In-stock alternatives that are ready to ship
Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 14,500 lbs with the 2-5/16" ball.
Features:
Specs:
The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having a 1-7/8" ball, a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers.
To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top. Then replace the pin to secure the block in place.
Adjusting the height of the ball is just as easy. Remove the pins holding the ball mount platform in place and slide the platform up or down along the shank to the desired position. Once you have found the correct height, reinsert the pins and replace the clips.
When you're not towing, you can flip the ball mount platform around and stow it beneath your hitch so that you won't bang your shins. Just remove the pins to slide the ball platform down along the channel and up the back side so that the hitch balls face towards your vehicle. Then replace the pins.
The Tow & Stow ball mount features a channel that runs along both sides of the shank. This channel not only allows you to slide the ball mount platform up and down to adjust the ball height, but it also prevents removal of the platform when the ball mount is installed, which will help prevent theft of your trailer.
A slot is cut into the adjustment channel near the top of the shank. To remove the ball mount platform from the shank you will need to remove the entire ball mount from your hitch. Then remove the pins that hold the platform in place. Flip the platform around to the stowed position on the rear of the shank, and then slide it up until the center pin lines up with the slot in the shank. Pull the platform out towards the rear of the shank until the pin pops out of the adjustment channel.
When the Tow & Stow is secured in your hitch receiver, you will not be able to remove the ball mount platform. This is because the slot in the shank is positioned in such a way that the collar on your hitch will block the pin on the platform from being able to leave the channel. Even if the pins holding the ball mount platform in place are removed, the platform will still be confined to this channel. So, as long as a hitch lock is used to secure the entire ball mount in your hitch receiver, and a coupler lock is used to prevent your trailer's coupler from being disengaged from the ball, your trailer will be secure.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the B&W Tow & Stow 3-Ball Mount. Now this ball mount is designed to fit into a two and a half inch by two and a half inch trailer hitch receiver. It offers a maximum gross towing weight capacity of 14,500 pounds and a maximum tongue weight capacity of 1,450 pounds. As you can see, the ball mount offers adjustability and a multi-ball design, so it has the built-in hitch balls, which let you hook up to your trailer from the tow vehicle, so the shank slides into the receiver tube of your hitch on the vehicle, and then the hitch balls provide the connection point for your trailer's coupler.It also features a stowable design, so one of the most awkward things about having a ball mount installed at the back of the vehicle is when you don't have your trailer connected to the hitch balls. You have this whole platform area sticking out. Somebody can easily run into or another vehicle could hit and cause some damage, so what B&W did is they actually created a stowable design, which lets you store the ball and the mounting platform on the reverse side of the shank, which should actually be underneath the hitch of the vehicle.In order to move it to a stowed position, all you have to do is pull out two pins and two clips.
Then this actually swivels, so you can rotate it up. It flips on the backside here, and then you can stow it in this position by reinstalling the pins and clips. It's a really neat design. It also adds a very clean, finished look at the back of your vehicle whenever you're not connected to a trailer. Also, since I have the pins and clips removed, I do want to show you ...
This is exactly how you would make your adjustments as well, so the adjustable height design lets you tow trailers of different heights using the same vehicle. That's going to help ensure that the ball height is as level as possible with the trailer's coupler height. These holes along the shank are separated on the center by one and three eighths of an inch, so that's your incremental height adjustment.Once you find the height that you need for your application, line up the pinholes and secure the platform in place with the included pins and clips. Now you can use this in either the drop or rise position. If you're using it in the rise position, your maximum rise is seven and a half inches.
In the drop position with it at the lowest setting, maximum drop is seven inches. That measurement is taken from the inside top edge of the receiver tube of your hitch to the top of the ball platform, which will be right here at the base of the actual hitch ball. When you're ready to switch between the differently sized hitch balls, all you have to do, again it's really simple, pull out another pin and clip. You can take this and you can rotate it to whatever hitch ball you need to use for your towing application, so you have a one and seven eighth inch ball, a two inch ball, and a two and five sixteenth inch ball to choose from.Then once you have the ball pick you need, secure it in that position by reinstalling your pin and clip. Now when it comes to the construction, we're looking at a very durable steel construction with dual process chrome plating.
Gives a really nice look. It's also rust and corrosion resistant. The stainless steel pins create sturdy, rust-proof connections. To secure this inside your hitch, you will need a hitch pin and clip or a hitch lock. That is sold separately, and if you do need one, you can check out some options here at etrailer.com. The pinholes on this unit will accept a standard five eighth inch diameter pin.A few measurements I want to go over with you real quick. I took a measurement of the distance from the center of each pinhole to the center of the hitch balls. The closest one, center on center, was nine and one quarter inches at a straight line measurement. Then this one to the center of the hitch balls was 10 and three eighths inches. When you're using the one and seven eighth inch ball, your gross towing weight is 3,500 pounds. When you're using the two inch ball, it's 7,500 pounds, and when you're using the two and five 16th inch ball, it's 14,500 pounds.The product is made in the USA and covered with a limited lifetime warranty. That's going to do it for today's look at the B&W Tow & Stow 3-Ball Mount for two and a half inch hitches.
Average Customer Rating: 4.9 out of 5 stars (101 Customer Reviews)
Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 14,500 lbs with the 2-5/16" ball.WOW! I love the heavy duty construction of this hitch and its versatility. I can’t see ever needing another hitch after this one. The clean looks are the icing on top. Definitely a lot of value for the investment. 467503
You're not going to find a better looking hitch on the market. Adjusts with ease as described. Tow and stow feature is a must have. Fast shipping. 704061
Ordered the 7" drop and it was perfect height for my 2019 F350 4 x 4. Really like it when it's stowed and you don't have to worry about your shins! Super fast shipping and great price from etrailer.com. 590269
Very heavy duty, excellent quality and looks great on my truck 895046
great product and easy to use 884309
Still looks good The BW label is pealing bad. But its strong and easy to change out and reposition to hide. I would recommend this item to all of my buddies. 817993
Great product! Fast shipping! Excellent customer service! 815524
Great service and fast delivery 808355
I recently purchased a B&W a 7" Drop, Trip Ball Hitch from the factory. I ordered a 3" Reese instead of a 2 1/2" that I needed. Noah and Tammi in Customer Service jumped right on the issue and got me the correct hitch and a quick return/credit for the other one. Couldn't be more happy with the company and the hitch. B&W makes a bullet proof hitch and I will always recommend them. Thank you for all the help, David. 789909
Heavy duty and well made, but I've already had a couple of hitch pin keepers stolen. Once while parked in front of my trailer at a campground and another while in a grocery store parking lot. I contacted the manufacturer and they sent me a couple for free. Great service, but definitely something to consider if you're planning to leave the hitch on your truck for any extended period of time (doesn't keep honest people honest). The actual hitch itself works flawlessly and I added two B&W hitch silencer pads to account for some of the hitch receiver play on my 2018 RAM 2500HD. 782111
Etrailer is the one stop shop for anything trailer! Quick, easy, and very helpful. 765678
Amazing product we use on all our Company Trucks! 758667
Great product! Everything I needed. 708370
Good solid quality products !!!, and even better.... Made in USA 657634
Quick shipment/arrival. Fits my Ram 2500 perfectly and love the fact that it can't get stolen. I wasn't really thinking about the hideaway feature (flipping the balls around) when I purchased it, but it's a nice plus! 614033
Love how easy it is to adjust. I pull multiple trailers at different heights and this adjust quickly without tools. 608259
Great product . Only hitch I will ever but again . Adjusting is a breeze . 607680
Truly an excellent product -- American made! Quality is outstanding and I absolutely believe the statement printed on sturdy box it came in: "The last hitch you will ever need." The craftsmanship is actually a thing of beauty. Stow and Go and triple ball is perfect for our boat transport service. Superlative!! 590325
Great product!! Installed on 2017 F250. Pins and slides are smooth. No rattling. The hitch sits close in to the receiver making trailer wiring long enough to connect to vehicle. Also made in the USA. 494638
Review from a similar Chrome Tow and Stow in Trailer Hitch Ball Mount
See review on the hitch itself. Great product. 727367
Review from a similar Chrome Tow and Stow in Trailer Hitch Ball Mount
Great look and usefulness. However, didn't work on my car because it was too low and scraped when I exited my driveway. I have a Mercedes GLS and never thought of it. My fault. 435991
Review from a similar Chrome Tow and Stow in Trailer Hitch Ball Mount
For once I got what I paid for!!!!!!! 471373
Review from a similar Chrome Tow and Stow in Trailer Hitch Ball Mount
Just as advertised, fits perfect and looks great. 352793
Review from a similar Chrome Tow and Stow in Trailer Hitch Ball Mount
Awesome should be great service 324585
Review from a similar Chrome Tow and Stow in Trailer Hitch Ball Mount
Very heavy duty. Fast delivery. Was a little more expensive but we'll worth the price and made in the U.S.A! 545037
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.