Hey Edgar, so we have pretty similar designs to the part #TP48KR in different colors that are the same size. For darker we have #TP98KR More like a light gray #TP78KR Lighter tan #TP68KR Darker brown and leather #TP32KR
Hi Lynn; this particular model of the Thomas Payne Trifold RV Loveseat and Sleeper #LC42PX only comes in the Black Granite. The 62" Rest Easy Trifold has more colors available if you're trying to match something. We have the following:…
Thanks for reaching out, Jim! When the Thomas Payne Trifold #LC22PX is folded down into the bed position, the sleeping area measures 70" long by 55" wide. It's a bit shorter than a full sized mattress but a bit wider than one. Are you…
Hey Fred! You will need to take some measurements to determine if you will have enough clearance with the B&W Gooseneck Pin Box #BW23RV. You can use the following formula: (A + B) - C = Clearance A = Distance from the gooseneck ball center to the…
Hey Ralph! The Thomas Payne RV Jackknife Sofa w/ Hinges, Hardware #TP76KR requires at least 3" of wall clearance to function properly. Are you upgrading your sofa or did the old one wear out?
Hi Jeanette; the Thomas Payne Trifold RV Loveseat and Sleeper - 80" Long #LC64FC is the only thing we have in the Canvas Back Granite color. The closest match with any kind of furniture is the Thomas Payne Dual Reclining RV Loveseat #TP98KR…
Hey Jeff! Yes, the Thomas Payne Seismic Right Arm #TP62AR, Left Arm #TP65AR, and Armless RV Recliner #TP63AR will all connect. Together they will form a complete couch. Just make sure you have 82-1/2" for this to fit in your 2023 Grand Design…
Hey Frank. I checked our specs and with Lippert and the Thomas Payne Seismic Power Loveseat w/ Console item #TP65KR requires a 26" wide entryway. This couch comes in three separate pieces but the seats still measure 27.5" wide x 38"…
Hello Chris, Thanks for reaching out. I completely understand wanting to confirm this before installing, especially with tight aisles and wall clearance. When the Thomas Payne RV Jackknife Sofa #TP58KR is upright, it measures 30" deep, including…
Hey Nicholas, the front to back depth of the sleeping surface of the Thomas Payne Sleeper Sofa part #LC94FC that you referenced is 70 inches. Is that big enough?
Hi Kelli, thanks for reaching out. Yes, we offer several Thomas Payne RV recliners that are designed for RV use. The highest weight capacity we have for these recliners is 300 lbs on the Heritage models like #TP52AR and Signature Swivel Glider models…
RV Couches and Chairs built for 72 Inch Wide spaces
Swapping seats in a tight slide or salon? 72 inch wide options fill the span cleanly and make the most of a full-width opening. Check whether the width is measured at bracket edges or cushions, and verify if the design needs a small gap behind the back or can sit flush. Fold-out sleepers are available, but wall-fold storage styles aren't. Confirm doorway and fold-out depth clearances for an easy fit.
Often, yes—some options come with legs and a kickboard included, so no separate leg kit is needed. Review the what's-in-the-box details to confirm. If a separate universal leg kit is shown, make sure it's actually required for the specific sofa you're considering.
It varies by design. Some need at least 1-1/2" of clearance between the wall and the top of the sofa to pull out, while others note no extra clearance behind the couch. Also check the folded-out depth—some list 42" when down—so you know how far it will extend into the room.
Check the listed minimum doorway requirement. Some specify a 26" minimum. If your door is around 24-1/2", it can be tight; compare carefully to the stated minimum. If the spec says 26", a smaller opening can be too tight even if others have squeezed similar pieces through.
It can, but verify how the 72" is measured. Some list 72" at the outside edges of the mounting brackets, while the seating portion is narrower. Check for any side trim or hardware that could eat into your opening, and confirm the measurement is bracket-to-bracket or cushion width before ordering.
Filters
