Welcome back Jim! The Yakima FlipFlop High-Low Adapter item #Y64MX will indeed work to help lower the deck height on your cargo rack. It'll lower the 2" receiver connection by 2-1/8". The Yakima FlipFlop item #Y64MX has a 350 lbs weightâĤ
Hey Dennis, thanks for the picture! The Telescoping Dinette Table Leg item #TX73VJ does not have a size limit for the table top. 52â x 32â is going to be completely reasonable depending on the material. You can use whatever top best fits the spaceâĤ
Hey Jimmy, the Thomas Payne Signature Dinette Cushion #TP99AR that you referenced is sold as enough cushions for one chair basically. So if you wanted to complete a set for the left and right benches you'd need to order a quantity of two ofâĤ
Thanks for letting us help Michael. For the leaf springs, I'd recommend the 4-Leaf Double-Eye Spring #e54SR. This is a 25-1/4-inch double-eye spring that's a great fit for your 3,500-lb axle. If you haven't already planned on it, I'dâĤ
Hi Tina; the Thomas Payne RV Jackknife Sofa and Kickboard - Fold Down - 62" Wide - McCoy #TP34AR uses a PolyHyde polyester which is specifically designed to combat the flaking you have experienced. It won't hold up forever, but it does tendâĤ
Hey Margaret. The brackets of the Replacement Leg Kit for etrailer RV Dinette Tables item #e79RR are made of metal not plastic. The bracket base measures 6-5/16" in diameter by 2-1/4" tall. The leg itself is 28-1/2" tall overall withâĤ
Hey Tom, thanks for reaching out. The Progressive Dynamics 9300 Series is lithium compatible, but it is not a direct replacement for your complete WFCO WF-8735P power center. Since you are looking to upgrade to LiFePO4 and replace the existing unit,âĤ
Hello Matt, Thanks for writing in, thatâs a great question. Iâve definitely heard the same concerns about the factory leaf springs on these, especially on larger toy haulers like your Wolf Pack. It makes sense to want something thatâs going to holdâĤ
The Everchill RV Refrigerator #324-000119 is the closest size refrigerator we have which will fit into the cutout for your Dometic RM1350. Your refrigerator fits a 63-3/16" tall by 32-3/4" wide and 26-1/16" deep opening. The EverchillâĤ
Hey Grant, the Telescoping Dinette Table Leg with Adjustable Top and Large Base for RVs #TX73VJ that you referenced was not designed to be removable easily like you are wanting.
Hey Chris, that information is what we need to confirm. I reached out to Lippert with that LCI number and the response was you have a 1621 with 15.5k weight capacity. Curt Flex Air 5th Wheel Pin Box #LC328492 is going to be a direct replacement andâĤ
RV Dinette Table Tabletop Only with Color Match Trim
Swap out a worn surface with a tabletop only replacement. The color match trim keeps the edges coordinated with cherry, white, or maple finishes, and sizes include 36L x 30W Inch, 38L x 30W Inch, 40L x 30W Inch, 42L x 30W Inch, and 44L x 30W Inch. Some tops weigh 20 lbs, so check your pedestal or bed support for the weight you need.
Match the length and width to your current dinette opening. Common sizes include 36 x 30, 38 x 30, 40 x 30, 42 x 30, and 44 x 30 inches. Measure your existing table and the space around the seating. One buyer chose a top about 1/2 inch wider than the original and planned for that fit, so compare clearances before you decide.
Expect meaningful weight. Some tops weigh 20 lbs, and one user noted a 23.5-pound top when replacing a lighter 11.5-pound original. If you plan to remove the table often for open seating, check the listed weight and make sure your pedestal and lifting ability fit your routine.
Choose Cherry Wood Laminate, Maple Wood Laminate, or White Wood Laminate with like colored trim for a coordinated edge. White has no visible grain, while Maple and Cherry have actual wood grain. Compare to your cabinetry and flooring to pick the closest match.
Yes, it's designed to pair with your existing support. If your setup removes the legs and rests on cleats to form a bed, it can workâconfirm your cleats and mount match the new top's size. Check weight support too; some tops are 20 lbs while another was 23.5 pounds. Verify your pedestal or hardware can support the weight.