Hey Louise, the width of the LED Light Strip for Thule RV Awnings #TH301660 is 8mm and is the correct replacement LED strip for your Thule Crown 5200 awning.
Entry door locks, like the Bauer Products #BA64FR, typically will have a sticker on the inner handle portion that sits inside your RV, but I have installed a few where they also have the key code on a sticker on the inner components of the handle.…
Hey Larry. The Redarc Liberty #RED24FR Won't light up with the brake pedal if no trailer is hooked up, or if you are sitting still. It's a proportional controller so it needs to detect movement. You really need to hook up your camper to…
That's what we're here for Jim you're not bothering anybody. I found those parts you need for your Equal-i-zer Weight Distribution System item #EQ90-00-1000 and have listed them below: Replacement Snap-Up Lever for Equal-i-zer Weight…
Hey Dustin, thanks for reaching out! The only surefire way to know if your brakes are free backing or not is to hook your trailer up to your vehicle and back up. If your trailer tires lock up then you have standard hydraulic brakes and need the kit…
The LED Light Strip for Thule RV Awnings part #TH301660 is 8mm wide and the LED Light Strip for Thule RV Awnings part #TH307135 is 12mm wide but that is the only difference.
Hey Doug, According to my research you're going to need the Replacement Kwikee Electric Motor Assembly with 14NM IMGL RV Steps #LC75JX. This doesn't come with any cables/sensors, but if you let me know what you're needing, I'd be more…
We do have the correct replacement motor for your 2019 Fleetwood Bounder 36f, but the Replacement Motor for Kwikee 25 Series Electric RV Steps #LC369506 is not it. From you picture I can identify that you have the 676062 motor. We do carry the 676062…
It sure will, the Curt #C24VV TriFlex Brake Controller is indeed compatible with electric over hydraulic brake actuators. You will also need the #C51453 brake controller wiring harness. I'll link you to the instructions for the #C51453 wiring…
Something is obviously causing a voltage drop between the brake controller and the trailer connector. The usual culprit in this type of situation is a break in the wire or a corroded wire. Check the wiring under the truck. You should be able to trace…
Yes, but the orientation of how the regulator is mounted will matter because the vents on the regulator will need to always be facing down to prevent them from getting clogged. If you plan on mounting the regulator horizontally or vertically…
I will start by saying tankless is definitely the way to go. They supply hot water significantly faster and more continuously than tanked models and tend to take up less room as well. Now down to the nitty-gritty. The Fogatti InstaShower 8 Pro RV…
Rampage car seat covers are available in solid black or black/gray two-tone to match your interior style. On some listings, the neoprene component is actually vinyl; vinyl is waterproof and flame resistant, so you get durable protection with an easy-to-clean surface.
Yes, some options are combo packs with front seat covers, a steering wheel cover, and seat belt pads. If you want a two-tone look, choose a black/gray combo. Verify the color in the description against the images to get the style you expect.
Choose by the description: solid black or black/gray two-tone. If the photo shows a gray center but the description says black, select the black/gray option. If the listing mentions neoprene, note the component could be vinyl, which is waterproof and flame resistant.
They can fit Jeep seats great. Confirm fit by matching your exact vehicle and seat configuration. If the cover seems loose or misaligned, recheck that it's the correct application for your seats.
Rampage offers solid black and black/gray two-tone options. If a cover is listed with neoprene, verify the material; the neoprene component may actually be vinyl. Vinyl is waterproof and flame resistant. Compare the written color to the photos and pick the sections and tones you prefer.
Filters
