Hey Jacqueline! The Dexter Self-Contained Hydraulic Jack #DX72CR manual didn't have anything in it about a manual override, but in looking at the photos, the rubber plug on top of the cover should be where the manual override is located. Try…
Thank you for the photos, that really helps! It looks like you're needing the 1-diode 2-1/2" round lights from Optronics; Red #MCL0040RBB and Amber #MCL0040ABB. The lens looks to be the same design and the bases have the same mounting design…
Your best option is to use the Thule Compass Watersport Carrier #TH890000. The Compass is compatible with round, square, aero, elliptical, and most factory crossbars, including the ones on your 2019 Honda Passport. It can easily accommodate your two…
Hello Erik; the Redarc Tow-Pro Trail Brake Controller w/ Custom Harness #RED74UR is a new brake controller from Redarc. It is not the Elite or the Liberty with the main difference being the SwayStop feature. SwayStop is designed to be used when the…
Assuming that your 2014 Toyota Tundra has the factory 7-way trailer connector, in addition to the #RED24FR Redarc Tow-Pro Liberty, you'll also need the #331-TPH-017 pigtail and the #3040-P wiring adapter. The adapter and the pigtail would plug in…
We recommend that all trailer tires be inflated to the max psi stated on the sidewall of the tire. If the tire is under inflated, the weight capacity is lowered to an unknown amount for that tire. Although running lower air pressures can improve the…
Hi Elliott; the Valterra RV Water Tank #R8048 has three 3/8" threaded fittings on each end of the tank. You can see them in the attached picture, one has a red plug. The tank is only designed to be gravity fed or used with a hand pump, not an…
Hi Sandy; the etrailer RV Propane Tank Cover #e87VV is 17" x 12" and made of heavy-duty polyvinyl fabric. This is designed to fit your standard single 20-lb (5-gallon) LP tank.
It is perfectly safe to use a reducer sleeve like the Curt #C45405 to fit an accessory with a 2" shank into your 2-1/2" trailer hitch receiver. We do have options for you to use a ball mount with a 2-1/2" shank for when you want to tow…
Hey Joe, great question. You’re thinking about it the right way. You can technically run the charge line from the 7-pin’s 12V power wire straight to the positive post on your battery, but with lithium you’ll want to do it safely. Your truck’s…
For your 2022 Chevrolet Colorado with the TruXedo Elevate Truck Bed Rack System #TX26NV, I recommend going with the Yakima Kayak Roof Rack w/ Tie-Downs - Saddle Style w/ Rollers #Y04083-04082. This mounting kit will simply clamp around the crossbars…
I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex
Alex
Blowing Rock, NC
Dry Storage Map Cases for tidy trips
Keep maps and paperwork together and easy to spot with map cases built for dry storage. This setup streamlines how you pack so your important papers stay organized and ready when you need them.
Yes, just group items by size and keep edges aligned so they slide in and out cleanly. Avoid overstuffing the map case, which can stress seams and make closures harder to seal. If there are separate sections, keep quick-access items in the easiest spot to reach.
Start by measuring your map when it's folded the way you plan to use it. Compare those dimensions to the listed interior space of the map case and leave a little room so closures aren't stressed. If you laminate or use heavy paper, account for extra thickness so the seal can close smoothly.
Lay the map flat and smooth out sharp creases before sealing the map case. Wipe dust or moisture from the map and the window to reduce haze. If glare is an issue, rotate the case slightly or reposition under softer light to improve contrast.
Rinse off grit and salt with fresh water, then air dry the map case fully before storing. Keep it flat or loosely rolled to help prevent creases. Avoid prolonged heat or direct sun in storage, which can warp clear panels or make them cloudy.
Filters
