat difficult to access you are most likely not angling it in…

For your 2016 GMC Canyon, the correct engine block heater will depend on which size engine you have. If you have the 2.5L I4 engine then you will want to use part #KH11484 but if you have the 3.6L V6 engine then you will want to use part #KH11811. If…

No I do not, but I have something else. The only option for rear end support for your 2019 Honda Odyssey are the Timbren Rear Suspension Enhancement System item #T26FR. These replace your factory bump stops to help address sagging in the rear end.…

Yes, the Kat's Heaters Custom Diesel Engine Block Heater #KH30513 will fit the Powerstroke diesel engine on your 2024 Ford -F-250.