Welcome back Jim! The Yakima FlipFlop High-Low Adapter item #Y64MX will indeed work to help lower the deck height on your cargo rack. It'll lower the 2" receiver connection by 2-1/8". The Yakima FlipFlop item #Y64MX has a 350 lbs weight…
Hey Dennis, thanks for the picture! The Telescoping Dinette Table Leg item #TX73VJ does not have a size limit for the table top. 52” x 32” is going to be completely reasonable depending on the material. You can use whatever top best fits the space…
Hey Jimmy, the Thomas Payne Signature Dinette Cushion #TP99AR that you referenced is sold as enough cushions for one chair basically. So if you wanted to complete a set for the left and right benches you'd need to order a quantity of two of…
Thanks for letting us help Michael. For the leaf springs, I'd recommend the 4-Leaf Double-Eye Spring #e54SR. This is a 25-1/4-inch double-eye spring that's a great fit for your 3,500-lb axle. If you haven't already planned on it, I'd…
Hey Margaret. The brackets of the Replacement Leg Kit for etrailer RV Dinette Tables item #e79RR are made of metal not plastic. The bracket base measures 6-5/16" in diameter by 2-1/4" tall. The leg itself is 28-1/2" tall overall with…
Hello Matt, Thanks for writing in, that’s a great question. I’ve definitely heard the same concerns about the factory leaf springs on these, especially on larger toy haulers like your Wolf Pack. It makes sense to want something that’s going to hold…
Hey Tom, thanks for reaching out. The Progressive Dynamics 9300 Series is lithium compatible, but it is not a direct replacement for your complete WFCO WF-8735P power center. Since you are looking to upgrade to LiFePO4 and replace the existing unit,…
Hey Grant, the Telescoping Dinette Table Leg with Adjustable Top and Large Base for RVs #TX73VJ that you referenced was not designed to be removable easily like you are wanting.
Hey Lisa! I did some digging online and while I don't know what the exact bolt mount dimensions are for your Lagun table leg, I do believe that the Telescoping Dinette Table Leg #TX73VJ uses the same 4" on-center 6-bolt pattern (see attached…
The Everchill RV Refrigerator #324-000119 is the closest size refrigerator we have which will fit into the cutout for your Dometic RM1350. Your refrigerator fits a 63-3/16" tall by 32-3/4" wide and 26-1/16" deep opening. The Everchill…
Hey Chris, that information is what we need to confirm. I reached out to Lippert with that LCI number and the response was you have a 1621 with 15.5k weight capacity. Curt Flex Air 5th Wheel Pin Box #LC328492 is going to be a direct replacement and…
Welcome back Jim! The Yakima FlipFlop High-Low Adapter item #Y64MX will indeed work to help lower the deck height on your cargo rack. It'll lower the 2" receiver connection by 2-1/8". The Yakima FlipFlop item #Y64MX has a 350 lbs weight…
Hey Dennis, thanks for the picture! The Telescoping Dinette Table Leg item #TX73VJ does not have a size limit for the table top. 52” x 32” is going to be completely reasonable depending on the material. You can use whatever top best fits the space…
Hey Jimmy, the Thomas Payne Signature Dinette Cushion #TP99AR that you referenced is sold as enough cushions for one chair basically. So if you wanted to complete a set for the left and right benches you'd need to order a quantity of two of…
Thanks for letting us help Michael. For the leaf springs, I'd recommend the 4-Leaf Double-Eye Spring #e54SR. This is a 25-1/4-inch double-eye spring that's a great fit for your 3,500-lb axle. If you haven't already planned on it, I'd…
Hey Margaret. The brackets of the Replacement Leg Kit for etrailer RV Dinette Tables item #e79RR are made of metal not plastic. The bracket base measures 6-5/16" in diameter by 2-1/4" tall. The leg itself is 28-1/2" tall overall with…
Hello Matt, Thanks for writing in, that’s a great question. I’ve definitely heard the same concerns about the factory leaf springs on these, especially on larger toy haulers like your Wolf Pack. It makes sense to want something that’s going to hold…
Hey Tom, thanks for reaching out. The Progressive Dynamics 9300 Series is lithium compatible, but it is not a direct replacement for your complete WFCO WF-8735P power center. Since you are looking to upgrade to LiFePO4 and replace the existing unit,…
Hey Grant, the Telescoping Dinette Table Leg with Adjustable Top and Large Base for RVs #TX73VJ that you referenced was not designed to be removable easily like you are wanting.
Hey Lisa! I did some digging online and while I don't know what the exact bolt mount dimensions are for your Lagun table leg, I do believe that the Telescoping Dinette Table Leg #TX73VJ uses the same 4" on-center 6-bolt pattern (see attached…
The Everchill RV Refrigerator #324-000119 is the closest size refrigerator we have which will fit into the cutout for your Dometic RM1350. Your refrigerator fits a 63-3/16" tall by 32-3/4" wide and 26-1/16" deep opening. The Everchill…
Hey Chris, that information is what we need to confirm. I reached out to Lippert with that LCI number and the response was you have a 1621 with 15.5k weight capacity. Curt Flex Air 5th Wheel Pin Box #LC328492 is going to be a direct replacement and…
Going with a 38l x 30w inch tabletop gives you comfortable space for meals and cards without crowding your setup. Installation is pretty easy, and once mounted it looks great. The solid, quality feel makes it a simple upgrade for a camper or a 5th wheel.
Yes, installation is generally straightforward. Confirm whether you're reusing your existing legs or need a leg kit. Align the tabletop to your mount and tighten hardware evenly. If holes don't line up, mark and pre-drill carefully to avoid tear-out. A quick test-fit before final tightening helps ensure a clean look.
You can get plain white with no visible grain, as well as wood-grain finishes like Maple and Cherry. Pick the look that best matches your interior. If you prefer a smooth, solid color, choose the plain white. For a warmer look, go with a wood grain.
Inspect the surface and edges for any small dents or chips before attaching the leg. Dry-fit the mount to confirm hole spacing and alignment. If reusing hardware, make sure fasteners bite cleanly. Tighten by hand first to prevent stripping, then snug up for a solid fit.
It can, if the mounting and support match your setup. Check how your plywood backer or support base attaches to the table mount. Verify the attachment style and spacing match your hardware. Confirm the tabletop size and edges align with your cushions so the surface sits level when lowered.