How To Does A SmartPlug Power Cord Connect To A Shore Power Pedestal

Question

Question:

I dont see how the Smart Plug can be plugged into a standard rv park 30 amp receptacle. With the prongs of the Smart Plug being recessed, it seems impossible. Thank you for your help.

asked by: Gary O

1

Helpful Expert Reply:

The SmartPlug RV Power Inlet # SM97FR would be wired to the trailer and would be paired with a SmartPlug power cord, like part # SM59FR, that has a matching connection for the inlet and a standard 30 amp connector on the other end to connect to the shore power pedestal.

expert reply by: Kevin C

1

Answer 1

Yes, we do have a cap for the female end of the 30A SmartPlug RV Power Cord #SM59FR. What you're looking for is the Weathercap #SM43FR.

view full answer...

Answer 2

Hey Paul, You'll actually need a different 15 amp adapter for the SmartPlug RV Power Cord - 30 Amp #SM59FR. For your 15 amp residential plug you'll just add the Mighty Cord RV Power Cord Adapter Plug - 30 Amp Female to 15 Amp Male…

view full answer...

Answer 3

The SmartPlug RV Power Cord #SM59FR weighs 9-lbs. This cord is rated for 125v or 30Amps, and is 30' long. I have attached a review video for you too check out as well.

view full answer...

Answer 4

Hey David, thanks for reaching out. The SmartPlug RV Power Inlet and Connector #SM27FR comes with the 30 amp female outlet and matching male plug. It sounds like you are also needing a cord to go with it, and we do have those in both 25' and…

view full answer...

Answer 5

Hey Peter, what hanger dimensions do you need? What height from the mounting surface does the bolt hole need to be? With that I can see if we have a thicker gauge steel hanger option.

view full answer...

Answer 6

Hey Jason, thanks for reaching out! Yes, you can use the Weigh Safe Flap Jack Folding RV Stabilizing Blocks #WS78ER for holding your slide-in camper up with the HappiJac system. An alternative is the Lift Extenders Kit #LC182495 which offer a 6"…

view full answer...

Answer 7

The mounting flange of the SmartPlug RV Power Inlet #SM97FR is flat which means it was designed to mount to a flat surface. To accommodate the roundness of where you plan to mount this you could use washers to take up the extra space.

view full answer...

Answer 8

Hi Michael; the distance between all of the SmartPlug RV Power Inlet #SM97FR mounting holes is 2.44" on center. I went ahead and attached the mounting hole template below for your reference.

view full answer...

Answer 9

I spoke with the manufacturer of the SmartPlug RV and Marine Power Inlet and Connector #SM67FR and for your application they actually recommend using 6 AWG wire to properly supply your RV with power from the shore power pedestal.

view full answer...

Answer 10

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…

view full answer...

How To Does A SmartPlug Power Cord Connect To A Shore Power Pedestal

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching