Videos
for Marine Power
Help Articles
for Marine Power
Expert Answers
for Marine Power
No, the SmartPlug RV Power Cord Adapter #SM93VR does not provide power to both legs. It only provides power to one side/leg of the 50amp service.
view full answer...Yes, it's very common that most campsites only offer 30 amp service and you would not have an issue still using your SurgeMinder Surge Protector and Circuit Tester - 50 Amps #SU99SR to protect the trailer along with an…
view full answer...Based on the available information for your 2022 Airstream Flying Cloud 30FB it looks like you have Dexter #11 Torflex axles. Assuming that is accurate, you need the Torflex Lift Kit - Tandem Axle - 2-7/8" Lift…
view full answer...By king pin sleeve I believe you are referring to a gooseneck to 5th wheel coupler adapter, and there is one for a square inner tube: - Gooseneck to 5th Wheel Trailer Coupler Adapter - Inner Tube - Square - 25,000 lbs #KPG5-Q25-IP The #KPG5-Q25-IP…
view full answer...The SmartPlug RV Power Inlet #SM97FR would be wired to the trailer and would be paired with a SmartPlug power cord, like part #SM59FR, that has a matching connection for the inlet and a standard 30 amp connector on the other end to connect to the…
view full answer...I do see the 2024 Ford Transit 350 is unchanged from the 2023 model year so there should be no reason the SumoSprings Solo Custom Helper Springs #SSR-121-54. When I reached out to SumoSprings they have not yet been able to verify fitment yet as…
view full answer...The Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes #HS481-8067 is designed to be completely plug-and-play so the female end of the 7-way would need to connect to the 7-way cable that's already…
view full answer...Kenny, those bolts for the B&W Companion 5th Wheel Trailer Hitch #BWRVK3500-5W should be torqued to 40 ft. lbs. Also, the pivot arms would need to be torqued to 80 ft. lbs, the draw down bolt should be tighten to 60 ft.lbs…
view full answer...It would not, the cap would not fit over the male metal tabs. Instead you would want the part #F30COVSS to use with the part #F30MLPSY .
view full answer...Yes the SmartPlug RV Power Cord #SM86FR that you referenced will stay flexible when the weather is cold. This would not get difficult to wrap up if the temperature was to drop.
view full answer...Yes, all you'll need to do is disconnect the three wires running from the converter section in your Progressive Dynamics 4100 #PD4135K from the AC distribution panel (circuit breaker, ground bus bar, neutral bus bar). This…
view full answer...Thanks for the photos they were very helpful, and the answer to your question is yes, the Power Grip 90-Degree Locking RV/Marine Power Cord with Handle - 50 Amps #CAM55572 will abslolutlely work for what you are trying to do. There…
view full answer...