bing tracking image

Best 2014 Nissan Frontier Bike Racks

change vehicle


Bike Rack Videos

Thule Truck Bed Bike Racks Review - 2014 Nissan Frontier

Today on our 2014 Nissan Frontier, we're going to be test fitting the 54 inch wide Thule Gate Mate, Tailgate Pad and Bike Rack, part number TH823. We'll begin our test fit by making sure that all of our straps are loosened. We'll want to rest this over the tailgate. Once we have it centered on our tailgate, we can open the flap here, that's going to give us access to the tailgate handle. We'll lower this down. We'll grab our straps and we'll want to fasten them around so any which way you can, I go right through here so that I can reach on the backside of the tailgate to grab the ones closest to the bed or closest to the edge of the tailgate, excuse me. We'll then fasten them through the straps. We're going to pull this tight, making sure we're taking any slack out.



Thule Roof Bike Racks Review - 2014 Nissan Frontier

Today on our 2014 Nissan Frontier, we're going to be test fitting the Thule Paceline Roof-Mounted Bike Rack part number TH527. We'll start our test fit by placing the rack on top of our vehicle. We're going to be test fitting this today on the Thule Rapid Traverse AeroBlade Roof Rack System. I'm going to go ahead and open the door just so I have a little bit more height to stand on the jam. Once you have this up here, we'll start by doing the front system here. What you're going to do, you have to have the front nose open to be able to open this back part. Let's go open that and get the T-bolt up from underneath of there. We then position this around.



Thule Big Mouth Roof Bike Racks Review - 2014 Nissan Frontier

Today, on our 2014 Nissan Frontier, we're going to be test fitting the Thule Big Mouth. This is a frame clamp style, roof mounted bike rack. Its part number is TH599XTR. We've already got our Thule Traverse roof rack system that's installed on the Frontier, so we're going to begin our test fit by placing our rack right up onto our load bars. At the front, as you can see, this one's already separated. We'll separate our clamps to where the lower portion is apart from our T bolts. We'll then move it so the T bolts come around the lower ...



Thule Sprint Roof Bike Racks Review - 2014 Nissan Frontier

Today on our 2014 Nissan Frontier, we're going to be test fitting the Thule Sprint. This is a fork mounted roof style bike rack. The part number on it, TH528. We've already got our Thule Rapid Traverse Roof Rack System that we've installed on the Frontier, so we'll begin our test fit by placing the rack right up onto the bars. We want our front foot pack to be sitting directly on top of our front and our rear pack foot pack will be sitting directly on top of our rear load bar. Now we'll bring the black rubber coated metal strap up around the underside, fit it up into the small indentations that are located here at the front and then we'll turn the black lever located here on the rear. We can start with our lever straight out. This is going to allow us to take out the slack pretty rapidly and when it gets a little bit tighter, we'll just cam it over into the lever position and continue tightening to get it torqued down.



Swagman Upright Roof Bike Racks Review - 2014 Nissan Frontier

Today on our 2014 Nissan Frontier, we're going to be testing fitting the swagman upright. This is a frame clamp style roof-mounted bike rack. Part number is s64720. We've already got our Thule Rapid Traverse roof rack system installed onto the Nissan, so we'll begin our test fit by placing the rack right up onto the cross bar. At the front we're going to bring one of our metal u bolts around the underside of our bar. We'll fit it p through the head of our rack.



Kuat TRIO Roof Bike Racks Review - 2014 Nissan Frontier

Today on our 2014 Nissan Frontier were going to be test fitting the Kuat Trio. This is a roof mounted fork clamp style bike rack. The part number on this in the black and chrome is TR02. This is also available in a gun metal grey and orange; that part number is RU01. Now we've got our Thule Rapid Traverse roof rack system that we've already installed on the vehicle. Were going to begin our test fit by placing the Trio right up onto the load bars.At the front were going to take one of our black coated metal u-bolts, well slide it up through the underside of the rack, around the underside of our crossbar, through the head of the rack, and then were going to thread on our cylinder nuts. Now one side is going to have a hex pattern, the other side is threaded.



Yakima StickUp Hitch Bike Racks Review - 2014 Nissan Frontier

Today on our 2014 Nissan Frontier, we're going to be test fitting the Yakima StickUp 2 Bike platform style rack for 1-1/4- and 2-inch hitches part #Y02420. We'll begin our test fit by inserting the shank of our rack into the hitch on our vehicle. You'll want to watch for the hitch pinholes to line up. With those in line, we'll take the included anti-rattle hitch bolt, and thread that into place. We'll go ahead and get this hand tight and then we can finish it off with our wrench. Tightening this down will help take any extra play out of the shank of the rack, which helps to eliminate movement overall as you're going down the road.



Yakima FullTilt Hitch Bike Racks Review - 2014 Nissan Frontier

Today on our 2014 Nissan Frontier, we're going to be test fitting the Yakima FullTilt 4-Bike Rack for 1 1/4 inch and two-inch hitches, part number Y02462. We'll begin our test-fit by inserting the shank of the rack into the hitch on our vehicle. You'll notice that the anti-rattle device does move around, so it helps to guide that in. You'll also see here the self-locking hitch pin. You just push it in until you hear that lock into place. spot. You'll then want to tighten down the anti-rattle device, which will help take any extra play out of the shank of the rack, helping to eliminate movement overall as you're going down the road.



Thule Vertex Hitch Bike Racks Review - 2014 Nissan Frontier

Today on our 2014 Nissan Frontier we're going to be test fitting the Thule Vertex 4-bike rack for 1-1/4" and 2" inch hitches. Part Number TH9029. We'll begin our test fit by inserting the shank of the rack into the hitch on our vehicle. You'll want to watch for the hitch pin-holes to line up. With those in line we can take the threaded anti-rattle hitch bolt and thread that into place. We'll go ahead and get this hand-tight and then we can finish it off with our wrench.



Swagman Titan Hitch Bike Racks Review - 2014 Nissan Frontier

Today on our 2014 Nissan Frontier, we're going to be test fitting the Swagman Titan 4 Bike Rack for 1-1/4- and 2-inch hitches, part number S63410. We'll begin our test-fit by inserting the shank of our rack into the hitch on our Frontier. You'll want to watch for the hitch pinholes to line up. With those in line, you can take the threaded anti-rattle hitch bolt, and thread that into place. We'll then take our wrench and finish it off the rest of the way. Tightening this down helps to eliminate any movement in the shank of the rack, which helps eliminate movement overall going down the road.



Softride Element Parallelogram Hitch Bike Racks Review - 2014 Nissan Frontier

Today on our 2014 Nissan Frontier, we're going to be test fitting the Softride Element Parallelogram, 4 bike rack, part number Sr26248. We'll begin our test fit by inserting the shank of the rack into the hitch on our vehicle. You'll notice that there are two hitch pin holes, we're going to go ahead and use the one that's going to give us the most clearance. Once those are lined up, we'll take the threaded hitch bolt and thread that into place. We'll go ahead and get this hand tight, we'll then use our wrench to tighten it up the rest of the way. Tightening this down is going to help remove any play from the shank of the rack, which helps to eliminate movement overall as you're going down the road. The closest point of the rack to the vehicle is going to be at the back of the mast.



Saris Bike Porter Hitch Bike Racks Review - 2014 Nissan Frontier

Today on our 2014 Nissan Frontier we're going to be test fitting the Saris Bike Porter 4 Bike Rack for 1-1/4" and 2" Hitches, part number SA404B. We'll begin our test fit by inserting the shank of the rack into the hitch on our Frontier. You'll want to watch for the hitch pin holes to line up. With those in line we can take the threaded anti-rattle hitch bolt and thread that into place. We'll go ahead and get that in tight and then we can finish it off with our wrench. Tightening this down will help take any extra play out of the shank in the rank, which helps to eliminate movement overall as you're going down the road.



Thule Helium Aero Hitch Bike Racks Review - 2014 Nissan Frontier

Today on our 2014 Nissan Frontier, we're going to be test fitting the Thule Helium Aero. This is a folding and tilting 2 bike rack. They've designed it for use with the 1 1/4 or the 2 inch hitches. The part number on it is TH9042. To begin our test fit, we'll slide the shank of the rack right into the receiver tube of our hitch. As we do, we're going to hold out on the attached pin here on the right side, line up our pin holes and place the attached pin into the pin holes. We'll then tighten the black knob.



Swagman XTC4 Hitch Bike Racks Review - 2014 Nissan Frontier

Today on our 2014 Nissan Frontier we're going to be test fitting the Swagman XTC4 bike rack for 2-inch hitches, part number S64665. We'll begin our test fit by inserting the shank of the rack into the hitch on our vehicle. You'll want to watch for the hitch pin holes to line up. With those in line, we'll take the threaded anti-rattle hitch lock and thread that into place. You may have to wiggle the rack around a little bit as you're trying to tighten it down. Once you have that hand tight, we'll take our wrench and finish it off. Tightening this down is going to help take any extra play out of the shank of the rack, which helps to eliminate movement overall as you're going down the road.



Hollywood Racks Traveler Hitch Bike Racks Review - 2014 Nissan Frontier

Today on our 2014 Nissan Frontier, we're going to be test fitting the Hollywood Traveler, 5 bike rack, for 2 inches hitches. Part Number Hr9200. We'll begin our test fit by inserting the shank of the rack into the hitch on our vehicle. You'll want to watch for the hitch pin holes to line up. With those in line, we can take the included anti-rattle hitch bolt and thread that into place. Once you have this hand tight, we can take our wrench and finish it off.



Hollywood Racks Traveler Hitch Bike Racks Review - 2014 Nissan Frontier hr8500

Today on our 2014 Nissan Frontier, we're going to be test fitting the Hollywood Traveler, 4 bike rack for inch and a quarter and 2 inch hitches. Part number Hr8500. We'll begin our test fit by inserting the shank of the rack into the hitch on our vehicle. You'll want to watch for the hitch pin holes to line up. With those in line, we'll insert the threaded, anti-rattle hitch pin. Now the bolt's in there and you want to make sure that it's lined up.



Saris Thelma Hitch Bike Racks Review - 2014 Nissan Frontier

Today on our 2014 Nissan Frontier we're going to be test fitting the Saris Thelma 3 Bike Platform style rack for 1-1/4- and 2-inch hitches, part #SA4239B. We'll begin our test fit by inserting the shank of the rack into the hitch on our vehicle. You'll want to watch for the hitch pin holes to line up. With those in-line we can take the included threaded anti-rattle hitch bolt and thread that into place. We'll go ahead and get this hand tight. Once we have it hand tight, we can finish it off with our wrench.



Saris Axis Hitch Bike Racks Review - 2014 Nissan Frontier

Today, on our 2014 Nissan Frontier, we're going to be test fitting the Saris Axis 3 Bike Rack for 1-1/4 and 2-inch hitches, part number SA843B. We'll begin our test fit by inserting the shank of the rack into the hitch on our Frontier. You'll want to watch for the hitch pin holes to line up. With those in line, we can take the threaded anti-rattle hitch bolt lock, thread that into place. If you have a hard time tightening it down, just move it around and get it in a better place. We'll go ahead and get this hand tight.



Softride Dura Parallelogram Hitch Bike Racks Review - 2014 Nissan Frontier

Today on our 2014 Nissan Frontier, we're going to be test fitting the Softride Dura Parallelogram 4 Bike Rack, part number SR26247. We'll begin our test fit by inserting the shank of the rack into the hitch on our vehicle. You'll want to watch for the hitch pin holes to line up. There are two hitch pins on this, we're going to use the one that's going to give us the most clearance. You'll then take the threaded anti-rattle hitch lock, thread that into place. Once you have that hand-tight, we'll take our wrench, we'll finish it off. Tightening this down is going to help take any extra play out of the shank of the rack, which helps eliminate movement overall as you're going down the road.





2014 Nissan Frontier Bike Rack Questions