Patio Accessories - SeaSucker

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

Hey Mitch, yes that is something that we do! You will have to call in to our customer service department to get everything ironed out though. Do you already have your setup or are you also needing that as well? If you don't you're going to…

Yes, it does Michael! The Toyota specific mounting panel item #331-TPSI-002 is included with the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness item #RED82CR. The custom harness included with this kit will allow you to have a simple plug…

Hey John! Do you know what your 2025 NoBo 19.2 is prepped for? If it is Voyager you can use the Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RVs #ASA37YR. If it is Furrion you need the new Furrion Vision S+ Wireless…

Hello Jeremy, I sent that number over to lippert and they were not able to find anything. Can you please send me a picture of the sticker if it is still on there? Should have a S/N number and and RPO number, I included a picture of what the stickers…

Carrier is no longer making RV AC units but I do have a solution. You can use the Advent Air RV Air Conditioner - 13,500 Btu - Black #ACM135B. You will also need the Carrier Adapter Wiring Kit for Advent Air RV Air Conditioners #ACCARKIT for…

Hey Mike, thanks for reaching out. The 60" x 23" dimension listed for the #MR87ZV cargo tray is the overall dimensions of the tray. The inside dimensions of the tray are 58-1/4" long x 19-7/8" wide.

Hello Bryan, thanks for reaching out. The MORryde RV Cargo Sliding Tray #MR83FR is 41-3/4" wide overall and this is counting the tracks on each side. The actual opening requirement for this tray would be 38-7/8" since that is the width of…

Hi Harry; you can actually add sensors to the TireMinder i10 #TM98FR since it supports up to 20. All you need to do is order additional sensors using #TM66FR to cover your Ford Maverick. This will keep everything together on a single monitor.

Hello Art, thanks for reaching out. We do offer installation services here at our facility in Wentzville Missouri, and if you would like to bring your car and RV to us, we are happy to take care of you. If you are looking for something a bit closer…

I went to the warehouse and took some measurements of the Camco Hitch-Mounted Flagpole Holder, part #CAM51611. I have attached a photo of the CAM51611 with the dimensions noted. With the distance of 15-1/4 inches from the center of the hitch pin hole…

Hey Robert, so the way we determine rise and drop is basically what you described. Zero would be the same height as the top of the trailer hitch opening. What you are looking for we would call a drop of 1 inch. Unfortunately we don't have that…