Backup Camera - BringIt Tailgates

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

Hi Bob! We have you covered for both. For the base plate, I recommend the Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM77GR. They make the best base plate in the industry and are the ones to get. That said, do you already have tow…

Hello again Frank; tongue weight is typically 10-15% of your trailer weight. At 5,400 lbs you could go over the max 800 lb tongue weight of the #FA94-00-0800 but that probably isn't the case here. If you really want to be sure you could always…

Hey Alfredo! Great question. The Furrion Vision S+ Wireless RV Observation System #FR57AD, #FR74AD, and #FR64AD are all capable of recording. The 7" monitor has a micro-SD card slot (must be at least Class 10) and supports cards up to 128GB.…

Hey Tim! You can replace the old Furrion AC on your Grand Design with the Furrion Chill HE Low-Profile AC. However, the old one is an R410A unit and this is an R32 unit. Everything has switched to R32 due to the 2025 EPA regulations. This means you…

Hey Darrel. The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks item #RM-2460-2580 is without a doubt the best upgrade you can make to your Grand Design's suspension system. It's going to come with everything you need to swap out…

Hey Tom, It looks like the smallest size monitor we carry is going to be the Replacement 4.3" Monitor #FR77FR for your Furrion S+ system. I do not see the 3.5" monitor that you mentioned that we carry. If you are wanting to stick with that…

Hey Butch, on the B and W Continuum Weight Distribution System part #BW94BR the distance from the center of the hitch pin hole to the center of the hitch ball is 11-3/8 inches. Is that enough clearance for you?

Hey James, the best diamond pattern snow chain we have that fits your tire size of 285/70R17 would be the Konig part #KON44FR if you wanted the easiest install, the best traction and the longest life from the set. If you wanted a lower priced option…

Hey Jim, we had a customer of ours with a similar Kia Sorento SX to yours let us know that the Curt harness part #C63RV did fit so it would work great for your 2021 model. Do you have a hitch already?

Hey Michael, we have a version of the B and W Continuum that fits 2.5 inch hitches with the part #BW53FR but we do not have a very version for this hitch size that has an extended length shank. Do you need the added length shank?

Yes, it will Mark. Your upgraded OEM head unit is the same one used in the instruction manual for the Brandmotion SummitView Backup CMOS Camera for Custom Display item #BM35FR. I have linked these instructions below so you can see how to get this…