Hey Jacob, thanks for reaching out. The Westin Custom Fit Truck Bed Mat #50-6405 weighs approximately 45 lbs. It'll fit the 2017-2026 Ford F-250 and F-350 with the 6-3/4' bed. What do you usually haul in your truck bed?
Hey Travis, welcome back! Yes the DeeZee bed mat part #DZ28GJ that you referenced can install over a factory spray in bed liner. Are you trying to keep the spray in bed liner as nice as possible and thats why you want a mat?
Hello Dennis, That is definitely something you will want to check with your setup. The B&W Continuum #BW78FR will sit about 9 inches below your trailer frame once installed, so you will want to measure from the ground to the bottom of the frame…
The Timbren #TTRA1032 is a great help to a trailer. For your small trailer you will want the Timbren Trailer Suspension Enhancement System Light-Duty Trailers 1,000 lbs #TTRA1702. It sounds like this is exactly what you are seeking.
I would recommend to use the Timbren Trailer Suspension Enhancement System , part #TTRA1032, on your 3,000-lb utility trailer. This enhancement system is for medium-duty trailers. It has a weight capacity of 7,000 lbs. This does not mean that you…
The Timbren Trailer Suspension Enhancement System, part #TTRA1702 is designed for light duty trailers. This system has a weight capacity of 1,000 lbs. You do not want to exceed the trailers weight carrying capacity. Also, this system is for trailers…
Hey MT! We do have the 9002-7468 just under our part number. What you need is the Brandmotion Tailgate Delete Backup Camera with Wiring Harness - License Plate Mount - Custom Fit #BM67JR. This will allow you to retain the backup camera on your 2022…
Hello Matt, Thanks for writing in! I'm glad you found us. We did originally have the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118784 listed as a fit for the 2025 Hyundai Santa Cruz. However, we had to remove it from our…
Hey Tom, I just checked with Blue Ox and they do not list their bulb and socket kit part #BX88267 as a fit for your 2026 Ford Maverick so there isn't any information on how or where it would need to be located in the housing if you were to try…
Hey Jeff, welcome back! The Equal-i-zer Weight Dist Shank item #FA88FR has the standard 1-1/4" bolt hole spacing. The holes are 3/4" in diameter. This shank is compatible with almost every weight distribution system on the market with the…
Hey Terry, the etrailer hitch #e59ZV and the TowSmart hitch part #TS33ZR are both really great options for your 2023 Hyundai Santa Cruz that I would pick whichever was priced better and you'll have a really great hitch. Are you planning on doing…
You don't need a rail adapter. To attach the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider item #DM8550035 to your 2023 Ford F-350's puck system you will need the Underbed Mount Adapter Plates item #DM6033. I have attached a picture below…
