SeaSucker Recycle Waste Bag Holder - 12" x 7" Opening - Vacuum Mount - White

Video Transcript for Detailed Breakdown of the SeaSucker Recycle Waste Bag Holder

Hello, neighbors. Steven here with etrailer.com. Today we're looking at our SeaSucker Recycle Waste Bag Holder with a 12-by-7-inch opening. It's gonna be vacuum-mounted in a nice white color. So, folks, again, this is a simple bag holder. You could either dispose of waste on your boat or maybe have just a spot to throw some wet swimsuits, towels, those kind of things inside.

It also uses two 4 1/2-inch pump-activated vacuum cups to then mount it to a non-porous surface, such as a boat gunnel, sidewall, bait tanks, consoles, those kind of things. Now, the bag itself is a nice mesh bag, as you can see, and it's got the SeaSucker name on it. It also has little built-in pouches, one on that side and one on the other. So, you could put some stuff in there maybe. You've got a lid, or opening, rather, with a nice little drawstring and you could simply cinch that down as needed.

Now, how does this work Well, pretty simple. You take these provided clips that come with it. I found that if you kind of just roll them off, they come off pretty simple. And then you would simply put the bag inside. Again, you don't have to use this bag.

If you're using this for swimsuits and towels, you can maybe put your waste inside of another trash bag or something, put a trash bag on here. And again, to put it back on, I simply roll that on. I found that it's easier. And then, again, you could do all four sides by simply just rolling those clips into place. And I've just got it set up here for demonstration purposes, so, I don't have it the neatest on top here, but the concept's there, right So, simply put, you'd have your bag here, and, again, you can mount it to a non-porous surface, maybe the side of a boat or something like that, and then you have a spot to put your wet gear or trash.

So, I'm gonna go and set these clips to the side and the bag, and then we're gonna show you how the vacuum portion of these vacuum mounts work. So, starting off, they are a 4 1/2-inch vacuum mount. They come with a hard plastic cover for both of them. That's really important actually because you want to keep these surfaces clean of dirt, debris, and nicks and burrs 'cause, again, it's literally, by pumping, it's vacuuming out the air, and if there's a nick or something on the edges, then it might not work. So, you wanna make sure you just have it on a flat surface. You simply push down just a little bit and you just keep pumping that pump until all the orange disappears and then you know it's vacuumed in place. Now, I've only done one side right now just for demo purposes. That's got a strong 240-pound pull force whenever you've got them in place and you can't pull it off, you can't push it off, pop it off. You've got two rubber tabs here. You simply push in and pull up lightly on them and they will release that vacuum and let air in to remove them. So, again, you're pumping this until it's fully gone as far as the orange. I do recommend, sold separately, you pick up some lubrication gel and it's like a waterproof lubricant. It's gonna keep the plunger free of debris and that kind of stuff and just in good working order. Now, as you can see, this is white in color. It's made right here in the US. Has a nice limited lifetime warranty from the manufacturer. As far as some dimensions, once again, it's 12 inches long in the opening by seven and it extends out from the mounting surface 11 inches. So, a very nice little vacuum-mounted trash recycle waste bag holder with included bag and clips. That's gonna wrap it up for our quick look today, folks. I'm Steven. Thanks for watching.