...I need a winter cover for my Mercury 150xl outboard motor. I cannot determine which grey Taylor Made Outboard Motor Cover is the correct size for my motor. Can you help with the size I need...
Since your rescue boat trailer is 188 inches (15 feet 8-inches) tongue to tail and 89-1/2 inches (7-1/2 feet) width I recommend the following: I recommend Optronics right side LED trailer light #STL26RB and left side LED trailer light #STL27RB. They…
I attached a picture I got from Pace that covers exactly what the maintenance looks like for the Pace Switchblade tonneau covers like part #311-SWFA06A29 that you asked about.
If you know the brand and weight capacity of your axle, we should be able to figure out what bearings it uses and what hubs are compatible. If you do not have that information, the next best option is to use the bearing part numbers and the weight…
The P-15 model information you provided for your Dexter axle does indicate its model, but you will still need to note its length and capacity before locating the correct replacement. If you are able to find a longer serial number somewhere on the…
I contacted the manufacturer with the information you provided about your axle. They were able to confirm that you have a Dexter #10 Torflex axle on your Wells Cargo Trailer. The correct lift kit for a Dexter #10 Torflex axle is the Torflex Lift Kit…
I spoke with my rep at Dexter axle and was informed your axle has a 3,500 lbs weight capacity, with a 58" spring center, and a 72" hub face. A comparable replacement is the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72"…
The closest axle we have to what you need is the part #20440I-EZ-60 which has very similar specs as what you need, but the spring center is off by one inch as it is 48 inches on this axle. The overall capacity is 2,000 lbs and the hub face to hub…
It looks like you have the CE Smith boat bunks part #CE27600 in the picture you sent in so then for replacement upright brackets you'd want the #CE27609PG and you'd be set.
Hello JT, thanks for reaching out. You are on the right track with your drawing. The etrailer Single Axle Trailer Fender #HP33RR are designed to be bolted on from the top of the step onto a bracket. These specific etrailer brand fenders are a new…
Hello Doug, it sounds like you are on the right track, because the OptiMate Solar Duo Portable Solar Panel with Controller #MA56JR will work great for keeping your AGM battery charged while the trailer is in storage. Like you said it is not the…
What I think you are asking is how to determine the minimum amount of energy, by way of solar panels, that you need to have available to put back in to your battery. If your goal is to simply maintain the battery while the RV is in storage unable to…
...I need a winter cover for my Mercury 150xl outboard motor. I cannot determine which grey Taylor Made Outboard Motor Cover is the correct size for my motor. Can you help with the size I need...
Since your rescue boat trailer is 188 inches (15 feet 8-inches) tongue to tail and 89-1/2 inches (7-1/2 feet) width I recommend the following: I recommend Optronics right side LED trailer light #STL26RB and left side LED trailer light #STL27RB. They…
I attached a picture I got from Pace that covers exactly what the maintenance looks like for the Pace Switchblade tonneau covers like part #311-SWFA06A29 that you asked about.
If you know the brand and weight capacity of your axle, we should be able to figure out what bearings it uses and what hubs are compatible. If you do not have that information, the next best option is to use the bearing part numbers and the weight…
The P-15 model information you provided for your Dexter axle does indicate its model, but you will still need to note its length and capacity before locating the correct replacement. If you are able to find a longer serial number somewhere on the…
I contacted the manufacturer with the information you provided about your axle. They were able to confirm that you have a Dexter #10 Torflex axle on your Wells Cargo Trailer. The correct lift kit for a Dexter #10 Torflex axle is the Torflex Lift Kit…
I spoke with my rep at Dexter axle and was informed your axle has a 3,500 lbs weight capacity, with a 58" spring center, and a 72" hub face. A comparable replacement is the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72"…
The closest axle we have to what you need is the part #20440I-EZ-60 which has very similar specs as what you need, but the spring center is off by one inch as it is 48 inches on this axle. The overall capacity is 2,000 lbs and the hub face to hub…
It looks like you have the CE Smith boat bunks part #CE27600 in the picture you sent in so then for replacement upright brackets you'd want the #CE27609PG and you'd be set.
Hello JT, thanks for reaching out. You are on the right track with your drawing. The etrailer Single Axle Trailer Fender #HP33RR are designed to be bolted on from the top of the step onto a bracket. These specific etrailer brand fenders are a new…
Hello Doug, it sounds like you are on the right track, because the OptiMate Solar Duo Portable Solar Panel with Controller #MA56JR will work great for keeping your AGM battery charged while the trailer is in storage. Like you said it is not the…
What I think you are asking is how to determine the minimum amount of energy, by way of solar panels, that you need to have available to put back in to your battery. If your goal is to simply maintain the battery while the RV is in storage unable to…
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Taylor Made Boat Motor Accessories: Reliable Protection
Taylor Made offers robust solutions for protecting your boat cover from trolling motor props. Their heavy-duty rubber prop protectors are designed to last, ensuring your boat cover remains intact and your sailing experience is safe and hassle-free.
Taylor Made's prop protector is crafted from heavy-duty rubber, providing a durable shield against potential tears from trolling motor props. This design ensures your boat cover remains intact, offering peace of mind during your boating adventures.
Unlike makeshift solutions like towels and bungee cords, Taylor Made's prop protector offers a secure fit and robust protection. Its design prevents accidental cuts to sail lines and ensures safety for those boarding at the stern, making it a superior choice.
The prop protector's heavy rubber construction is built to withstand the rigors of boating. Unlike previous lightweight plastic models, this design stays securely in place, even during trips to the lake, ensuring longevity and reliable performance.
Taylor Made's prop protector is designed for a good fit across various motor types, ensuring versatility and ease of use. Its well-made construction aligns with the specifications, providing a snug fit that enhances protection for your boat cover.
Using Taylor Made's prop protector on a sailboat tender prevents the motor from cutting sail lines or causing injuries. It offers a much more efficient and safer solution compared to wrapping the motor with towels, ensuring a smooth and worry-free sailing experience.
Filters
