Rear View Mirrors - 12 Inch Long, No Added Features

The screws are there to be replaced when you replace the gasket or perform any maintenance on your sensor.

I have seen several people use the Mounting Bracket #HM40978 to relocate the 7- and 4-Pole Trailer Connector Socket #HM40975 on their 2019 Toyota 4Runner to a more easily accessible location. I have linked a image below showing where they remounted…

Hello Chris, Great question! To be honest, I could not find anything that was listed different so I reached out the manufacturer to get the answer. The difference between the two is one has a check valve and the other is just a pass through. The…

I can say that Curt doesn't consider the hitch a fit, but if you look at the provided photo, you can see the mounting hole spacing on the hitch and compare it to the frame member of your truck.

The two K-Source panoramic aspheric rearview mirrors you referenced, parts #KSRM1300 & #KSRM1100, are both general-fit products not intended for any particular vehicle. They both feature fully adjustable spring-loaded mounting brackets that work…

We do offer replacement mirrors, like CIPA Rearview Mirror #CM33000, but we do not offer the glass as a separate item. Rear view mirrors come in wedge-style and cam-lock styles. (See image) Both use a slide-in fitment for the mirror's base to…

The K-Source Panoramic Mirror, Part #KSRM012, is intended as a universal fit item that will fit a majority of original equipment mirrors. If the rear view mirror of your Acura TL is between 2-1/8 and 2-7/8 inches tall and no thicker than 3/4 of an…

The tallest clip on style of mirror we offer is the K-Source Panoramic Aspheric Rearview Mirror #KSRM1300 which can fit over mirrors that are up to 3-1/2 inches tall. Since that doesn't seem to be tall enough a full mirror replacement like the…

Even though both the Trailair Air Ride #LC158778 and the Trailair Flex Air #LC369535 look similar and incorporate the air bag and shock to help improve your towing experience, the Flex Air has a few upgrades that the Air Ride does not have. The 2…

Hey Kevin, The rubber plate for your customer's Rota-Flex pin box is unfortunately not sold separately and would not be a replaceable part. They would be looking at a complete replacement of the pin box. To find the correct replacement we'll…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The only way to use sway control on a trailer that uses a pintle hitch set up is to use the Tuson electronic sway control system #335TSC-1000. The trailer has to have electric brakes to use this though. When it senses sway it will apply the trailer…