Hey Darla, the correct MORryde X-factor for trailers that have a MORryde CRE3000 kit installed is the standard kit part #MR33WR. Running three of these would give you the most stable setup so that would be what I would recommend.
Hey Colton, thanks for reaching out! The correct replacement bearing kit for your 5,200 lb axle is the Bearing Kit #BK3-300. I was able to have my contact at Dexter Axle cross-reference these parts to make sure that's what came with your axle.…
Hey Richard, the bag that comes with the Andersen Camper Leveler part #AN68VR measures 15 inch x 8.75 inch x 6 inch. Are you wanting to repurpose the bag?
Hi Scott! There is a way to fine tune your Roadmaster Exact Center Steering Stabilizer #RM33RR. I included a link that you will want to scroll down to step 9 to see what you can do, but basically there are jam nuts you can adjust that can do much…
Hey Mark, thanks for providing all the details! I see you ordered the 18.5K Weigh Safe True Tow Weight Distribution Hitch (WDH) #WS49MR. This might be a little heavy for your application, but if you have your trailer weighed down to the GVWR and a…
Hello Alberta, thanks for reaching out. I have heard of this happening before with the Voyager monitors where condensation gets inside and fills the camera with water. Sadly there is not a great way to clean this and the camera is most likely done. I…
Hey Brian, thanks for the pictures. The etrailer Anti-Rattle Hitch Collar item #e38FV is not going to fit your Ascent's factory hitch. It's going to be a tight fit if you can even mount it with the chain hangers so close but the main issue is…
Hi Chris! Quartzsite sure sounds like a great stop - hope you’re soaking up that sun! Yes, the SnapPad StakPad blocks black #SN74VR or white #SN64VR are a universal fit and will work with your hydraulic auto-leveling system. They’re especially handy…
Hello Steven, thanks for reaching out. You are correct that using a swing away adapter or hitch extender will reduce your hitches carrying capacity by half. We put that warning on the part page for all of the hitch adapters we offer. So if the hitch…
...I went out to our warehouse and test fit some SnapPads on the feet of the Lippert High-Speed Power Stabilizer Jack # LC298707 and found that the 6" square SnapPads were a fit.
If your 2022 Forest...
Hey Terry, so the O-rings of the Lippert Replacement Foot part #LC324269 basically go on either side of the foot pad to allow it to pivot a little bit. It goes bolt, metal washer, o-ring, foot pad, and then o-ring.
Explore RV jack pads designed for 11-1/2 inch jack feet, perfect for those needing a set of 6. These pads offer stability and protection for your RV, ensuring a secure setup on various terrains. Ideal for enthusiasts who value durability and ease of use d
Yes, these pads are designed to be lightweight and stackable, making them easy to store in your RV. Their compact design ensures they don't take up much space, allowing for convenient transport and quick setup.
Absolutely, these pads are versatile and can be used on grass, gravel, sand, and asphalt. Their robust design ensures they maintain stability across different surfaces, making them a great choice for diverse camping environments.
These pads provide a larger surface area, distributing weight evenly and preventing sinking on soft ground. This ensures your RV remains stable, even on uneven terrain, making them a reliable choice for frequent travelers.
These pads are typically made from high-density polyethylene, known for its strength and resistance to cracking. This material ensures the pads withstand heavy loads and harsh weather, providing long-lasting performance.
A set of 6 pads is perfect for RVs with multiple jacks, offering comprehensive coverage and stability. This setup is ideal for larger RVs or those who frequently camp on varied surfaces, ensuring all points are supported.
Filters
