Hey Edgar, so we have pretty similar designs to the part #TP48KR in different colors that are the same size. For darker we have #TP98KR More like a light gray #TP78KR Lighter tan #TP68KR Darker brown and leather #TP32KR
Hi Lynn; this particular model of the Thomas Payne Trifold RV Loveseat and Sleeper #LC42PX only comes in the Black Granite. The 62" Rest Easy Trifold has more colors available if you're trying to match something. We have the following:…
Hey Fred! You will need to take some measurements to determine if you will have enough clearance with the B&W Gooseneck Pin Box #BW23RV. You can use the following formula: (A + B) - C = Clearance A = Distance from the gooseneck ball center to the…
Hi Jeanette; the Thomas Payne Trifold RV Loveseat and Sleeper - 80" Long #LC64FC is the only thing we have in the Canvas Back Granite color. The closest match with any kind of furniture is the Thomas Payne Dual Reclining RV Loveseat #TP98KR…
Hey Ralph! The Thomas Payne RV Jackknife Sofa w/ Hinges, Hardware #TP76KR requires at least 3" of wall clearance to function properly. Are you upgrading your sofa or did the old one wear out?
Hey Jeff! Yes, the Thomas Payne Seismic Right Arm #TP62AR, Left Arm #TP65AR, and Armless RV Recliner #TP63AR will all connect. Together they will form a complete couch. Just make sure you have 82-1/2" for this to fit in your 2023 Grand Design…
Hey Frank. I checked our specs and with Lippert and the Thomas Payne Seismic Power Loveseat w/ Console item #TP65KR requires a 26" wide entryway. This couch comes in three separate pieces but the seats still measure 27.5" wide x 38"…
Hey Nicholas, the front to back depth of the sleeping surface of the Thomas Payne Sleeper Sofa part #LC94FC that you referenced is 70 inches. Is that big enough?
Hello Chris, Thanks for reaching out. I completely understand wanting to confirm this before installing, especially with tight aisles and wall clearance. When the Thomas Payne RV Jackknife Sofa #TP58KR is upright, it measures 30" deep, including…
Hi Kelli, thanks for reaching out. Yes, we offer several Thomas Payne RV recliners that are designed for RV use. The highest weight capacity we have for these recliners is 300 lbs on the Heritage models like #TP52AR and Signature Swivel Glider models…
Hi Mark; according to Lippert the Thomas Payne RV Jackknife Sofa #TP86KR is a "wall hugger." This means it can sit right up against the wall in the upright position. You don't need a certain amount of space behind it.
Swap in a 72 inch wide trifold sofa for roomy seating that converts to a real sleeper at camp. Measure your slide-out depth and the space in front so the bed can open fully, and check your RV doorway opening against the required opening for the sofa you choose. This combo balances stretch-out comfort with a size that still works in most Class A and Class C layouts.
Often, yes. Look for an install manual that shows the back assembly bolted to the base—techs commonly remove the backs and feet to reduce the carry-in size. Protect upholstery with moving blankets and keep track of bolts. Reassemble on the slide, then center and level before final positioning.
Match the sofa's depth to the hard surface depth on your slide. If your current sofa fits and the new one is the same depth or a bit less, you should be in the clear. Measure from the wall to the trim and note carpet thickness so the front feet land firmly on the hard surface.
Use the sofa's listed depth when folded into the sleeper and measure that distance from the back wall to the nearest obstruction. If your available space exceeds the listed sleeper depth, you're good. Check that drawers, a dinette, or steps aren't in the way of the foot of the bed when extended.
It can, but check the listed minimum doorway for the sofa first. If your opening is tighter, look for an install manual that shows a removable back assembly bolted to the base. Removing the backs and feet, and gently compressing the arms with moving blankets and ratchet straps, can help it through a 24 inch opening.
Filters
