Car Insulation - R7

Hey Andrew, brand running boards that fit your 2020 Ford Transit T250 do require drilling like the part #RMK94PR. I wish there was a no-drill option but it's just not available on your vehicle as it doesn't have any brackets made for steps.

Hey Gary, welcome back! The Ventline Roof Vent item #V2128SP-01 is our only option for a 120v roof vent. It will work great with the AC power you have currently in your trailer. The Ventline item #V2128SP-01 has a manual lift that can be opened by…

Hey Alfonso! The offset is 0 on the Kenda Karrier KR35 ST175/80R13 LRC Radial Trailer Tire w/ 13" Aluminum AM03 Wheel #KE22XJ. An offset of 0 is the standard for almost all trailer wheels. Are you looking for an offset or just confirming before…

Thanks for the picture Don! I do not have anything that connects to that 10-pin so I am hoping you're just at the wrong connector. I have linked a picture below along with an installation video that will show you what the Hopkins item #31345…

Hey Richard. The EcoHitch Hidden Front Hitch item #EH79CR will definitely support a 542 lbs motorcycle. It has a 1,000 lbs total capacity no matter how you use it. Unless you have the lightest motorcycle carrier ever, it's not going to work with…

Hey Jay! To clear maintain access to the rear doors on your ProMaster you will need a swing away cargo carrier. I have two options for you. The first is to use a traditional cargo carrier like #C18152 (or #C63ZJ with cage) and an adapter like the…

The EXT version of the 2017 Ford Transit T250 with a 148" wheel base has a sliding passenger door. If you have a sliding passenger door then you will want to use the VanTred Custom Floor Mat for Cargo Vans part #VTFT15LE. If you do not have the…

You are correct. Both of the VanTred Custom Floor Mat for Cargo Vans - Black - Thermoplastic, long wheelbase, w/o extended body, part #VTFT15L long wheelbase, with extended body, part #VTFT15LE, will install underneath the OEM shrouds from the…

Thank you for the photos, that really helps! It looks like you're needing the 1-diode 2-1/2" round lights from Optronics; Red #MCL0040RBB and Amber #MCL0040ABB. The lens looks to be the same design and the bases have the same mounting design…

I tried it to make sure, and the t-bolt #853-0782 will fit inside the groove on the top of the Thule AeroBlade bars. The knob #753-0776 will also fit on the bolt. I have attached some pictures of the bolt in the groove with the knob on the bolt for…

First of all, that's an awesome off-road trailer, thanks for the photo. As for the 60" Thule Roof Mounted Top Rack System #THTB60, it has tracks which we have measured before and found the inner track to be 0.8" wide and the top opening…

It looks like you have the Thule Aeroblade bar. The T-slot dimensions are 1/2 inch wide for the top of the opening and 3/4 inch wide at the bottom. The T-slot is 1/8" inch tall.