Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey, Mark! That’s a great question! I took a look at the Maxxis tire and wheel combo, part #MXS67FR, and they measure 27" in diameter. We size our tire covers based on the actual tire size, not the cover itself. The etrailer tire cover, part…
Hey Raymond, since the 5k rated etrailer jack part #e55ZV is rated higher than the 3.5k option you also mentioned it will work a little bit quicker since it won't be working quite as hard. With that said it's not a fast jack by any means. It…
Hi Chris! I would be shocked if the wheels have a 5 on 5 bolt pattern. I don't think I have ever seen a 12" wheel with that bolt pattern. They will typically have a 5 on 4-1/2 bolt pattern and I would encourage you to have him look at the…
Hello Eric, The #K2R35DKG is Dacromet-coated, and the calipers are treated with KodaGuard. The #K2R35DS, on the other hand, is made entirely of stainless steel, hence the higher price. If you're in an area where road salt is common or if…
I recommend mounting the Low Profile LED Flood Light #OPT64FR on the upper frame of your trailer. This light is 2" tall and will broadcast the light down at a 45 degree angle. The housings are made of aluminum to help protect the light from…
I have attached a photo for you that shows how a 7-way trailer connector is wired. If you take a look at the trailer side trailer connector you will see a terminal labeled "12V Power". If you were to run a wire part #10-1-1 (per foot) from…
Hey Leonard, yes the USB Power Outlet for RVs part #37215115 that you referenced can be used in a car application. It was designed to wire to a 12 volt power system like what a vehicle would have so it would work just as well there.
I can definitely understand your frustration as the Fulton F2 Swing-Up Trailer Jack with Dual 7" Wheels, Sidewind -1,600 lbs F1413100334 is not a cheap jack so it would be nice to replace the plastic housing part number 9 in the included diagram…
Thank you so much. You guys have been wonderful to work with.
Henri
New Orleans, LA
Illuminate Your Work with Halogen Lights
Halogen work lights are perfect for brightening up any workspace, especially when you need reliable illumination for tasks like loading ramps or trailers. Known for their intense brightness and durability, these lights are a go-to for those who need consistent performance in various settings.
Halogen work lights provide intense, focused illumination, making them perfect for tasks like loading trailers. Their durability ensures they can withstand frequent use, and their bright light helps illuminate large areas, ensuring safety and efficiency during nighttime or low-light conditions.
Halogen lights offer a warmer, more natural light compared to the cooler tone of LEDs. They are often preferred for their ability to provide consistent brightness and are typically more affordable upfront. However, they may consume more energy and generate more heat than LEDs.
Yes, halogen work lights are designed to be robust and can handle outdoor conditions well. They are built to withstand the elements, making them suitable for outdoor projects or settings where they might be exposed to weather changes.
Halogen work lights typically require a standard power outlet and can range from 500 to 1,500 watts, depending on the model. It's important to ensure your power source can handle the wattage to avoid any electrical issues.
To maintain halogen work lights, regularly check and clean the bulbs and housing to prevent dust buildup. Ensure the lights are turned off and cooled down before handling. Replacing bulbs as needed and storing them properly when not in use will also extend their lifespan.
Filters
