Tool Organizer - Erickson

Hi John! The etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches - Vinyl Coated Steel #e99007 could be used with weight distribution, but I don't think it's the one I would go for. It works really well for things like bike racks, cargo…

Hey Deven, welcome back! Sadly, the brushes that come on the CargoSmart Boot Cleaning Brush #3481733 are not sold as a replacement part. If your brushes are worn out the only option would be a whole new unit.

Hey Bruce, this is a great question but the issue with the Curt trailer wiring harness part #C76QV has been resolved and it no longer requires the wires being swapped. You will be able to install this and not have to worry about the trailer…

On an 4 foot long section of E-track #EM19147 and 2 screws every 16 inches that is a total of 6 screws in the aluminum frame. This most likely will not get you near the capacity of the E-track. I recommend bolting through the aluminum frame so that…

The vast majority of bearings that are used on trailers are manufactured in China. I know that there is a looming mentality that anything from China is cheap and will break easily, but in the case of bearings, like the popular #L44649, you will get a…

Hey John! Yes, the Easy Grease Trailer Idler Hub Assembly for 2K Axles #AKIHUB-440-2-G-EZ-1K looks to be exactly what you're needing! What boat trailer do you have?

To know exactly what key will fit your enclosed trailer's access door lock we'll need to know the brand and the key code. For example, since you were looking at a Bauer door lock, if your key code was 357 then you could use the Replacement…

Hello again Billy; the Spindle Nut Kit for EZ Lube Axles #6-190 will fit the Dexter axle on your 2022 Reflection 295R.

We do offer the Bulldog Trailer Jack #BD178201, but it's unfortunately on extended back order at this time so it could be a bit before you get these in hand. If you need some jacks right away then I recommend going with the Pro Series Round,…

We do not carry the brand tires you said you have on your jet ski trailer so I cannot provide much information about their performance. We do have radial tires that would work for your trailer if that is the way you want to go. You can expect a…

Thanks for the photo. To remove the wheel that doesn't have lug nuts and bolts, you will need to remove the cotter pin that holds the wheel in place. Bend the two prongs up to straight and then push that end through the spindle. That wheel and…

It sounds like to me that you are wanting to attach shelves to the e-tracks in your box truck. If that is the case then what we have for this is the CargoSmart Shelf Track Brackets part #3481726 which I think is what you are looking for but if it is…