Heading to new campgrounds is easier with Camco portable RV surge protectors that help guard your rig and flag faults like open neutral or reverse polarity. Choose 30 amp or 50 amp to match your setup. Options include easy-to-read LED status, 1,050, 2,450, or 3,850 joules of protection, and versions that run diagnostics for up to 2 minutes before powering on.
Yes, Camco portable units can be used with generators, but indicator lights may differ from a household outlet. Using adapters like twist-lock to RV 30 amp can change what you see on the analyzer. Verify your generator output is stable, then follow the same steps: plug in the protector first, allow diagnostics, and connect the RV once the indicators show correct wiring.
Some Camco portable units automatically reset when power returns to a usable range, while others are one-and-done and need to be replaced after a surge. Choose the style that matches how you camp and the level of reuse you want. If you prefer automatic recovery after an outage or fluctuation, look for the resettable type.
Expect a brief delay before power flows. After plugging a Camco portable unit into the power source, give it at least 2 minutes to run through diagnostics. Watch the indicator lights and wait for the good-to-go signal before connecting or switching on RV loads. If lights don't change after that, unplug and recheck your hookup.
It can show open neutral under heavy load. If the indication clears quickly, that momentary change isn't typically a concern. If it stays on while the A/C runs, have the wiring inspected to confirm safe use. If it only faults after you plug in the RV, check the outlet and your RV cord, especially the white neutral wire, for damage or loose connections.
30 Amp
50 Amp
RV Surge Protectors Parts or Accessories
Filters
