# 1
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
This has worked great to reduce my 2" hitch so that I can continue to use my 1 1/4" Thule bike rack, and I like that it doesn't extend out much from the hitch. After my last trip though, the inset separated from the larger piece. I can still use it, but without the smaller piece fixed in place, I can't put it on the car first and then slide the bike rack into it since the smaller piece slides, and it's impossible to line the holes up. It's also rusted more than I expected. It wasn't inexpensive, and I was hoping it would last longer. I've used it for maybe a dozen trips.
Perfect fit BUT the inner tube broke away from the outer tube after about a dozen trips. One small weld on the outside corner is all that holds it on. The small amount of play must have been too much for it. I was even using an anti-rattle lock pin. Very disappointing due to the price point. And now it’s unsafe to use as it could slip right out of the receiver.
# 2
MaxxTow Trailer Hitch Receiver Adapter - 2" to 1-1/4" Hitch - 11" Long
Installed my 2” hitch but don’t have a 2” bike trailer yet. I purchased this to continue to use my 1.25” bike trailer (until I find a deal). Used this over Thanksgiving weekend on I35 in Texas (tons of traffic)and I’m very pleased with the performance. I’m was secure and bikes traveled just fine.
I ordered this adapter from e-Trailer so I could extend my bike rack past my spare tire on my 2005 Honda CRV. This solved my problem and this thing is well made to take the weight. I'm glad I purchased from e-trailer because I know now that they sell quality products as I have also purchased a new receiver, ball mount and 2' ball to pull my trailer. If your goal is quality, great service and fast shipping then e-Trailer is one company to go with.
# 3
Roadmaster Dual Hitch Receiver Adapter, 2" or 4" Drop/Rise
Exactly what I needed. Now able to add storage box and still pull tow Dolly.
I contacted etrailer and spoke with Terri N. I had previously purchased on 3 separate occasions another brand of dual hitch (none from etrailer) which all bent when pulling my 2018 Jeep Wrangler behind our 2014 Fleetwood Bounder 35K Motorhome with a Hollywood bike frame carrying 2 Rad Power e-bikes. Apparently, we were using the wrong adaptor. She was VERY helpful with information, discouraging more than 1 hitch adaptor and recommended the 10,000 pound dual hitch receiver with a 2-4 in drop/rise. So far, it seems to be working fine. My only concern is that there is not enough clearance to fold up my Blue Ox tow bar while connected to the hitch. Also, the front of the Jeep bumper is VERY close to the bike rack upon turning the Motorhome.
# 4
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
Solidly made. Wish all of these would come with optional locking pins and clamps to minimize movement as I use mine primarily for a bike rack with very nice bikes aboard.
Very heavy duty. Will use it with a bike rack I had for another vehicle that had a 2" receiver.
# 5
Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver - 7" Long
Fantastic Product. Saved me from having to buy a brand new bike holder for my new car with a different hitch size.
Professional, delivered a day early. As promised. What more can you want.
# 6
MaxxTow Hitch Extender with Step - 2" Hitches - 13-1/2" Long - 7" x 14" Platform
Affordable front step (wide platform) to service lifted vechicles and will provide distance between exterior mounted spare tire and hitch rack. Suggestion: design the step to fold up or down for a full time install.
Works as advertised. I use it full time. I painted the step surface with Herculon bed liner for a rubberized non slip surface, that works even when covered with frost or mud. Only down side, is that it reduces the tongue weight of the truck hitch by 50%. I typically use it to haul a 2 horse trailer. If it ever gets damaged, I will immediately by a replacement.
# 7
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver (Class II Only)
This adapter allows us to use a bike rack we have across all our cars. It is perfect for light duty applications, easy to use and it can be stored in the trunk until you need it. I would definitely recommend it.
I was concerned that the adapter might not fit on my 2023 Toyota Venza, LE, but it fits just fine. So, the notice that the adapter will not fit a class one hitch does not apply to the Venza, even though the Venza specifications indicates it is a class one hitch.
# 8
Curt Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2"
Dont know what say, they are going to build this truck in april!! Thanks for quick service,cant wait to install.Thanks
product worked out just fine / GREAT!!!
# 9
CR Brophy Hitch Extender for 1-1/4" Hitch Receivers - 5-3/4" Long
Here in Saskatoon, Canada, I am very pleased to endorse J&J's flagpole holder and hitch mount extension products. Solid construction and beautifully finished engineered pieces. Fitted easily onto my '92 Camaro RS, for Shriner parades. Supporting a worthy philanthropic effort for children.
1 1/4" extension fit well (could be a tiny more snug). but was just what i needed for my mini cooper and new bike rack. Fast Ship good price and I would use them again. Now i can use my bike rack! :)
# 10
Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches - Passenger's Side
Excellent product, solidly built and easy to install. I was hesitant because of the full size spare tire on the back ladder. The videos and the specifications (especially the sizing details) gave me all the info I needed to make the decision to install it on my Sprinter. The swing away rack gives me full access to the rear of the vehicle. I wish I had bought it sooner.
Exactly what I was looking for. Can swing the bikes out of the way to access the truck bed. Locks back into position and I am not worried about it being secure.
# 11
Roadmaster Dual Hitch Receiver Adapter, 2 " or 8" Drop/Rise
Perfect for my application.
Works great! I use it on my motorhome to carry my bikes with a Rocky Mounts Carrier and flat tow my car with my Blue Ox system. It places the bike carrier at an optimal height over the front of the car but my may be different for other bike carriers. Very sturdy and seems to be quality all around.
# 12
Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches - Driver's Side
Love the rack and the folks at e-trailer got it to me remarkably fast. Everything looked great set up for the most part. The directions were very clear and it required minimal effort.
Shipped ahead of schedule in excellent condition. Kuat Pivot is built extremely well, heavy duty, and looks sharp.
# 13
Saris Swing Away Hitch Extender for Bike Racks - 2" Hitches
Already have a Sris bike rack, has been an excellent rack and well be compatible with this hitch, both very well built
Love it! It swings out of the way so I can get the back door open. The other advantage is it allows the back door to be open a few inches at night (when the hitch is in the locked position) for airflow when it’s hot.
# 14
Roadmaster Dual Hitch Receiver Adapter, 2" or 10" Drop/Rise
I love the product not just for the obvious reasons such as it’s extremely durable and well made for safety but specifically for length of the arm. The arm length is just long enough to clear my hitch rack walls, which allowed me to plug in my bike rack. I would certainly recommend this product to others. I haven’t seen any marketing for this specific use case so have at it.
I’ve been using this product every day for over a year at this point. On the back of our Class C RV it supports a bike rack carrying 3 bikes (one is a heavy eBike) and a Roadmaster tow bar, which connects to a Jeep Wrangler when we travel. It provides the need height for the bike rack and the drop needed for the tow bar to be level with front of the Jeep. We are full time RVers, so it gets a lot of use. It has worked perfectly and remains in new condition.
# 15
Roadmaster High Low Adapter for Tow Bars - 2-1/2" Hitches - 4" Rise/Drop - 10K GTW
It extrudes to far out with the setup that I have making the trailer lights cord to short to plug up. But your product looks great
I'm flat towing an F350 behind my Entegra Cornerstone. The 4" lift allows for level tow arms when towing this tall vehicle. I've towed 7500 miles over the past year with no issues. This is a solid well-built product.
# 16
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise
I bought this adapter so that I could mount a bike rack on the back of my 2012 Honda Civic. The adapter got the bikes high enough so that they wouldn't hit the pavement when backing out of my driveway and transitioning to the street. The product is definitely strong and well made. It was put to the test with a very heavy steel thule bike rack that was definitely heavier than all 4 of the bikes that were mounted on it. The fit was precise so it didn't hit my rear bumper as well.
For being so expensive, you would think it would be better quality. It’s not aligned properly and when i attach my bike rack, it’s crooked. Second, the weld was sloppy and had extra solder. So much so, that i couldn’t push it into the hitch far enough to get the pin in. I had to remove some solder do it would fit properly (all the way in so i could put the pin in). The adapter was almost as expensive as the hitch.
# 17
Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches
Solid, bullet proof, yet the convenient swing away allows unrestricted access to the back of my vehicle. It is heavy, but being made of steel, it holds a heavy load. I have an old solid steel Thule rack that I modified so that I can move the bike carrier bars 180 degrees - from the traditional position carrying the bikes away from the car and carrier, or flipped over so that the bike carriers rest on my spare and carry the bikes between the rack and the car. This allows me to carry very heavy bikes, such as e-bikes compactly without extending the length of my vehicle much, and still allowing me to use the swing away feature of the Yamaha extender. Photo shows a light road bike on the hitch, but it works equally as well with heavier or multiple bikes.
On our first trip the hitch worked wonderfully, but our bike rack failed us. On our second trip, the hitch bolts loosened and we constantly had to check to make sure it was not loose. Very disappointed in both products. We had them put on our vehicle by my adult son, who works with machinery. The product was poorly made and designed. This was not the fault of the user or the person who attached the hitch and rack.
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."