# 1
Curt Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2"
Dont know what say, they are going to build this truck in april!! Thanks for quick service,cant wait to install.Thanks
product worked out just fine / GREAT!!!
# 2
Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long
Who do I contact about getting the right extension bar? The one I ordered Is a 2 1/2 inch which I need a 2 inch to slide into my receiver or if you guys have a 10 to 12 inch, 2 inch extension so I can connect it I sent a photo of the end that is 2 1/2 which I need it to be 2 inches to slide into my receiver
I recently swapped out the stock 2" receiver for a 2-1/2" to allow me to purchase and use this extension to get past the end of my Lance 1010 Camper. I believe I will have no issues now towing any trailer (within allowable spec's) or carrying my motorcycle carrier. Great quality piece. can't wait to try it out...
# 3
Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long
Just received the 41/48 inch hitch extension today so haven’t actually used it. However, one can tell the high quality by looking at the welds and thick paint coating. This item is extremely heavy. I expected some weight to it, but it surprised me. Also, the tubing has very tight tolerances. I have two ball mounts, neither of which slid into the extension on their own. I had to pound them in and tap them out with a 3 pound hammer. Once paint and labels were scraped away by this action the ball mounts were able to be slid in by hand. This extension will be used on my dually carrying my truck camper. I’ll be towing an aluminum trailer with a Can Am Spyder. Total weight towed will be less than 2000 pounds so I don’t expect the extension to be subjected to any stress.
As per my last 3 orders here are some pictures of how I received the item along with what was broke or bent. I can fix it but I shouldn’t have to. So I will try elsewhere from now on cant deal with your shipping dept , anymore.
# 4
Brophy Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
We were looking for a solution to haul our utv when pulling our camper. This extender allowed us to leave the tailgate down and still have enough clearance to not damage the tailgate. Downside--this extender amplifies the amount of movement with the hitch. This is more than a simple hitch clamp could fix. I added several modifications to completely eliminate the hitch movement. We have taken several trips since the installation and no issues with pulling the trailer. We did have to extend the safety chains about 4 links. Overall a good product and it accomplished the goal. As always,etrailer personnel are knowledgeable, easy to deal with and have quick shipments.
My truck has a 2-1/2" receiver. I already owned a heavy duty 2" hitch. This 2" reducer & extender was perfect for my use. I used it to tow a rental trailer and needed to extend my receiver to allow me to tow with the tailgate down. This reducer/extender did the trick. I had plenty of room making tight u-turns. The quality of the product is very good. I would recommend this product to others.
# 5
Buyers Products 3" to 2" Receiver Tube Adapter
Unfortunately this receiver adapter did not fit my Ford F250 3" hitch, way too tight. Worked with Arthur from e-trailer to obtain a return/refund. After looking at reviews, I see many other folks had the same issue. If I were e-trailer I would pull this item from my product offering.
When I went to use this my bike rack would not fit in the 2" receiver because it was poorly made. Unfortunately it was well past etrailers 60 day return policy so they told me they would not help me. I contacted buyers myself and they were happy to help me and took the old one back and shipped me a new one that works great. If buyers did it for me, they certainly would have done it for etrailer but etrailer couldn't be bothered with it. I will buy buyers products again but will not buy anything from etrailer anymore. They also told me I would need to buy a whole new $XXX base for my bw companion hitch because the parts were not available. A quick call to bw and my. $XX parts were on their way. Again,poor service from etrailer. Back to local shops for me.
# 6
Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
This hitch worked well on my Kona electric. Etrailer provides outstanding service. Will definitely purchase from this quality company again.
Excellent product, very sturdy. We have been using them on our trailers for years.
# 7
B&W Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
Excellent Selection, great products, easy website, super fast delivery, Thank you, etrailer.com!!
This item performs exactly as one would expect a chunk of metal that fits into another chunk of metal. I ordered this one because it fits flush with the end of the oversized hitch on my F250. As always it was a pleasure to deal with E-Trailer!
# 8
Curt Extender for 2" Hitch Receivers -18" Long
I got this hitch extender to put on my camper so that I could mount my bike rack. It worked like a charm!! The bike rack and bike were super solid on the trip cross country!!
First off, I love Curt products. When I found this item at Etrailer at this low price I was shocked. I was prepared to receive a knock off. I tried my luck and was amazed the product not only showed up at my doorstep the next day but is a very high quality Curt product. My handyman was working on the house and he couldn’t believe the quality at that price. Thanks Etrailer! You are my new go to for my traveling needs.
# 9
B&W Hitch Receiver Reducer Sleeve - 3" to 2-1/2"
I love the small ears on the edge that prevent this Sleeve from sliding into the 3” receiver while trying to slide in a hitch. After a year shows little signs of rust even though it has been left on the truck entire time. Of course I leave on the truck since I have a locking hitch pin.
Good quality, it's going work out great for the time until I upgrade to a better hitch.
# 10
Malone 2" Dual Purpose Hitch Receiver
Used the Malone 2" Dual Purpose Hitch Receiver to have a bike rack with two bikes on the upper Receiver and a 21' bassboat on the lower Receiver. Ran down to Florida Everglades, Florida Keys and back home. Almost exactly 4,000 miles. Hitch worked perfectly. I did find that you can not "jacknife" the boat as much or the bow of the boat will touch the bikes on the rack but that is to be expected. Hitch was quiet, strong and exceeded my expectations. Easy to install and looking forward to using it again in a month for another 4,000 mile road trip. Note: I drive fast and the roads are not always perfect. This is a sturdy Hitch Receiver. Hope this review helps you. Sorry, crummy photo as the Receiver is a "set it and forget it" product. Be well.
I bought this Dual Purpose Receiver at Twice the price of that Big online company because of reviews from owners that bought on both sites. After evaluating the reviews, I chose to go with etrailer because I have come to trust them as a company that gives you a great product that they will stand behind and they appreciate your business. I haven’t used this receiver yet, but can look at it and I am comfortable that I made the right choice. I will follow up with another review after I use it.
# 11
Hitch Extender for 2" Trailer Hitches - 8" Long
Just received my 80307 Hitch Extender for 2" Trailer Hitches - 8" Long. My newly upsized spare tire had been preventing the use of my hitch rack. Was very pleased with the etrailer service and the ease of using the website. The excellent descriptions, photos, and even videos really help shopping for these types of specialty parts. Shipping went well and expediently. I trial fit the extension with my hitch rack today, and the photos are attached. It fit well and did the trick. I drove around and heard no rattles from it at all.
Needed to extend receiver to reach past box and add a carrier for cans.
# 12
Draw-Tite Reducer Sleeve with Collar - 3" to 2-1/2"
Well made now can open tailgate
As stated the front hole on the reducer is 3/4”. I will weld a 5/8 piece of pipe in the reducer to make it work for me. That same reducer with two 5/8” holes would be great but I will make it work. I have a 3” receiver on my f350 with a 5/8” pin so I don’t know why the would make the reducer with a 3/4” pin hole. As always though you have great products and service. Thanks
# 13
Trailer Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2"
Quick and easy ordering and delivery. The hitch receiver reducer sleeve fits perfectly.
Exactly as described. Fit down to my 2" hitch items. It was slightly difficult to get all sleeves and item aligned and insert the hitch pin but we made it.
# 14
Roadmaster Dual Hitch Receiver Adapter, 2 " or 8" Drop/Rise
Perfect for my application.
Works great! I use it on my motorhome to carry my bikes with a Rocky Mounts Carrier and flat tow my car with my Blue Ox system. It places the bike carrier at an optimal height over the front of the car but my may be different for other bike carriers. Very sturdy and seems to be quality all around.
# 15
Brophy Hitch Extender with Step - 2" Hitches - 19" Long - 6-1/2" x 17" Platform
This Brophy Hitch Extender with Step worked GREAT! Allowed me to keep the tailgate on on truck down so I could load my ATV into the truck bed and still tow the trailer with stabilizer bars without banging into the trailer jack.
We are using this extension on a truck with a 8 ft bed and popup truck camper. We are pulling two horses in a 12ft steel stock trailer. The step helps for getting into the camper. The only thing that I don't like is that it adds one more sloppy joint between the trailer, but I don't think I could have the truck camper and still pull the trailer without worrying about hitting the trailer without it. Other than that, it is very well built and solid. I would buy it again for sure. I have been happy with purchasing trailer products from etrailer and will do so in the future when the need arises.
# 16
Blue Ox Hitch Reducer Sleeve - 2-1/2" to 2" Trailer Hitch
Fits just right. Set up with no issues. Using to adapt my truck 2 1/2” receiver to my 2” bike rack.
Works like a champ. I’d gotten a new truck with larger receiver and obviously didn’t want to buy a new ball mount for our weight distributing hitch. Using the adapter initially hurt my head as a ‘band aid’ solution, but it worked flawlessly on a recent 2000 mile trip. Zero regrets; will never hesitate to use it.
What our customers are saying:
"In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!"