Hi Thomas! The distance from the center of the hitch pin hole to the center of the ball on the #BW77BR is 13-5/8". This is designed to fit a 2-1/2" receiver with a 10k rating for the 2" and 21k rating for the 2-5/16" ball. What…
It sure will Hans and congrats on the new Outback! The Redarc Tow-Pro Link Bluetooth Brake Controller item #RED57AR is going to work great with your 2026 Subaru Outback Wilderness. Since you have the factory tow package, all you'll need to do is…
Hello Ben, Thanks for writing in! Yes! The WeatherTech Front Auto Floor Mats #WT54TZ you were looking at are made specifically for the factory vinyl floor in your 2026 Ram 2500. For the rear, WeatherTech does not have a matching custom-fit rear mat…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Hey Andrew. The Redarc Tow-Pro link will indeed work just fine for your 2026 Toyota BZ, and due to it not needing a brake output wire you do not need to hook up the brake out put wire at all. You'll plug the USCAR pig tail #20147 into the Tow-Pro…
Hey Ben, the deciding factor is really where your current jack mounts and whether you want it to stay in that same location. If your enclosed trailer already has a standard A-frame jack opening and you’re happy with the jack staying in the center,…
Hi Tracy, The etrailer Replacement Fabric for etrailer Slide-Out Topper part #e65QV is 96" wide (8ft) and 48" (4ft) deep. It will work with etrailer brand and Solera slide out toppers. The replacement fabric is also packaged with poly cord.…
Hey Robert! That Stromberg Carlson foot won't work but we actually do have the replacement SnapPad for your leveling system. The Replacement Pad for SnapPad Jack Stand Pad System - 9" Round Jack Foot #SP54FR is what you need. It works with…
Good question, Aaron. Since your main detail is the GM MultiPro tailgate, I’d be careful here. The B&W Tow & Stow for 2-1/2" receivers #BWTS20066BMP is specifically listed as compatible with the GM MultiPro tailgate, so if tailgate…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
Thanks for your question Brian. I've included a graphic showing the hole spacing for the mounting bracket on #ARK79FR. Of note, this jack does not include the hardware or a backing plate in order to mount it to your trailer frame. It is meant to…
Hey Noah, so the vertical bike racks like the Thule Revert #TH73VA are so tall they end up putting quite a bit more leverage and torque on the hitch they are installed in. This is why Curt doesn't want you to use them with their hitches like the…
The Experience Has Been Great.The People I Have Spoken To Have Answered Any Questions I may have had. I have Nothing But positive Thoughts About The Company. I Will Purchase again!!!!!!!
Hitch Pins and Clips for Secure, Simple Connections
Lock down your ball mount, bike rack, or coupler with hitch pins and clips sized for 1-1/4", 2", and 2-1/2" receivers. Choose standard, locking, or anti-rattle styles; anti-rattle pins fit hollow shanks, while solid shanks use an outside clamp with a standard locking pin. Running multiple locks is easier with keyed alike options, and extra-long pins help clear larger 2-1/2" hitches.
Yes—some locks offer a Keyed Alike option so multiple hitch and coupler locks use a single key. Select that option when you order to have all locks match. Keep the key code noted; replacement keys can be ordered by code for certain locks.
Only if your accessory has a hollow shank—anti-rattle hitch pins are designed for hollow shanks. If you're towing with a solid shank ball mount, use an external anti-rattle device that clamps the receiver and shank. Then add a standard locking hitch pin for security.
Match the pin to your receiver size, like 1-1/4", 2", or 2-1/2". Check the usable length so it spans the tube and still lets the lock or clip engage. If space beside the receiver is tight, choose a low-profile lock body to fit where there's barely any room to the side of the receiver.
Thread-on lock ends feel very secure and are convenient to tighten. Some locks let the key pop out when you press the lock closed, so there's no fiddling. Certain options work with a vehicle's center cut key for simplicity. Also check the lock body shape so it clears safety chains and doesn't rub.
Fits 1-1/4 and 2 Inch Hitch
Filters
