Truck Bed Step - WeatherTech

I will be happy to help you find a cargo bag for your 2010 Hyundai Tucson. We have several cargo bags that will fit on a vehicle with no roof rack. I have included a link to them for you. Since you need cargo space for the whole family, a larger bag…

The Westin Truck-Pal Fold-Up Bed Ladder, Item #10-3000 is a universal fit that would work great on your F-150. It is mountable on trucks with bed covers and tailgates on trucks that are 38 inches or less from the graound. The ladder stores on and…

1. The BAK Revolver #BAK24ZR and TruXedo #TX96FR are very similar in design so there really isn't a "better" option, but I personally prefer the BAK #BAK24ZR simply because it sits flat. I'm constantly setting things on my cover…

Hey Richard. The difference in the three MORryde hand rails is how far they extend away from the side of your trailer and how long the railing goes down the stairs. The MORryde item #MR34RV extends out 16" from the mounting point and has a…

Hey Donald! I'm assuming you're saying you have the deck rail system on your 2024 Tundra. Is that correct? Assuming it is, and you have the 5-1/2' bed, the Access Vanish Soft, Roll-Up Tonneau Cover #A28GW you looked at is the right one to…

I reached out to GCH and they said that the only thing that would cause this is a pinched wire during the installation. I would go ahead and double check all of the wiring you accessed during the #3460010 installation to make sure all of the wires…

I contacted the manufacturer about the wires and turning off the guidance lines on the Custom Third Brake Light Camera for 8" Factory Monitor #3460010. What they said was to go to the camera and the main cable coming off of it has 2 sets of…

The third cable you mentioned for the Truck Bed Cargo Camera #3460010 will indeed plug in between the camera and module cables also included with the kit. The red and black leads are for the camera's power and ground. The module also includes…

I have attached a couple images below of the installation manual for the GCH Truck Bed Cargo Camera #3460010 that you referenced. I have also included a full install video on the 2018 GMC Sierra that you can follow along with.

The camera of the GCH Truck Bed Cargo Camera #3460010 adjusts inside a ball and socket. You can just rotate the camera around and swivel it inside that socket. I attached a picture that shows the ball pointed down like you are wanting. If your socket…

When using a bike rack on a Motor home we run into the issue of the distance being to great from the rear wheel to the receiver tube opening. Typically this is a lot further distance than that on a passenger vehicle and subjects the rack to a lot…

On the 2011 Ford F-250 Super Duty, the brake controller port is located behind the center dashboard access panel on the passenger's side. One end of the #3034-P adapter will plug into the back of the brake controller and the other end plugs into…