View Cart

Review of Furrion Boat Accessories - Marine Power - F30ITRGS

content loading



Customers compare F30ITRGS to these similar products




Products Featured in this Video



Furrion Boat Accessories - Marine Power - F30ITRGS Review


Today we're going to take a look at the Furrion gray round 30 amp marine power inlet. Now this round marine power inlet will let you hook up to shore power using your power cord. It uses a quick lock cap to help keep the inlet dry, and on the very front they have a nice Powersmart LED here on the cap that will indicate when power is present at the plug. It does use a marine-grade fiber-filled polyester outer casing. They do use nickel-plated brass connectors to help resist corrosion, and when you go to install your wiring, you just unscrew this, take it all the way off, run your wire through there, make your connections, and then slide this back up and just tighten it down.This is a universal fit. It's compatible with other brands.

It is a bolt-on installation. It does come with the rubber gasket to give you a nice good seal, and this part is tested to marine UL 498 and CSA 22.2 standards. You can see it is a gray color. Amperage on this is 30 amps. Voltage is 125 volts.A few dimensions on this.

Overall dimension is going to be right at 4", total depth from the very front to the very back right at 3-7/8". Then again I had mentioned the quick lock cap. You can see to open it, it does require a little bit of pressure to open it up. Once you get it open, you can plug it in, and then when you're done, you just push it, and you can hear it click and lock into place.That should do it for the review on the Furrion gray round 30 amp marine power inlet.


Questions and Comments about this Video

add comment

Info for this part was:

Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.