Vehicle Style: 3500 - 8 Foot Bed Change
Gooseneck Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
No drilling required to install the frame brackets of installation kit. Installation rails are rated to meet vehicle manufacturer's tow ratings - see vehicle owner's manual
Passenger side wheel well must be notched for frame rail access
More Information >Gooseneck Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
No drilling required to install the frame brackets of installation kit. Installation rails are rated to meet vehicle manufacturer's tow ratings - see vehicle owner's manual
Installation kit fits Diesel Engine models
Hitch does not fit Cab and Chassis or vehicles with 34 inch frame
More Information >Gooseneck Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
No drilling required to install the frame brackets of installation kit. Installation rails are rated to meet vehicle manufacturer's tow ratings - see vehicle owner's manual
Installation kit fits Gasoline Engine models
More Information >Gooseneck Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
No drilling required to install the frame brackets of installation kit. Installation rails are rated to meet vehicle manufacturer's tow ratings - see vehicle owner's manual
Tech Tip:
On models with plastic wheel well covers, they may need to be temporarily removed if they interfere with installation.
More Information >Videos
for Gooseneck Hitch
Help Articles
for Gooseneck Hitch
Expert Answers
for Gooseneck Hitch
The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch.…
view full answer...The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the…
view full answer...You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500…
view full answer...Installation of both the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1394 for your 2002 Ram 2500 and #BWGNRK1308 for your 2009 Ram 3500 Mega Cab short bed will not require the bed to be lifted or…
view full answer...If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…
view full answer...According to B&W the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit part #BWGNRK1020 is about a 2 hour install by a professional. All the…
view full answer...Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.
view full answer...I recommend using the B&W Ball and Safety Chain Kit #BWGNXA2061 for the factory puck system on your 2020 Ford F-350 Super Duty. I like this kit of the Curt #C60692 and Reese #RP30137 options because it uses a…
view full answer...Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM…
view full answer...Between the Curt #C60692 and B&W #BWGNXA2061 that will fit your 2022 GMC Sierra 3500 with the factory pucks/prep package, I do prefer the B&W. Though both the Curt and…
view full answer...The shortest gooseneck ball we have for the 2024 Chevy puck system is the Reese Elite Series Pop-In Ball #RP23FR. This is going to be very similar to the Curt ball you mentioned. I have included some dimensions of the Reese ball below. From the top…
view full answer...