RV Sinks - Trough Sink

The overall dimensions of the Better Bath RV Kitchen Sink part #LC421572 including the lip are 25" long x 15" wide x 7" tall. The lip is 1" so if you wanted the bowl dimensions that would be 23" long x 13" wide x 7"…

Hey Mark, we have the RetraxPRO MX part #RT80485 that is a confirmed fit for your 2024 GMC Sierra 3500 long bed. The fit of this is not based on the OEM puck kit as that would not affect anything related to the cover. Are you wanting to cover a fifth…

The Everchill Mini Fridge For RVs 4.5 cu ft #EV96RR and the Everchill's 3.3 Cu Ft 12V RV Refrigerator #EV66RR don't include brackets in the box, Jeremy, but they do have mounting points on the bottom. Most RV builders or DIYers use L-brackets…

Hello Brian, thanks for reaching out. With the Brophy Cable Camper Jacks #CJ74, the L-bracket sits about 3" out from the edge of the jack tube. So it doesn't give you a whole lot of extra clearance. It will only work on setups where you have…

Hey Kenton, the Fogatti Insta Shower part #FG33FR can fit basically any RV including your Brinkley G-3250. What water heater do you have now?

Given the issue you described and the fact that you have done a good job of troubleshooting and checking other potential sources for the issue, it sounds like the motor is going bad. Since you mentioned the landing gear working fine for a little bit…

For a 25-3/4" x 14-3/4" cutout we have the following single bowl and double bowl options: Single Bowl: Better Bath RV Kitchen Sink #LC385313 Double Bowl: Better Bath RV Kitchen Sink #LC388412 Better Bath RV Kitchen Sink #LC385314 LaSalle…

Hey Jeff, Definitely smart to check and I went ahead and verified directly with TorkLift the correct tie-downs for your 2021 Ram 1500 with a 5-1/2' bed, factory hitch and no boards under your truck bed. The correct fit is the following: -…

Based on the SKU number you mentioned what you have is a Dometic Brisk Air II which the part #DMC46FR is the correct replacement shroud for.

Hey Tony, when you put on the vehicle blinkers yes the side camera view that corresponds with that blinker will be shown on the monitor of the Furrion Vision S system part #FR74AD.

The LaSalle Bristol, #34416166PW is close to those measurements being 15-3/4" Long x 12-13/8" Wide. You will not need to have exact matching measurements for it it work. You will need for the counter cut out to be large enough for the bowl…

Hey Mason, thanks for the info on your current steps. Based on seeing that the correct replacement mounting plate is the part #MR79DR that you referenced.