Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…
Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…
Hi Davis, Yes, you potentially could do that, but there are a couple important things to keep in mind. The Watchdog Power Center part #HU74ZR is designed as a portable unit that normally sits upright at the pedestal, and Hughes recommends keeping it…
Brian, you’ll each want the version that matches your RV’s service. The #HU84ZR is built for 30A rigs like your friend’s Cougar, while the #HU74ZR is made for 50A rigs like your Cedar Creek. They both do the same job - voltage boosting, surge…
Hey Daryl, I took a look at that PoleStar jack you mentioned and it looks like it has 2" diameter tubing. A good replacement jack foot for that jack will be the #LC165253. Designed to fit 3,500lb jacks with 2" tubing this will be a solid…
If the bike rack initially comes with a threaded hitch pin like the Malone #MPG2149 or the Curt #C18085 then a locking hitch pin like part #C23519 that you referenced won't actually fit. I do have some alternatives though that you can check out.…
Hey Dennis! The Acadia and Traverse do share a lot, but the coil springs are different which means the #AL99PD will not fit your 2025 Traverse High Country. You may be able to use the universal springs like #AL60909 but you will need to measure to…
For your Kuat Beta bike rack #B202-2 the easiest solution to lock the bikes to the rack and to the hitch is to use a cable lock such as #e98891. Run the cable through the bikes and the safety chain loops on the trailer hitch to deter theft. I have…
Good thinking, Andy - good name btw. The Watchdog Surge Protector / Voltage Booster 50A #HU74ZR is a hefty unit, but it does sit outside at the pedestal, so security matters. It has a metal loop built in for a padlock or cable lock, which you can run…
Hey Ethel, thanks for reaching out. No, I wouldn't recommend the Valterra StayPut Curved Leveler and Chock #VAL48MB if your tandem tires are only 4" apart. The wedges on the StayPut system need enough room to fit between the tires and create…
Hi Heidi, I did some searching and the smallest kit I could find is the Valterra StayPut Curved Leveler and Chock for Tandem Axles part #VAL48MB. The wheel chocks are 7" long x 5 3/4" wide x 5" tall and can give your trailer up to a 4…
The wheels are hub-centric. The wheel bolts instead of lug nuts is the only clue needed. A hub-centric wheel centers on the hub using the pilot hole and hub so it would be a snug fit. You could still use a lug-centric wheel as long as the pilot hole…
Get dependable, no-fuss security for your roof-mounted gear. These cable locks work with Rhino Rack crossbars and platforms to help secure kayaks, ladders, and more. Lock cores are not interchangeable with Thule, so plan keys accordingly.
No, Rhino Rack cable lock cores are not interchangeable with Thule cores. Even if the locks look similar, they won't swap. If you want one key system, keep lock cores within the same brand. Before buying, confirm the lock core family matches your existing gear.
No, mixing different brands' channel hardware can be incompatible. Instead of trying to fit non-matching channel pieces, use a Rhino Rack cable lock to add security. Wrap around the rack structure and vehicle side rails when possible. Verify clearance so the cable doesn't interfere with doors or hatches.
Use a Rhino Rack cable lock as a deterrent by wrapping it around the rack and the vehicle's side rails. Choose solid tie points on the rack frame, not only accessories. Keep the cable tight to reduce movement. Confirm the cable path won't pinch or rub sharp edges.
Yes, a Rhino Rack cable lock can help secure the kayak to the platform. Route the cable through solid anchor points on the platform and the kayak. Check that you have enough wrap length for your setup. Avoid relying on crossbar channels; use through-wraps around strong points.
Filters
Cable Locks Parts or Accessories
