# 1
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Sara R was helpful helping me find the right hitch for what I described as needing. I was excited to see the hitch pin in my order details even though I didn't order it. Sadly, the picture gave me a false impression. Overall, excellent customer service and product.
Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.
# 2
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Bought this for my 2012 Jeep Patriot and it is the perfect rise for what I need it for. The 2-3/4" rise is just what you need for the Draw-Tite setup on a Patriot.
This product has arrived in excellent condition, but has not been installed yet. Thank you for such great customer service, and sending it in such a timely manner.
# 3
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
I have two of these. My first I bought two years ago. I very highly recommend this Curt Class III Ballmount 2" Drop because of its price, durability and quality. I towed various class 3 loads with ease and confidence with this ballmount. It slides into the hitch and does its job without fail. It looks excellent after towing a load. etrailer's price is about as good as it gets and delivery is very speedy.
Easy install, took around 30 minutes by my self to install. Hardest part of install was torquing the bolts ! Installed 13322 Class III Hitch - Gm 1500/2500 Pickup and Curt Class III Ballmount -2ball-2 Drop
# 4
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks
# 5
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 11-1/4" Long - 10K
Did not fit my application been sitting on a shelf
Sturdy and feels strong / heavy. Love it, except for the part when I forget it is behind the van and run into it :)) Not pleasant. Easy to install and the drop is just right for my trailer. Before I used to have to raise the tongue all the way to the top of the jack, now it feels like it is just there. The trailer seems to be well balanced now.
# 6
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
I purchased the etrailer.com 2-3/4 " Rise or 4" Drop Ball Mount Kit, Curt Trailer Hitch Receiver and Twist-in 7-Pole RV-Style Trailer Connector for my 2011 Chevy Silverado. Quick Delivery! All the necessary parts arrived in perfect condition. Directions were spot on and the instructional videos were great.
The drop ball mount is the perfect size for my Jeep. The versatile hitch balls are convenient. Thank you for putting together a great kit, providing excellent communication, and delivering it quickly.
# 7
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K
This is a beast of a drawbar, solid forged steel & well finished. It's also very heavy and E-Trailer needed to ship 3 times because the first two broke out of the box they were packed in. (Someone in the USPS has a couple nice draw bars.) Fortunately the 3rd effort was much better packed in a reinforced box and was successfully delivered. E-Trailer customer service was exemplary in resolving the shipment issue & I will definitely shop with them again.
I had a great experience ordering from you. Your organization kept me completely up to date with the order & shipping process and delivered the exact products I ordered. Attached is a photo of the 16,000 lbs capacity hitch and 30,000 lbs 2 5/16 ball you sold me in use. The boat and trailer total about 12,000 pounds. Thanks again.
# 8
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
# 9
Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 9-1/4" Long - 16K
Perfectly as described, Box was a heavy hitch and the box must have been damaged in shipping so it was a little delayed. You can't mess up a forged hitch it still is in excellent condition.
This simple ball mount will get the job done. It's a solid casting so it weighs a lot.
# 10
Curt Heavy Duty Forged Ball Mount with 2-5/16" Ball - 2" Drop - 15,000 lbs
I tried twice to get this hitch and ball from [online vendor]. Twice the shipment was lost and I had to get a refund. Shipment from etrailer is right the first time and arrived quickly. Plus, since the ball is already torqued on the ball mount, I don't need to by a large socket.
We’ve already installed it and hitched up the horse trailer. Works great for my needs. Half the weight of the much heavier weight distribution system we had been using (and will continue to use for Interstate travel). Hook up was fast and easy.
# 11
Convert-A-Ball Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 10,000 lbs
Good, very solid ball mount with just the extra rise I needed, 2 3/4", to get level trailer and good clearance for the trailer jack. But excessive shipping charges from etrailer, $[XX] for an $[XX] purchase. Found out to my cost later that [online vendor] would have shipped for free.
As a full-time RVer, e-shopping is very important for us. etrailer was the right place to shop. Right product, delivered on-time for a great price. You beat the local discount RV store by $25 including shipping. At the same time, I had another outfit send me a clearly inferior product to the one they displayed. Said they would e-mail a pre-paid shipping label for the return (didn't) and tried to put the blame on Amazon. Thanks etrailer for a great experience !
# 12
Curt Heavy Duty Forged Ball Mount for 2" Hitches - 3" Rise - 4" Drop - 17,000 lbs
I just opened up my new Class 5 Curt XD hitch and have not yet installed it so my comments are based on first impressions only. It is very heavy duty - and heavy at 40 lbs. - made of extremely thick metal and outfitted with quality Grade 8 bolts with square necks so they won’t turn when torquing on the nuts to attach the main tube to the side mounting plates. My bolts are plated yellow (which I like) rather than silver as you may have seen in some online photographs. It is substantially beefier than my existing Grade 4 hitch and superior in every way. It’s an impressive piece of hardware. I cannot imagine anyone being disappointed with it on specifications, quality, strength, and general appearance. It’s a beast. What I AM disappointed in is Curt’s packaging and the condition in which the hitch arrived. (This is NOT a reflection on etrailer.com as the hitch arrived in Curt’s original packaging.) The unassembled main tube and the two side mounting plates come bundled together with nothing separating them but shrink wrap. No cardboard, plastic, even paper coming between the metal surfaces - just shrinkwrap probably not even a couple of mils thick. With basically metal-to-metal contact in an oversized-box with the bundle jostling around, it would be a miracle if there were no scratches, gouges, or some type of damage to at least one piece, which is exactly what happened to my hitch. The main hitch tube, on the exterior facing plane, on the driver side where I’ll see it every day, has some gouges on it that go through the powder-coating to bare metal. I can - and will - paint them to prevent rust (and, therefore, have to paint the whole hitch to match). But the gouges will still be noticeable as they go through the thicker, pebbly, powder-coat finish and will undoubtedly still appear as depressions in the surface even once painted. I fully realize this kind of surface damage will almost certainly happen with regular usage of the hitch anyway and that it’s certifiable to demand absolute perfection in anything. But if you are someone who cares about the aesthetics of your equipment and keeping it looking new for as long as possible, it is very disappointing to receive such an expensive and prominent piece of hardware damaged right out of the box and requiring immediate repainting. The plastic parts bag had also ripped open in transit, with nuts, bolts, shims, etc. rattling around in the box. I am dumbfounded that Curt packages such a high-quality piece of equipment so shoddily where such damage is virtually unavoidable. I bought from Curt solely due to their being an American manufacturer and to support American workers so this is doubly discouraging. It’s a trivial complaint in the big scheme of things and not worth demanding a replacement over. Just be aware that unless Curt changes their packaging practices it is very possible you will have the wind taken out of your towing project sails just as I have. Again, this in no way reflects on etrailer. My experience to date with etrailer (website, educational resources, staff reviews, ordering, tracking, email contact, etc.) has been beyond exemplary in every way. They rank as a Top Five online retailer in my opinion, maybe even the best.
First of all, the products you find at etrailer are not your garden variety, home depot kind of fair. Much higher quality and grade/weight ratings. So to be able to get hard to find items and then by orderring at least 100$ worth of stuff also get it delivered free in 4 days, is awesome. The prices are incredible too.
# 13
Convert-A-Ball Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 14,000 lbs
Product is awesome. Shipping container was destroyed when it arrived. Product was not hurt.
Was hoping this would help with shock reduction. It doesn't. Has to fit loosely into hitch to function so it slams side to side and front to back. Would not recommend. Very disappointed in this purchase. Trailers service is exceptional. Easy to order. Arrived quickly, well packed.
# 14
Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs
Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.
definitely solid as a rock
# 15
Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
The hitch and the trailer ball with the hitch was perfect for making my trailer level behind my vehicle
Shipping was a mess, lost the first one in the mail somewhere because no one thought a 50# hitch would punch through cardboard. It is working as expected, but does not seem to be a true 2" drop.
# 16
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
Purchased this hitch as a companion for our Reese anti sway control. The small ball for the Reese sway control fits in the bracket and the 2” drop on the hitch is exactly what we needed to have our Jayco camper level when towing.
# 17
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
Slightly longer, so you can open your tailgate with a cargo trailer attached. Trailers with a tongue jack that is forward are problematic for tailgates...
I’m pleased with the product and how prompt the delivery was. However the packaging was insufficient and the packaging was torn open all over. Scuffing of the finish is a result and of little consequence due to the intended use. It’s a stinger w/ball for motorhome. May I suggest better packaging in the future
# 18
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Allows me to open the tailgate on the truck with a trailer hitched up.
The one foot ball mount works great on a 2014 Chevrolet Silverado work truck(no lift kit). We use it for a one axle, lawn care/utility trailer. It is used at least half the work week and has held up for a year. It may not be a good choice for a heavier trailer, but at that point we would also purchase a 2500 truck too. The mount helps clear the jack when the tailgate is opened with about 2 inches to spare.
# 19
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 20
Curt Class III Ball Mount with 2-5/16" Ball - 2" Drop - 7,500 lbs
Everything arrived on time and well packaged. I installed a Curt hitch receiver to go with this ball mount. Installation for the hitch went exactly as described and was fairly simple for even a novice like me. Very pleased with etrailer.com and with Curt brand products in general. Couldn't be happier with the process from beginning to end. And the hitch looks and works great!
etrailer is great! My hitch shipped quickly and was packaged well. Plus customer service has been great keeping me updated and staying in touch with my order.
What our customers are saying:
"Excellent service and communication. Expect part to be excellent too!"