# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Purchased a hidden hitch and hitch insert from etrailer. It was very easy to install. The vidios they have on line are very helpful and one person can install the hitch. I have a 2012 Nissan Rouge and I used a hydraulic jack to lift the hitch up while I maunevered it into to place. Which was very easy. The only trouble I had was taking the bolts out of the tow ring because the were in very tight. Other than that the whole process took about 30 min. The delivery was quick and the products were excellent.
The product doesn't come with a Hitch Pin. Just remember to order it. Thank you for a good shopping experience.
# 2
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Ordered a hitch, wiring and the ball to fit my Nissan Rogue. Everything as described. Price competitive if not lower. High quality and very fast shipping
# 3
Draw Tite Drawbar for 1-1/4" Hitch - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 3.5K
Great product at a great price!!!!
Works perfectly for me. I use it to tow a motorcycle trailer behind my Mini Cooper with a concealed hitch so I need the extra length to clear the bumper. No complaints.
# 4
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
Works great. Good tight fit
heavy duty
# 5
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
heavy duty
Works great. Good tight fit
# 6
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Purchased a hidden hitch and hitch insert from etrailer. It was very easy to install. The vidios they have on line are very helpful and one person can install the hitch. I have a 2012 Nissan Rouge and I used a hydraulic jack to lift the hitch up while I maunevered it into to place. Which was very easy. The only trouble I had was taking the bolts out of the tow ring because the were in very tight. Other than that the whole process took about 30 min. The delivery was quick and the products were excellent.
The product doesn't come with a Hitch Pin. Just remember to order it. Thank you for a good shopping experience.
# 7
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
perfect
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 8
Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs
Very nice product. Received on time as promised, packaged well, price was very reasonable. Very happy with purchasing experience. Thank you!
So far everything looks good hasn’t been installed yet. When box arrived there was a large hole in the side of the box so i had to open to make sure all parts were there. Glad that it looks like they all were. Most of the time you wanna wait a month to ask for a review to give client time to install not the day it was delivered.
# 9
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
Great product at a great price!!!!
Excellent customer service & support! Bought for my 2013 Honda Fit and plan to trailer my Yamaha Tenere motorcycle around North America! Very happy with hitch.
# 10
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
Good quality product that gets hitch ball/trailer coupler a few inches further away from rear bumper of new NISSAN ROGUE.
# 11
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Good quality product that gets hitch ball/trailer coupler a few inches further away from rear bumper of new NISSAN ROGUE.
# 12
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
# 13
Curt Class III Drawbar - 2" Rise - 4" Drop - 13" Long - 7,500 lbs
Works great. Good tight fit
heavy duty
# 14
Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs
Incorrectly listed on etrailers as a 3-1/8” rise, when really this is a 5-1/8” rise (marked correctly on the item itself, but listed incorrectly on this website).
I am completely satisfied with the product. Great quality and excellent finish. Prompt shipping and excellent customer service. It is stylish and functional and will meet my needs for towing up to 3,500 pounds. I would definitely do business with this company again!!!
# 15
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 16
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
Works great. Good tight fit
heavy duty
# 17
B&W Tow & Stow Pintle Hook with 2" Ball - 2" Hitches - 10,000 lbs/16,000 lbs
Great product and very helpful folks to talk to. I’ve ordered from etrailer many times and it won’t be my last.
This hitch is a very handy addition to my toolbox! I work for a county road department, and I’m always pulling different trailers to and from job sites. I can switch from a 2 5/16” ball hitch, to a pintle hitch with the flip of a lever! Thanks B and W!
# 18
Curt Class II Drawbar - 3/8" Rise, 1" Drop - 7-13/16" Long - 3,500 lbs
Works great. Good tight fit
heavy duty
# 19
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
Good quality product that gets hitch ball/trailer coupler a few inches further away from rear bumper of new NISSAN ROGUE.
# 20
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
Works great. Good tight fit
heavy duty
What our customers are saying:
"Quick processing, and delivery. reasonably priced very satisfied"