Videos
for RV Gas Detectors
Help Articles
for RV Gas Detectors
Expert Answers
for RV Gas Detectors
You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.
view full answer...The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a…
view full answer...Hey Wayne, to replace the Atwood propane gas detector you have now you could use the part #AT36681 which also is a carbon monoxide detector.
view full answer...Since the Atwood 31013 LP Detector has been discontinued you can replace it with the RV Propane Gas Detector - 12 Volt - 2 Wire - Black #RS44FR. This detector is a surface mount design and can easily swap out your old unit in just a few minutes.
view full answer...Harvey, you’re right on target asking about sizing. The AFMD35121 was a 35k BTU unit that’s been discontinued. You can step into the 35K BTU #DMC74MR furnace by Dometic, but it is 2 inches taller than your current one. Most folks just enlarge the…
view full answer...We do have a couple of options to replace your Atwood 36636, and you can use either, with the only difference being the color: - RV Propane Gas and Carbon Monoxide Detector - Black #RS54FR or White #RS34FR Either will work perfectly as replacements…
view full answer...I wasn't able to find the Atwood 36720 RV Propane Gas Detector you mention, however I was still able to find the RV Propane Gas Detector #RS64FR in white, or #RS44FR in black to work as a replacement for your Protechtor Series 2001 LP Gas…
view full answer...I recommend the #RS34FR to replace your current LP gas detector. This is a simple 2 wire design making for easy installation.
view full answer...Hi Brenda, The Atwood 31013 unfortunately has been discontinued so you'd need to go with a completely new LP gas detector. We have a couple of surface mount style detectors that come with trim rings that will cover the old unit's cutout hole…
view full answer...Hey Robert! Yes, the RV Propane Gas Detector #RS64FR (white) and #RS44FR (black) can be mounted vertically to better fit that existing cutout.
view full answer...Hey Jeff, thanks for reaching out! Yes, if you buy the RV Propane Gas and Carbon Monoxide Detector #RS54FR right now in 2025 and install it, it will last until 2030. Did your last detector go out, or are you just looking to get your RV ready for…
view full answer...Hello Dennis, You can use your current Chinese races, and just get the bearings from the Timken Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal #TMK32VR. You will want: - Inner bearing: Timken Replacement Trailer Wheel Bearing -…
view full answer...Filter Results
Carbon Monoxide and Propane
$111.76 - $111.76
Propane
$55.71 - $55.71