Grille Guards Specs:
Features:
Rust-resistant steel tray lets you mount an electric winch on the front of your vehicle. Custom mount bolts onto your frame and accommodates most winches with up to a 12,000-lb capacity. Additional mounting holes let you install other accessories.
Installation Notes:
No drilling required for installation
Tow hooks must be removed (if equipped)
More Information >Grille Guards Specs:
Features:
...with included hardware Specs: Perimeter tube: 2" Headlight guard tube diameter: 1-1/4" Lifetime warranty Westin HDX Grille Guard w Punch Plate - SS...
Installation Notes:
No drilling required for installation
Trimming of air dam, lower bumper, or lower bumper grille required
Product will interfere with any front end sensors or cameras, if equipped
More Information >Grille Guards Specs:
Features:
This grille guard gives your vehicle a truly rugged look. Powder coated steel construction, heavy-duty wraparound wings, and full punch-plate grille offer maximum protection. Rubber-coated uprights shield grille guard from damage.
Installation Notes:
No drilling required for installation
Trimming of air dam, lower bumper, or lower bumper grille required
Product will interfere with any front end sensors or cameras, if equipped
More Information >Grille Guards Specs:
Features:
Get a complete winch-mounting system for your vehicle with this custom kit. Powder coated steel light bar bolts to winch tray so you can mount driving lights and an electric winch (sold separately). Fits most winches with up to a 12,000-lb capacity.
Installation Notes:
No drilling required for installation
Tow hooks must be removed (if equipped)
More Information >Grille Guards Specs:
Features:
This grille guard gives your vehicle a truly rugged look. Powder coated steel construction, heavy-duty wraparound wings, and full punch-plate grille offer maximum protection. Rubber-coated uprights shield grille guard from damage.
Installation Notes:
No drilling required for installation
Trimming of air dam, lower bumper, or lower bumper grille required
Product will interfere with any front end sensors or cameras, if equipped
More Information >Grille Guards Specs:
Features:
...off-road adventures Welded construction creates a durable, strong guard Quick, easy bolt-on installation No drilling required Mounting kit included Specs: Tube diameter: 1-1/2" 5-Year warranty Westin...
Installation Notes:
No drilling required for installation
Product will interfere with any front end sensors or cameras, if equipped
More Information >Grille Guards Specs:
Features:
Get a complete winch-mounting system for your vehicle with this custom kit. Polished stainless steel light bar bolts to winch tray so you can mount driving lights and an electric winch (sold separately). Fits winches with up to a 12,000-lb capacity.
Installation Notes:
No drilling required for installation
Tow hooks must be removed (if equipped)
More Information >Grille Guards Specs:
Features:
Polished stainless steel delivers sleek style on this rugged, rustproof bull bar. Skid plate provides bumper protection, and welded crossbar features integrated mounting points for driving lights (sold separately).
Installation Notes:
No drilling required for installation
Product will not fit on models with Adaptive Cruise Control or forward collision warning systems that feature grill mounted laser control sensors
More Information >Grille Guards Specs:
Features:
This grille guard gives your vehicle a rugged look. Powder coated steel construction, heavy-duty wraparound wings, and full punch-plate grille offer maximum protection. Built-in winch tray lets you mount a winch with up to a 12,500-lb capacity.
Installation Notes:
No drilling required for installation
Product will interfere with any front end sensors or cameras, if equipped
More Information >Grille Guards Specs:
Features:
...installation with included hardware Specs: Perimeter tube: 2" Headlight guard tube diameter: 1-1/4" 3-Year warranty Westin HDX Grille Guard w Punch Plate - Black...
Installation Notes:
No drilling required for installation
Trimming of air dam, lower bumper, or lower bumper grille required
Product will interfere with any front end sensors or cameras, if equipped
More Information >Videos
for Grille Guards
Help Articles
for Grille Guards
Expert Answers
for Grille Guards
This will depend on if you have a Dually #TL94PR or Single #TL67DR rear wheels on your 2021 Chevrolet Silverado 3500 long bed. These are a fit for the factory receiver, if you have or want to switch to a TorkLift Receiver #TL74FR this would use a…
view full answer...Hi KJM; assuming you have the factory trailer hitch the correct TorkLift camper tie-downs for your 2024 Sierra 3500 dually is the Custom Fit Tie Down Kit With TL44FR | TL84FR #TL94PR. This will fit with that built-in step…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Hi Grace, For a 2018 Chevy Silverado 1500 and Westin HDX Grille Guard you would need the Replacement Mounting Brackets and Hardware for Westin HDX Grille Guard #57-387pk.
view full answer...Hi Austin, I can help you determine the right replacement double-eye leaf springs for your 2018 Jayco trailer, though we don't have any way of knowing what specific ones you need. It's…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely…
view full answer...It sounds like you're looking for a replacement installation kit for a Westin Sportsman Grille Guard that fits a 2009 Ford F-150. If so, the Replacement Mounting Kit for Westin Sportsman Grille Guard #40-250PK is the…
view full answer...The replacement mounting hardware for the Westin HDX Grille Guard with Punch Plate #57-3835 that fits your 2020 Ford F-150 is part #57-383PK. Please note that grille guards and their hardware kits are vehicle specific fits.
view full answer...The punch plate refers to the mesh looking section at the top of the grille guard. I attached a picture with it pointed out.
view full answer...The Replacement Hardware Kit #AABRKT-5056 will fit the Aries Pro Series Grille Guard #AAP5056. This is the upgraded version of the Grille Guard #AA5056 which uses the same install hardware to attach to a truck.
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That…
view full answer...I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs…
view full answer...Filter Products (10)