Best GMC Sierra 2500 Trailer Hitch Ball Mounts

About a year ago, I bought a new to me truck that needed a 2.5" hitch. I love this 3 in 1 setup. I really like that it stows and I can always have it back there. I haven't used the 1 7/8" yet, but there are plenty of old trailers out there that would need it at some point. I have used the 2" & 2 5/16" plenty. It's sturdy, looks good, and is super convenient, what's not to like about it.

Why did I wait so long to buy this awesome hitch! (I guess because i had my doubts, given the cost). This has been so useful as I have 4 bumper pull trailers with 3 sizes of balls. I dont move them all the time, but when i do use them, i often find myself using more than one in a day. I told my neighbor about my experience and he bought one for each of his trucks. It is SO easy to change the size...like 10-15 seconds

Went with the B&W due to the length of the shaft going into the receiver. My 2024 Ram's receiver is recessed under the bumper. This hitch is long enough to accept my Towtector product. Similar to Rock Tamers. Also, Brittany in customer service was awesome to work with as she guided me towards the product that worked for my application.

This ball mount is extremely heavy duty. I had a stock class IV hitch and aftermarket ball mount on my Ram 3500 SRW and it was bending towing a 14000 lb dump trailer. I upgraded to a class V hitch and this mount and it's working great. I have 6 trailers that I pull with gooseneck, 5th wheel and ball hitches. The only 1 that uses 1 7/8" ball is a little 5x8 utility trailer that I'm converting to 2" so I got the 2 ball instead of the 3. When turned sideways it works as a step to get into the truck but only if the tailgate is up. It doesn't stick out far enough when the tailgate is open. The reason for 1 less star is the documentation; you need more information to make the best choice. I originally ordered a different PN and it hung way too low bc is mounted under the existing hitch. To remove the stock hitch, you also remove the integrated mounting brackets for the bumper. I ordered a PN for a truck without a hitch and cut off the receiver tube with a torch. Also, I upgraded the 3 1/2" exhaust to 4" and now at idle the exhaust rattles on the much larger frame of the class V but a slight modification in planned to take care of that. Installation was fairly straighforward once I removed the original receiver tube.

Great product. Extremely well built and looks great. Very easy to put into stow mode and move it back to the positions you want to tow from. The rated capacity of it is great it’ll do everything your truck will do in a bumper pull mode. It is a must for a 19 F-250 with the ride height to get your load level and to make the connection a easier process.

Great service, came quickly, works perfect on our truck for hauling trailers and various loads.

Awesome hitch, love that I don’t have to worry about my multipro tailgate getting a dent in it…expensive but worth every penny for peace of mind!!

Great quality drop hitch, works great with my multipro tailgate! Quality product/tight tolerances, there is hardly any rattling which is amazing. Towed an 18 ft cargo trailer 500+ miles through the VA mountains with no issues. Worth every penny so far!

This forged ball mount was not machined flat around mounting hole. I had to grind a flat surface for proper fit.

Excellent product great performance have putting it to work towing 10k no problem love it

Hitch ball and mounts all ready to the test!!! Great Products!! Five Star e-trailer team, very informative, fast and accurate shipping, perfect packaging and "GREAT" customer service"

This review does not just serve my recent order, but all of the orders before it. I have purchased a number of items from etrailer and everything was sent in a timely manor as stated and promised. All of the items I received were exactly as described. I watched a number of videos, read a number of diagrams and all of the help information was exactly what I needed. In other words I did not need to go anywhere else to get a full tow package for a Dodge 5500 that did not have one. I cannot say enough about how this website helped me. Also the pricing was about the best I could find and I did a lot of searching to make sure. This is a top notch site and I will absolutely come back here for my future towing needs.

Well packaged, arrived quickly and fit like a glove! If you have the split tailgate from GMC, this is the hitch to buy.

Very nice ball mount, heavy duty, purchased for use on my new GMC 3500 Denali, with the balls stowed behind the mount no issue using the multi pro tailgate. I purchased a XL Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Hitches - 3-1/2" Span ITEM # SHP2040-XL for use with this, I really like that too as it stops any rattles and also locks the ball mount to the truck. I also purchased a B&W draw bar mount for use with a clevis trailer, this fits very nice and stores with the balls on the back side of the mount. Highly recommend this set up. Great service from E Trailer.

Nice hitch very adjustable use it to to pull Diamond C 208 lpx trailer with a kubota SVL 90-2 skid steer close to 16000 lb

It's great having the hitch always attached to the truck. It's just there when you want it, stowed and out of the way when you don't. I wish they had a one-ball version as I haven't needed both, yet.

I've used the hitch over the last year on several trailers and loads. The adjustability made towing a much better feel and ride over a fixed hitch that at times not the greatest. I see no wear, very easy to adjust even once coupled to the trailer and finding the trailer needs to be leveled better.

Works flawlessly. I was very excited the day I got home and my Rapid hitch was on the front porch. It came in nice box and was packaged very well. I opened it up and unpacked my rapid hitch and I was very impressed with the quality and precision of this hitch. All of the machining was PERFECT and everything fit together right. I put it in my truck right away. Going down the road with the trailer on and off there is absolutely no rattles, clunks, or jolts. I also love how everything is aluminum or stainless steel, NO RUST. I wish I could've gotten the greaseless model but my boat is too heavy. My only complaint is that it doesn't come with locking pins. With a hitch this expensive I really wish it came with them. Do yourself a favor and order them with your rapid hitch so you don't have to pay for shipping in the future. Other than that great product and I believe it will outlast me.

The 5” B&W has worked great for me. This year I’ve towed an 18 foot speed boat, a 21 foot family boat, and a travel trailer. Used 3 different heights on hitch to accommodate each trailer, including the larger ball for the travel trailer. When all done, I use the stow feature too. No more hitting shins on the hitch! Quality unit, very happy with its versatility and solid craftsmanship.

Great heavy dury hitch for towing. Less noise than other hitches and does a great job pulling my boat. Love the easy adjusting to height based on terrain where you may need to change this. Worth every dollar and likely a hitch for life.

you did a great job sending out the hitch that we ordered and ups saw that we got it. Thanks so much for the time and effort you put into this order.

Great service

Super hitch. Best money spent for towing so far. Prompt shipping and a pleasure to buy from this vendor! Thrilled with my experience and will look here for all my trailer and towing needs.

Love these hitches. This is my second one. Honestly, it will save you money. One month a few years ago, I spent $300 on hitches because I would forget or did not have the right height, ball, etc. finally bought a b/w and never had a problem again. I bought this one because I got a new truck with 2" receiver. Great quality, simple, reliable.

My third one of these, I feel they help take shock out of towing. Just bought a extra one instead of changing balls all the time.

I own a couple of these in different drops and really prefer them over solid mounts. The cushioning does help protect the driveline of the tow vehicle and removes the harshness sometimes related to towing a trailer. Not cheap but well worth it to me.

It now makes it so I can pull anything except a 5th wheel. It will make it great on the ranch.

This is a heavy duty combo pintle / ball mount. It is replacing one that failed at the welds. Since this is a solid piece with no welds I expect many years of use.

The chrome trailer hitch I ordered initially seemed promising, but Even with diligent care, including not leaving it on when not in use and avoiding exposure to winter weather, the chrome trailer hitch still succumbed to rust. This unexpected deterioration highlights a significant flaw in its durability, leaving me disappointed in its overall performance.

I recently purchased a B&W a 7" Drop, Trip Ball Hitch from the factory. I ordered a 3" Reese instead of a 2 1/2" that I needed. Noah and Tammi in Customer Service jumped right on the issue and got me the correct hitch and a quick return/credit for the other one. Couldn't be more happy with the company and the hitch. B&W makes a bullet proof hitch and I will always recommend them. Thank you for all the help, David.

Just received this mount and did the test fit with our trailer. We have not hit the road with it yet but I am confident it will perform perfectly. I am anxious to see how the cushioned feature works. We pull a box cargo trailer for business and just got a new Chevy HD pickup to tow with. It has a 2.5" receiver and hitch height is much greater than the Suburban we were using plus it had a 2" receiver. This mount is rated for far more weight than we will ever need but it was the only 2.5" size with 6" drop that I could find. We are very pleased with the product and the excellent customer service we got at etrailer. Thanks to everyone there for the very fast service and for keeping me informed as to the status of my order. well done!

These hitches are the best! And I scanned the world over to find only hitches that are made in USA like I do every product I buy. This is a very ingenious design that allows some shock absorption that greatly quiets any trailering. I bought two full hitches one for each ball size so that I would never have to change ball again! Great product!

Allows quick adjustment for my assorted trailers. No problems. I recommend.

Very happy with the hitch. Looked FOREVER all over for details when I got my new to me 2017 Ram 2500. This truck sits so dang high off the ground (4x4) I was worried about getting the proper range of drop for my different trailers. I used my 7x14 utility trailer as my baseline as it rides the lowest. From ground to bottom of my ball coupler is approx 16in. From ground to top of my hitch receiver is approx 25in. On the lowest setting my trailer sits ever so slightly nose totally empty. Check the pic with level. Once loaded I'm confident it will ride very nice. Plus I have all the range to move up for my taller trailers. Super beefy, seems well built, and I picked up the locking pins to go with. Etrailer as always had a great price and I've been ordering from them for years.

Solid heavy-duty product - exactly what I expected from a respected US manufacturer. Easy ordering process from etrailer, Lauren in CS was helpful. Video reviews also helped guide my purchase. This was my first order, will be back for more.

This hitch is easy to adjust to fit different trailer heights so I can keep them pulling level without having to buy different drop hitches. It holds up great under heavy loads I pull a tractor and a 3 axel trailer with no worries of a hitch failure. Thanks B&W for making a great hitch

seems to be well built, haven't used it yet. Thought I would be pulling a pontoon trailer, but it fell through and have never used the tow and stow ball mount.

Using this hitch on my Expedition and LandCruiser. A standard hitch caused my 12 ft utility trailer to not ride level when towed behind either truck. Since my trucks have different ride heights, the B&W hitch allows me to get the perfect drop for each truck. Trailer responds much better to road issues level as opposed to angled behind the truck. Additionally, its rating exceeds both of the trucks’ towing capabilities, so I have the hitch I need for the future as I have plans for a heavier trailer down the road. Quality and fitment of the hitch is excellent.

Unit was well packaged and fit and finish was perfect. Look forward to using it for many years! I have turnover ball in bed of my truck that’s at least 15 yrs old works perfect! B&W make the best towing products! Also have companion fifth wheel! Can’t say enough! I will always use B&W

Got mine today looks very heavy duty and built well!