Truck Grilles Specs:
Features:
Customize your Navigator with this stainless steel designer grille. Made from heavy-gauge material and featuring a hidden mounting system, this stylish insert will certainly set your vehicle apart from all the others.
Installation Notes:
Bumper Insert is not included
More Information >Truck Grilles Specs:
Features:
Customize your Navigator with this designer, stainless steel bumper insert. Made from heavy-gauge material and featuring a hidden mounting system, this stylish insert will certainly set your vehicle apart from all the others.
More Information >Videos
for Truck Grilles
Help Articles
for Truck Grilles
Expert Answers
for Truck Grilles
When you say "Bike started to come off the back of the trailer" does that mean that you are using the T2 Pro XTR #TH69TX on the back of a trailer? If so then that could be the problem. The issue is that there is…
view full answer...The Thule T2 Pro XTR 2 Bike Hitch Mounted Folding Rack, item #TH83JV, will accept up to 5 inch wide tires but, unless you have over 1 inch of clearance between the fender and the front tire on your cruiser with a fender, you will not be able to…
view full answer...You are right that the strap you mentioned isn't the correct fit, and I checked with Thule and there isn't a standalone strap available for a T2 Pro XT, but there is still an option for you. What you would need instead is to…
view full answer...You will want the hitch to be set at the height that 1) allows the trailer to be level, and 2) allows you a minimum of 6 inches between the bottom of the trailer loft and the top of the bed rails. The fifth wheel hitches offer several inches of up…
view full answer...When adjusting the arms of the #BWRVK3305, you have the option of setting up so the king pin will sit 3 inches forward or 1 inch forward of the axle. I'd set it up at the tallest height, 18-3/4 inches above the floor of the truck bed and 1…
view full answer...When installing The Hopkins 7-Way Molded Trailer Wire Connector #HM20048 on your 1984 Chevrolet C/K Series Pickup the black 12 Volt hot lead will have to be used in order for the brakes to work. I have attached the wiring code below: White Wire -…
view full answer...We don't have the specific number but what I think will be more helpful for you is the distance from the rear most portion of the bumper to the hitch pin hole. Which for the #41932 that dimension is 1-1/2 inches. Check out the picture I…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...The hitches we offer for your vehicle are designed for use with the factory bumper, but we do have options that might work for you. The deepest drop custom hitch we offer for that truck is the B&W #BWHDRH25187 which has a 6-1/2 inch drop.…
view full answer...Great question! The 2 gallon container of EXP90 adhesive included with the LaSalle Bristol XTRM Roof Install Kit #3442703414KIT will cover about 400 square feet (200 square feet per gallon).
view full answer...The B and W Gooseneck Underbed Hitch, part #BWGNRK1000, is designed to fit your 1999 Chevrolet C3500 with the long bed. Installing this hitch gives you the versatility of having a gooseneck hitch and also having complete truck bed access when you…
view full answer...For your 1989 Chevrolet 3500 K series truck you will want the B & W Gooseneck #BWGNRK1000, which has mounting hardware specifically designed for your truck. I have added a link that shows all of the gooseneck hitches available for the 1989…
view full answer...Filter Products (4)