Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Hey George, the Westin HDX grille guard part #W45PF will block your sensors on the front of your 2025 Ford F-150 but it would not block a front facing camera if you had one.
Hi Brandon! For the Dexter 5-Leaf Slipper Spring w/ Flat End for 10,000-lb Trailer Axles - 30-1/2" Long #DX45QR, you will want the Bronze Spring Eye Bushing, 3/4" x 1" x 2-1/2" #14-67. This is a direct replacement for what came in…
Hello again Monty; I would get the black SumoSprings Custom Helper Springs #SS66PV. These have a capacity of 1,800 lbs so it gives you a bit over the blue without overdoing it. SumoSprings are a great choice if you don't want to go with the air…
The B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights is only available is white part #BWPUCP7520WA or black part #BWPUCP7520BA. B&W does not produce this ladder rack with a chrome or stainless finish.
Bruce, the Dexter 5-Leaf Slipper Spring w/ Flat End for 10,000-lb Trailer Axles #DX65QR is not the same as the Dexter 072-080-01, so yes the specs are correct. The spring you're referencing is the Dexter 5-Leaf Slipper Spring w/ Flat End for…
Yes, we have seen people fit crossover style tool boxes like you have on top of the B and W Headache Rack part #BWPUCP7520BA that you referenced. You'd need to position the box so that the lid can still open though.
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
Hi Randal! As the etrailer Hard Tonneau Cover - Folding - Fiberglass Reinforced Plastic #e98RV for your 2024 Toyota Tundra 6-1/2 Foot Bed with the Deck Rail System has weather seals on top of the bed rails, you will not need drain tubes. From what I…
Hey Rob, the Adarac Pro Series Custom Truck Bed Ladder #A38ZR does fit your 2022 Jeep Gladiator with the factory bedliner and will work great. There isn't any cutting or drilling required.
Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit:…
