Videos
for solar charge controllers
Help Articles
for solar charge controllers
Expert Answers
for solar charge controllers
Hello Chuck, The correct screen for the Go Power MPPT Solar Charge Controller – PowerTrak – 12V and 24V – 30 Amp #GP32QR is the Go Power PowerTrak Screen – Touchscreen RV Control Panel – Auto-Dimming – Multi-Orientation #GP64XR. The Go Power!…
view full answer...It sure can Drew! The Onan Generator - QG 7000i Onboard RV Generator item #CM44MR is the same size as the 5500-watt Onan generator. It measures 33-5/8" long x 22-1/8" wide x 16-3/4" tall and weighs 201 lbs. What kind of RV do you have?…
view full answer...Great question, Sonia. Yes, the #GP85QR charger can be configured for lithium, AGM, or flooded lead-acid, and you can adjust those settings through the remote or the app. Once set, the inverter remembers the profile, even if you disconnect the…
view full answer...Hey Brad! I just went over this with Dometic/Go Power and you will need several wiring harnesses in addition to the #GP74XR you already picked up. To connect the Go Power PowerTrak Screen #GP64XR, Pure Sine Wave Inverter Charger #GP85QR, and MPPT…
view full answer...Yes, Marsha, that’s exactly what the #GP85QR is built for. Unlike the single-leg 30A #GP44XR, this one outputs on both legs, so it ties directly into a 50A distribution panel and supplies up to 3,000 W (not going to power the entire AC system of…
view full answer...Steve, for the #GP44XR (along with other models like the #GP85QR and #GP94XR) you’ll want at least 4" of open space on all sides, especially around the fan vents. These units can move a lot of air under load. Mounting it in a ventilated…
view full answer...Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
view full answer...Hey Johnathon, welcome back! It is normal for the PowerMax 11-Stage Smart Trickle Charger item #PM49VR to get warm during charging. Especially during the initial bulk charging stage when it works hardest to recharge a drained battery. You should…
view full answer...Hey Nancy, yes the WFCO Auto Detect RV Converter and AC/DC Distribution Panel #WF96FR that you referenced is the correct replacement for your WF8735P that you have now and is compatible with lithium batteries like you need as well. This is same shape…
view full answer...Hey Robert, The Go Power Solar Charge Controller #GP32QR doesn't have a hand held remote, but it does have a touch screen mount #GP64XR that will allow you to control it. Which comes with Bluetooth capability so you would be able to control it…
view full answer...Hello Jay, I’m curious what panel you’re planning to use. How many panels will you be running, and what is the total wattage? I want to make sure the controller I recommended is properly sized for your setup. Right now, your camper has the Go Power…
view full answer...Hey Bob, thanks for reaching out. Yes, I do think that setup will benefit from a weight distribution hitch. The camper isn't super heavy, but the Blazer could undoubtedly use some help handling it and a WD hitch will really help level things out.…
view full answer...
Filters
