# 1
Rhino-Rack Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards
E trailer I have a 2019 Mazda6 and purchased the rhino rack series 2500 parts (fit kit #DK289, foot pack #RRRLKVA, aero crossbars#RRVA126B-2), and the rhino rack snowboard/ski carrier #RR576. My car does have fixed mounting points underneath the strip on the roof so I opted to add them to my roof and not use the clamp for kit that goes in the door jam. Every time I entered the year, make, and model of my car, the parts came up with the clamp fit kit part #DK387 which I did not want. But after some research, I found the correct fixed mounting point fit kit. The site of course told me that this part wouldn’t fit my car but after looking at the customer reviews, I saw them used on Mazdas. All of the rhino rack instructions were not the best. We did have to make some adjustments. One of the instruction packs tells you how long you’re supposed to cut the rubber pieces that go into the crossbars based on your car but unfortunately, the measurements were wrong for my car (picture- front 166mm is wrong). The front bar length was about an inch too short and I had to add more rubber to make it longer to fit the fixed mounting points on my roof. After some time of trying to interpret the instructions, and looking up whatever available instructional videos were online, we finally finished installing them and they do look really nice. At higher speeds on the highway I can definitely hear more noise. The actual snowboard carrier is fine, fits all 4 boards fine. It is a little difficult to close once I have my boards in there because you have to push the top bar all the way down and hold it down to be able to turn the key to lock it. I’m just happy I don’t have to shove the boards in my trunk. I do like that all the parts in this series come with locks and keys. So far no problems. Overall good product.
This rack works great with the four pairs of skis I lugged from Oregon to Alaska. I'm using it on the beef rack cross bars that came with my go fast camper which are very difficult to find mountings for. This one worked great though with a little bit of metal grinding on the bolts that slide into the t-slot of the rack. It locks and unlocks fairly easily (with a little bit of jangling involved), but so far so good!
# 2
Rhino-Rack Ski and Snowboard Carrier - Locking - 3 Pairs of Skis or 2 Boards
I think these racks will be excellent during ski outings for many years. I attached them directly to the C-grooves on my Aero bars rather than using the provided clamps. The C-groove attachment is stronger and slightly lower profile. I love the large release buttons!.
I can't ski, I fly fish. However my oldest decided to try downhill skiing after being gifted a pair of skis. I am budget minded should the skiing not work out and after breaking many rod tips decided this might solve 2 problem. I am very pleased w/this equipment holder. It has transported skis & ski poles too and from and no longer does my oldest have to dodge skies coming over the back seat. So far it has taken abuse from the rain (& freezing rain), snow, ice, rapid warming, road salt, and upwards of 70mph and there has been no shifting, loosening, breaking of plastic or any other noticeable problems. I am excited for spring to see how it transports my fly rods.
# 3
Yakima FatCat EVO 6 Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards - Black
Just got my Yakima Fatcat EVO 6 ski carrier (black finish) and I am stoked. Note that this is different than the Fatcat 6 (non-EVO, previous generation) carrier. This is my first ski carrier, but I and/or my kids ski about once a week at Alta and Snowbird when the lifts are running, so I expect it to get lots of use. Etrailer shipping was fast and item was packed in a sturdy secondary box. PROS: 1. I love the sturdy build and quality finish of the carrier. 2. The design allows many micro-adjustments to fit to your vehicle and to fit the skis. For instance the spring-loaded hinge on one end and the lock on the other end can naturally accommodate different thickness skis. 3. Carrier has a usable width (i.e. width of skis side by side) of 32.75 inches (832 mm). For those that are not skiing on 75-mm-wide skis from 30 years ago, this carrier might actually allow you to fit 6 pairs! 4. Separate mounting brackets for aero or for square/circle cross bars. The aero brackets fit securely on my Acura/Honda OEM cross bars. The flat part of your skis will be about 3 inches (76 mm) above your cross bars. 5. A built-in lift bracket that lifts by an additional 3 inches (76 mm) the hinged end of the carrier, if you have really tall bindings (I don't think I'll need to use it). 6. The aero brackets use a rubber coated steel strap to wrap under your cross bars. This strap has a quick release cam on one end that can be operated when the carrier is not key-locked. This means you can remove or install the carrier without tools in about 4 minutes, once you've done the initial install-related tuning. While the carrier seems sturdy enough to leave on the vehicle all winter, I expect I'll only install it on ski days. This feature really sets this model apart and for me was its biggest selling point. 7. Yakima packages the carrier in a nice-looking sturdy cardboard box with a flap lid. I can fit the two parts of the carrier in the box, with the brackets/straps still installed, for convenient storage (see picture). CONS: None so far, though I haven't yet actually hauled skis up the mountain! After this ski season is over and eTrailer asks me for a follow-up review, I'll let you know. I'm also thinking about seeing if the ski carrier can be attached to my small hitch-mounted cargo carrier. That would make loading and unloading the skis easier than on the roof.
First off...you can't beat the service of etrailer.com. I was looking for a ski rack for my son's 2012 Subaru Impreza with the factory roof rack (base model not the sport). I could find no reviews of anybody installing one of these on one of those. I took the plunge and will say that I am very happy with the outcome. The installation is a bit tricky and four hands help, but after the first one was installed we had the hang of it and the second one went on very quickly. Even with the expedited shipping this rack was about $50 cheaper than the Subaru ski rack. Again the etrailer.com service is fantastic. I have purchased products here before and will do so again.
# 4
Rhino-Rack Ski and Fishing Rod Carrier - Locking - 2 Pairs of Skis or 4 Fishing Rods
Last year I purchased Rino ski racks from etrailer and they work great . The hardware fit my roof racks and all the fittings are tight. Ordering was easy. Shipping was fast and I even got a follow up personal email from George a year later asking how I liked them - which was impressive! I would definitely recommend etrailer as an honest and good outdoor gear company!
Great product! I think it's a bit expensive but well worth it. I bought it to transport my fishing poles. So no long rods in my new SUV.
# 5
Thule SnowPack Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards - Silver
So easy to install onto Thule AeroBlade. Quality materials and convenient design. No significant noise noticeable from wind resistance when driving. etrailer provided great shipment/notification support and was great resource for how-to videos, commentary.
Better than I expected. Only comes with four core locks so be aware of that if you want six like I did. Bought two more locks from Thule with the same key #. Mounted this carrier on my Rhino Rack. Perfect fit and looks great. Would highly recommend.
# 6
Rhino-Rack Ski and Snowboard Carrier - Locking - 4 Pairs of Skis or 2 Boards
Howzit etrailer.com & staff. the rack itself is sturdy and more aero than comparable units. For my 2017 Subaru Crosstrek (OEM) Aero Bars, it was necessary to shim the (rear) lower/leading edge clamp assembly with two 1/8” x 1.5” x 1.5” (EPDM) rubber pads. The bars are shaped like a wing – and these shims helped to level the rear rack with the one in front. Overall - it looks very clean and functional. I might screw on some rubber ends over the ends of the mounting bolt to complete the project. Time to make some turns. Thank you!!
The Rhino Rack was easy to put up on a 2018 Subaru Outback. Took me about 10 minutes. The only issue is that the rack bottom bracket piece is is convex with an acute angle which makes it not fit perfectly on the Subaru crossbar that has a flat bottom. Loaded 2 pairs of skis and poles and the rack kept them securely fastened during transport on the highway. There was some noise from the rack during highway driving but it was minimal.
# 7
Yakima FatCat EVO 4 Ski and Snowboard Carrier - Locking - 4 Pairs of Skis or 2 Boards
I actually ended up buying a second set so I can fit a total of 8 pairs of skis on my jeep. I love the quality and ease of installation. It’s an easy to use system and love that my skis are secured.
These are extremely easy and quick to install. Love the aerodynamics of them as well as it's quality craftsmanship. Very pleased with this item and with the delivery speed! From North Shore Oahu....MAHALO
# 8
Kuat Switch 6 Ski and Snowboard Carrier - 6 Pairs of Skis or 4 Boards
Excellent ski rack. I purchased because I wanted absolutely no noise. This thing is super quiet went flipped up or down. Love the looks of it flipped down. Absolutely no complaints. Easy to use and set up.
Arrived fast, easy to install on my 2021 Toyota Rav4 Limited. Love that it folds down when not in use. Haven't been to the mountain yet but looking forward to putting it to use. Save the box for storage - came with nice foam ends to protect it.
# 9
Thule SnowPack Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards - Black
This rack easily fits 5 sets of skis for my family. It is FAIRLY easy to take on and off (could be faster if we didn't have to turn turn turn the dials). My biggest complaint is that as soon as my skis are out of it, I HAVE to remove it from my car (SUV). The noise of it empty on my roof is so loud when I am on the highway it is AWFUL! It's like it vibrates my whole car and is super loud. It only does it when there are no skis in it. It is frustrating since it would be way easier just to leave it on all winter taking my skis on and off when we need to, not the entire rack.
Just put this snowboard rack on my 2011 4runner mounted to Thule Aeroblade roof rack. Easy to install and use. Quality seems good. Like the look. No noise issues when driving. No complaints so far. Overall satisfied!
# 10
Yakima FreshTrack 4 Ski and Snowboard Carrier - Locking - 4 Pairs of Skis or 2 Boards
I love this ski rack and the service I got while making the purchase from etrailer! This rack securely holds up to 4 pair of skis and is super easy to put on and take off of the roof. I would highly recommend this rack to anyone. I would also highly recommend purchasing this product and any other rooftop rack needs from etrailer
We added two more racks to the two we already had on our Jeep. Easy to install and use
# 11
Yakima FreshTrack 6 Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards
Looks great on the vehicle. Had a little struggle tightening onto the cross bars but adapted and overcame!
It's a ski rack so its not all that exciting. I like that it is small for storage reasons when not using it. The fastening system to my Toyota Highlander factory rack is secure but a little cumbersome to apply and take off. I like to take it off when not using it to preserve my gas mileage. The boards and skis fit fine although they are stacked in order to get 4 peoples worth of equipment up there. A small price to pay for their compact size on the roof or in the garage.
# 12
Inno Gravity Ski and Snowboard Carrier - Clamp On - Locking - 3 Pairs of Fat Skis or 2 Boards
Great product, can fit 2 pairs of wide powder skis and poles in easily. No issues, left the carrier on year round
Rhino-Rack Vortex Aero Crossbars Installation - 2022 Ford Edge
Hey, it's Ethan here at etrailer. Today, we're gonna be taking a look at showing you how to install the Rhino-Rack Vortex Aero roof rack system on our 2022 Ford Edge. So with the Edge, we don't have any raised or flush rails. So if we want to get larger, longer accessories up on our roof whether that be on the sports and recreation side like kayaks, snowboard carriers, something like that, or on just the storage component whether you want roof boxes or roof baskets. A little bit more storage up on your roof. In either case, you're gonna need a roof rack system like the one we have here to do that.
Yakima JetStream Crossbars Installation - 2022 Ford Edge
How's it going It's Ethan here at etrailer.com, and today we're going to be taking a look at, and showing you how to install the Yakima Jet Stream Roof Rack System on our 2022 Ford Edge. With the Edge here, we don't have any sort of raised rails, any sort of flush rails, but if we do want to get anything longer or larger like rooftop accessories, whether that be kayaks, roof boxes, baskets, skiing/snowboard carriers, anything like that up onto our roof, we're first gonna need a roof rack system. So the process if we're getting it on this roof can be a little bit tricky, but we'll walk you through that. when we get to the install section, This is just gonna be a look at how that system fits on this car. First thing we'll notice are these crossbars. So on the top here, we can see that we do have this rubberized strip that goes all the way along the top.
SeaSucker Monkey Bars Roof Rack Installation - 2022 Ford Edge
Hey, it's Ethan here at etrailer. Today, we're gonna be taking a look at the SeaSucker Monkey Bars Roof Rack System and how it fits on a 2022 Ford Edge. So with our Edge here, we do have a naked roof, which means we don't have any raised or flush rails already installed on the vehicle. So if you wanna get a roof rack up on here to carry some larger accessories, your options are either something like this with the vacuum cups or to get a fit kit and mount your roof rack that way. Using that way can be a little bit more complicated and a little bit more involved. So if you aren't using your roof rack that often, you want a solution that you can just pop up on here, break down easily in store when you're not using it.
Inno Aero Crossbar Roof Rack Installation - 2020 Ford Edge
Hi everyone. It's Evangeline here at Etrailer and today we'll be taking a look at our Inno roof rack system with the Inno through feet, the 54 inch long Inno arrow cross bars, and our custom fit kit for your 2020 Ford Edge. So you have your Ford Edge and you want to carry different things on top of it. So if you are going out for adventures, maybe you want to put a bike rack or even a kayak on top, or if you're just going on a road trip, you might want to be able to carry more luggage or have more storage space, and you want a roof basket or a roof box. Whichever of those you want, the first thing you need is a roof rack system. So this is the Inno roof rack system with the through feet and the 54 inch long crossbars.
Rhino-Rack Roof Rack Installation - 2020 Ford Edge
Hi everyone. It's Eva-Angeline here at etrailer. And today we'll be taking a look at our rhino rack roof rack system with the 54 inch long vortex Aero bars, the 2,500 series legs, and the special custom fit kit for your 2020 Ford Edge. So you have your Ford edge, and let's say you want to carry some things with you that you don't want on the inside of your vehicle. That could be just extra bags or luggage, but you need an accessory to carry them. Or if you want to carry roof boxes or the bike racks, or even kayaks on your Ford Edge, what you first need is a cross, or two crossbars.
Inno Roof Rack Review - 2020 Ford Edge
Hi, everyone, it's Evangeline here at etrailer. And today, we'll be taking a look at our Inno roof rack system with the Inno Through Feet, our 57-inch long crossbars, and our Custom Fit Kit for your 2020 Ford Edge. So you have your Ford Edge and you're ready for adventure, or you just wanna carry some extra luggage on top of your vehicle. What if you wanna carry a bike rack or a roof basket or a roof box, or even a kayak What you first need is a roof rack system. So this is the Inno roof rack system with a little bit more overhang and a little bit more height compared to some of your other roof racks. So we're gonna go through the different specs, the different measurements, just to see if this is the right fit for your vehicle, as well as whatever you want to carry with it.
Inno Roof Rack Review - 2020 Ford Edge INK676
Hi everyone, it's Evangeline here at etrailer. And today, we'll be taking a look at our Inno roof rack system with the Inno flush feet, as well as the custom fit kit for your 2020 Ford Edge. So you have your Ford Edge and maybe you wanna take it out for adventures or you just wanna carry more things that you usually can't. What kind of things are those Well, if you wanna carry your bike racks, if you want roof boxes or roof baskets, or if you wanna carry kayaks even, what you need first is a roof rack on your Ford Edge. So this is the Inno flush feet roof rack. It sits a bit more low profile.
Yakima Roof Rack Installation - 2020 Ford Edge
Hi everyone, it's Evangeline here at etrailer. And today we will be taking a look at our Yakima Roof Rack System. So this has the Yakima JetStream Crossbars, the Baseline Towers and the Custom Fit Kit for your 2020 Ford Edge. So you have your Ford Edge, but maybe you wanna bring it to the next level. Let's say you wanna carry cargo that you don't wanna carry inside of your vehicle, those could be your camping equipment or just your extra bags. Or you may also want to bring other accessories like your bike racks, your roof boxes, your roof baskets, or even your kayaks.
Thule WingBar Evo Crossbars Installation - 2018 Ford Edge
Colin: Hey, guys. It's Colin here at etrailer. Today we have a 2018 Ford Edge. Right now we're going to be test fitting the Thule Wingbar Evo roof rack system. This is a system that has been designed to mount to the flush-mounted side rails of your Edge, and it's going to allow you to get any of your favorite rooftop accessories loaded up top so you can conserve on space on the inside of your vehicle, anything from bike racks, to cargo boxes, maybe even a kayak carrier. You're going to be able to get those loaded up and secured on this roof rack setup.Now up top, we have our 47" long wingbar evo crossbars.
Rhino Rack Roof Rack Review - 2018 Ford Edge
Hey everyone, it's Colin here at E-Trailer, and today we have a 2018 Ford Edge. We're going to test fit the Rhino-Rack Vortex Aero roof rack system. This is a roof rack system that's been designed to mount to the flush side rails of your Ford Edge. It's going to give you a really nice rack to be able to get your favorite rooftop accessories loaded on top of your Edge, rather than taking up space on the inside of your vehicle. You're going really conserve on that elbow and leg room. You're going to be able to get anything from a bike rack to a kayak carrier, maybe even a cargo box on top.
Inno Roof Rack Review - 2018 Ford Edge
Today on our 2018 Ford Edge, we're going to be test fitting NO-Aero Roof Rack System. So this NO roof rack system is going to allow us to carry roof mounted accessories. Things like cargo carriers, bike racks, kayak carriers, and more. Now these have aero bars. They're going to be a lot quieter than your traditional round or square bars and they also feature flesh mount end caps which are going to give you more of that factory look.Now this rack does allow us to use both clamp on T-channel accessories. To gain access to the T-channel, you'd simply insert your key into the cap and remove the cap.
Yakima Roof Rack Installation - 2018 Ford Edge
Today on our 2018 Ford Edge we're gonna be doing a test fit on the Yakima JetStream Crossbar Roof Rack System. This Yakima Roof Rack System is gonna allow us to carry roof mounted accessories on our Ford Edge, things like bike racks, kayak carriers, cargo boxes, and much more. It features an aerodynamic design. Like anything we put on our Ford Edge's roof, it's gonna make noise. This design is gonna be a lot quieter than your traditional round, or square bars.Now, it's gonna work with your clamp on accessories as well as your T slot accessories. What makes this crossbar different is that we don't have to remove and trim that rubber strip.
Yakima Roof Rack Review - 2018 Ford Edge
Today on our 2018 Ford Edge, we're going to be test fitting the Yakima CoreBar Roof Rack System. Now, the main thing that separates this roof rack system with others is the crossbars are made out of a steel that's covered in a nice hard plastic. Now, this increases the maximum load capacity to 220 pounds, but you will want to check in your Edge's owner's manual to make sure your roof can support that. Go ahead and use whichever number is lower.Now, because of the crossbar's steel design, it only accepts the use of clamp-on style accessories. From the bottom to the top of the roof you have three inches of clearance. Now our crossbars are held in place by four baseline towers, which feature a rubber coating.
SeaSucker Roof Rack Review - 2018 Ford Edge
Today on our 2018 Ford Edge we're going to be doing a test fit on the SeaSucker Monkey Bar roof rack system. That's part number 298-SX60000. It uses vacuum cups to adhere itself to your Ford Edge's roof. So that's very unique to this roof rack system. That means you can easily take it off and put it on maybe another vehicle in your household. It'll adhere to glass, like your Edge's roof, metal, must about any roof rack system.
Inno Roof Rack Review - 2016 Ford Edge
Today on our 2016 Ford Edge we'll be taking a look at Eno Arrow crossbars. The part number for our crossbars today are INXB115-2, for our flush feet we're using INSS200, and for our custom fit kit for the Ford Edge we're using INK676. These crossbars are a low profile aerodynamic design which will help to reduce wind noise and drag and will allow you to carry any roof-mounted accessories on top of your vehicle. This works with either channel-mounted or clamp-on accessories. The weatherstripping on the inside easily pushes down to adapt for those channel-mounted accessories as well as to help keep dirt, debris and liquid out of your crossbars when you don't have any channel-mounted accessories loaded up. All pieces of the roof rack kit come with a limited lifetime warranty and the crossbars have a 165 pound weight capacity. Here, everything we have on our table is what is included in our kit. We've got our foot pack with our locking cover.
SeaSucker Monkey Bars Roof Rack Review - 2015 Ford Edge
Hey everyone, it's Evangeline here at etrailer and today we're taking a look at how the SeaSucker Monkey Bars fit on a 2015 Ford Edge. So, if you need a quick and easy roof rack because you wanna carry around fun accessories like maybe a kayak or some roof-mounted bike racks or a roof box, then the SeaSucker Monkey Bars are designed for a quick install. Once you arrive at your destination, you can take it off quickly too. If possible I do recommend taking a look at our custom fit options for your Ford Edge, just because they give a little bit more stability and their designed to last a little bit longer since you don't have to constantly take them off and put them back on. But I do understand maybe you're in a rental car or if you just want that quick solution. So these are the 48 inch long crossbars.
Rhino-Rack RS 2500 Roof Rack Installation - 2015 Ford Edge
Today on our 2015 Ford Edge we're going to be test fitting the Rhino Rack RS 2500 Series Roof Rack, part number RRRS659B. The Rhino Rack RS Roof Rack System has a great look to it, and it almost looks factory installed, and is able to carry a wide variety of accessories to free up some space inside your vehicle. The two bars have a combined carrying capacity of 165 pounds, but you always want to double check with your vehicle's manual to make sure your roof can withstand that weight. It does have the Vortex Aero strips up at the top, and that combined with the aerodynamic shape of the bar will cut down wind noise and drag while you're driving. All four end cap legs are lockable, so once this is installed onto your roof, it's secure to your roof as well. This comes with everything including the fit kit for your specific vehicle. Now that we've gone over some of the features of the roof rack system let's go ahead and show you how it installs. We have the rear bar partially assembled on our table here, and we'll finish up by applying our fit kit to our other leg.
Rhino Rack Roof Rack Review - 2015 Ford Edge
Today on our 2015 Ford Edge, we're going to be test-fitting the Rhino-Rack Vortex Aero roof rack system, consisting of part numbers RRVA137B-2. These are the Vortex Aero Crossbars, 54 inches long. Part number RRRLKVA, these are the 2500 series legs for the Vortex Aero Crossbars, and part number DK432. This is the fit kit for the Ford Edge. The bars do also come in silver, as part number RRVA137S-2. The Rhino-Rack Vortex Aero roof rack system is great for carrying a wide variety of accessories on your roof, while freeing up space inside your vehicle. The two bars have a combined carrying capacity of 165 pounds, although you always want to double check with your vehicle's manual to make sure your roof can withstand that weight.
Yakima Roof Rack Review - 2015 Ford Edge
Today on our 2015 Ford Edge, we're going to be test fitting the Yakima Core Bar Roof Rack System, consisting of part numbers Y00421, this is the Core Bar Crossbar 50 inches long, part number Y00146, these are the Baseline Towers for the Yakima Crossbars, and part number Y06102, this is one set of the Fit Kits for your Ford Edge, and part number Y06139, and this is the final Fit Kit for your Ford Edge. The Yakima Core Bar Roof Rack System is great for carrying a wide variety of accessories on your roof while freeing up space inside your vehicle. The two bars have combined carrying capacity of 220 pounds, although you always want to double check with your vehicle's manual to make sure that your roof can withstand that weight. The bars have a nice aerodynamic shape to them and that's going to cut down wind noise and drag while you're driving. Also, all the towers have these knockouts here which you can buy lock core systems which are sold separately, so once you install this onto your roof, it will be secure to your roof as well. Know that we've gone over the features of the Roof Rack System, let's go ahead and show you how it installs. We have our rear bar partially assembled on our table here and I will finish assembling it by attaching our Baseline Tower to our Core Bar. We have our tower set up here. Our first step is we're going to insert our adapter piece that comes with our Core Bar. You just push it into place until you hear a loud click like that. Next, we'll take our bracket here, slide that over our bar, then loosely install this portion onto this.
Yakima Roof Rack Review - 2015 Ford Edge
Today on our 2015 Ford Edge Titanium we're going to be doing a test fit of the Yakima Q Tower Roof Rack System. As you can see we've already got our front bar up here in place, you can see what it's going to look like once you get it up on top of the vehicle. We're going to show you how to place on that second bar, place everything together, how it all assembles and comes together as one bar and set-up here. Note that we did already put the front bar on measuring from the edge of the glass here to the front of the foot pack here, that's going to be 13" in distance. The distance from this Q Tower to the other Q Tower on the other side, at the same point, is going to be 43 and 5/8 ", making sure that you have an even amount of bar overhang on each side. We'll go ahead and go through on how all that stuff that I just said, the bar overhang and what part is what part, right here right now. You're going to have the bar, which is part number Y00409, and your Q towers which will be your podium styles, they're going to sit up, those are part number Y00124.
Rhino Rack Roof Rack Review - 2014 Ford Edge
Speaker 1: Today on our 2014 Ford Edge, we're going to be doing a test fit of the Rhino-Rack Vortex Aero 2500 Series roof rack system. It's available in black with part numbers RRVA137B-2. They're also available in silver crossbars with part number RRVA137S-2. We'll also be using RRLKVA and part number DK228. The Rhino-Rack Rook Rack System is a premium roof rack for your Ford Edge. It features two 54" aluminum Vortex Aero crossbars.
Rhino Rack Roof Rack Review - 2013 Ford Edge
Speaker 1: Today on our 2013 Ford Edge we're going to be test fitting the Rhino Rack Vortex Aero Roof Rack System. This is going to consist of part numbers RRVA137B-2. These are the Vortex Aero Crossbars, 54 inches long. These also come in silver, part number RRVA137S-2. We'll also be using part number RRRLKVA, these are the 2500 series feet for the Vortex Aero Crossbars. And finally part number DK228, and that's going to be the fit kit, and the clamps that clamp on the door frame of your existing vehicle.Now, how we got the front one installed here, we had everything assembled, we put it into place, and then we measured from the center of the door jamb here to the center of the bar on both sides to make sure it was even, to get everything measured out.
Rhino-Rack RS 2500 Vortex Aero Roof Rack Installation - 2013 Ford Edge
Today on our 2013 Ford Edge we'll be taking a look at and showing you how to install the Rhino Rack RS 2500 Roof Rack System, part number: RRRS524B. This kit is also available in silver, part number: RRRS524. The Rhino Rack Roof Rack System is a great solution for carrying your bike racks, cargo baskets and ski and snowboard carriers on your vehicle's roof. This will allow you to empty up space inside your cargo area. This is an aerodynamic roof rack that is going to have vortex weatherstrip on the inside that helps to reduce wind, noise and drag compared to other styled crossbars. This weatherstrip on the top is removable and it is going to help to keep dirt, debris and liquid out of your crossbar. It is also easily cutdown to accommodate channel-mounted accessories. The locking end cap is going to make sure your refract system stays secure to your vehicle and the custom pad, as well as the clamp, is custom fit to your vehicle and has rubber on any portion that touches your vehicle; so it will help to reduce any kind of scratches or abrasions. This roof rack system has a 165 pound weight pound capacity, so you do want to double check your vehicle's owner's manual to make sure it can withstand that much weight. We all ready have our first crossbar installed on our vehicle. We're going to show you how we put the second one together.
SportRack Semi-Custom Roof Rack Review - 2013 Ford Edge
Today, on our 2013, Ford Edge, we'll be test fitting the Sport Rack semi-custom roof rackfor naked roofssquare cross bars 50 inches long, part number SR-1010 with our roof rack assembled according to the instructions, we'll begin our test fit by opening both front doors. We'll place our front bar onto the front part of our roof. To ensure that we have this bar in the correct spot, we need to measure 9 inches from the center of our door jamb to the center of our footpack. We'll do this measurement on both sides, to make sure that our feet are in-linewith each other. We can use the included Allen key to tighten the Allen bolt to secure our foot clamp around the roof line of our vehicle. We'll do this on both sides.
Rhino-Rack Heavy Duty Roof Rack Installation - 2013 Ford Edge
Today on our 2013 Ford Edge, we'll be test fitting the Rhino Rack 2500 Series Roof Rack with a heavy duty square bars 44 inches long and silver, part number DH1375S. We'll also be using the custom DKclamps and pads for the Rhino Rack 2500 Series Roof Rack systems, part number DK228. With our roof rack assembled according to the instructions, we'll grab our front bar and place it onto the front part of our roof.We need to measure from the center of the door jam to the center arrow of leg foot plate.This measurement needs to be 170 millimeters or 17 centimeters. We'll do this measurement on both sides to insure that our feet are in line with each other. Once we have it in place, we can use the included tool to tighten down the bolt, which will secure our clamp around our roof line. We'll make our way back and forth, tightening a little bit at a time, so we don' t lose our position.
What our customers are saying:
"Very easy process, good prices and my products were shipped on time and were delivered on time. The instructional videos online helped make installation easy!"